Extensions to Automatic Certificate Management Environment for End-User S/MIME Certificates

Use of ACME for Issuing End-User S/MIME Certificates ACME defines a "dns" identifier type that is used to verify that a particular entity has control over a domain or specific service associated with the domain. In order to be able to issue end-user S/MIME certificates, ACME needs a new identifier type that proves ownership of an email address. This document defines a new identifier type, "email", which corresponds to an email address. The address can be all ASCII or internationalized ; when an internationalized email address is used, the domain part can contain both U-labels and A-labels . This can be used with S/MIME or another similar service that requires possession of a certificate tied to an email address. Any identifier of type "email" in a newOrder request MUST NOT have a wildcard ("*") character in its value. A new challenge type, "email-reply-00", is used with the "email" identifier type, which provides proof that an ACME client has control over an email address. The process of issuing an S/MIME certificate works as follows. Note that the ACME client can be a standalone application (if the MUA is not ACME-email-aware) or can be a component of the MUA.

An end user initiates issuance of an S/MIME certificate for one of their email addresses. This might be done by using an email client UI, by running a command-line tool, by visiting a certificate authority web page, etc. This document doesn't prescribe a specific UI used to initiate S/MIME certificate issuance or where the ACME client is located.
The ACME-email-aware client component begins the certificate issuance process by sending a POST request to the server's newOrder resource, including the identifier of type "email". See for more details.
The ACME server responds to the POST request, including an "authorizations" URL for the requested email address. The ACME client then retrieves information about the corresponding "email-reply-00" challenge, as specified in . The "token" field of the corresponding challenge object (from the "challenges" array) contains token-part2. token-part2 should contain at least 128 bits of entropy. The "type" field of the challenge object is "email-reply-00". The challenge object also contains the "from" field, with the email address that would be used in the From header field of the "challenge" email message (see the next step). An example challenge object might look like this:
After responding to the authorization request, the ACME server generates another token and a "challenge" email message with the subject "ACME: <token-part1>", where <token-part1> is the base64url-encoded form of the token. The ACME server MUST generate a fresh token for each S/MIME issuance request (authorization request), and token-part1 MUST contain at least 128 bits of entropy. The "challenge" email message structure is described in more details in .
The MUA retrieves and parses the "challenge" email message. If the MUA is ACME-email-aware, it ignores any "challenge" email that is not expected, e.g., if there is no ACME certificate issuance pending. The ACME-email-aware MUA also ignores any "challenge" email that has the Subject header field that indicates that it is an email reply, e.g., a subject starting with the reply prefix "Re:".
The ACME client concatenates "token-part1" (received over email) and "token-part2" (received over HTTPS ) to create the ACME "token" and calculates keyAuthorization (as per ). Then, it returns the base64url-encoded SHA-256 digest of the key authorization. The MUA returns the base64url-encoded SHA-256 digest obtained from the ACME client in the body of a "response" email message. The "response" email message structure is described in more details in . If the MUA is ACME-email-aware, it MUST NOT respond to the same "challenge" email more than once.
Once the MUA sends the "response" email, the ACME client notifies the ACME server by POST to the challenge URL ("url" field).
The ACME client can start polling the authorization URL (using POST-as-GET requests) to see if the ACME server received and validated the "response" email message. (See for more details.) If the "status" field of the challenge switches to "valid", then the ACME client can proceed with request finalization. The Certificate Signing Request (CSR) MUST indicate the exact same set of requested identifiers as the initial newOrder request. For an identifier of type "email", the PKCS#10 CSR MUST contain the requested email address in an extensionRequest attribute requesting a subjectAltName extension. The email address MUST also match the From header field value of the "response" email message.
In order to request generation of signing-only or encryption-only S/MIME certificates (as opposed to requesting generation of S/MIME certificates suitable for both), the CSR needs to include the key usage extension (see ). This is described in more details in .
If a request to finalize an order is successful, the ACME server will return a 200 (OK) with an updated order object. If the certificate is issued successfully, i.e., if the order "status" is "valid", then the ACME client can download the issued S/MIME certificate from the URL specified in the "certificate" field.

ACME "Challenge" Email A "challenge" email message MUST have the following structure:

The Subject header field has the following syntax: "ACME: <token-part1>", where the prefix "ACME:" is followed by folding white space (FWS; see ) and then by <token-part1>, which is the base64url-encoded first part of the ACME token that MUST be at least 128 bits long after decoding. Due to the recommended 78-octet line-length limit in , the subject line can be folded, so white spaces (if any) within the <token-part1> MUST be ignored. encoding of the Subject header field MUST be supported, and, when used, only the "UTF-8" and "US-ASCII" charsets are allowed; other charsets MUST NOT be used. The US-ASCII charset SHOULD be used.
The From header field MUST be the same email address as specified in the "from" field of the challenge object.
The To header field MUST be the email address of the entity that requested the S/MIME certificate to be generated.
The message MAY contain a Reply-To and/or CC header field.
The message MUST include the Auto-Submitted header field with the value "auto-generated" . To aid in debugging (and, for some implementations, to make automated processing easier), the Auto-Submitted header field SHOULD include the "type=acme" parameter. It MAY include other optional parameters, as allowed by the syntax of the Auto-Submitted header field.
In order to prove authenticity of a challenge message, it MUST be signed using either DomainKeys Identified Mail (DKIM) or S/MIME .
- If DKIM signing is used, the resulting DKIM-Signature header field MUST contain the "h=" tag that includes at least the From, Sender, Reply-To, To, CC, Subject, Date, In-Reply-To, References, Message-ID, Auto-Submitted, Content-Type, and Content-Transfer-Encoding header fields. The DKIM-Signature header field's "h=" tag SHOULD also include the Resent-Date, Resent-From, Resent-To, Resent-Cc, List-Id, List-Help, List-Unsubscribe, List-Subscribe, List-Post, List-Owner, List-Archive, and List-Unsubscribe-Post header fields. The domain from the "d=" tag of the DKIM-Signature header field MUST be the same as the domain from the From header field of the "challenge" email.
- If S/MIME signing is used, the certificate corresponding to the signer MUST have an rfc822Name subjectAltName extension with the value equal to the From header field email address of the "challenge" email.
The body of the challenge message is not used for automated processing, so it can be any media type. (However, there are extra requirements on S/MIME signing, if used. See below.) Typically, it is text/plain or text/html containing a human-readable explanation of the purpose of the message. If S/MIME signing is used to prove authenticity of the challenge message, then the multipart/signed or "application/pkcs7-mime; smime-type=signed-data;" media type should be used. Either way, it MUST use S/MIME header protection.

An email client compliant with this specification that detects that a particular "challenge" email fails the validation described above MUST ignore the challenge and thus will not generate a "response" email. To aid in debugging, such failed validations SHOULD be logged. Here is an example of an ACME "challenge" email (note that, for simplicity, DKIM-related header fields are not included).

From: acme-generator@example.org To: alexey@example.com Subject: ACME: LgYemJLy3F1LDkiJrdIGbEzyFJyOyf6vBdyZ1TG3sME= Content-Type: text/plain MIME-Version: 1.0 This is an automatically generated ACME challenge for email address "alexey@example.com". If you haven't requested an S/MIME certificate generation for this email address, be very afraid. If you did request it, your email client might be able to process this request automatically, or you might have to paste the first token part into an external program. ]]>

ACME "Response" Email A valid "response" email message MUST have the following structure:

The Subject header field is formed as a reply to the ACME "challenge" email (see ). Its syntax is the same as that of the challenge message except that it may be prefixed by a US-ASCII reply prefix (typically "Re:") and FWS (see ), as is normal in reply messages. When parsing the subject, ACME servers MUST decode encoding (if any), and then they can ignore any prefix before the "ACME:" label.
The From header field contains the email address of the user that is requesting S/MIME certificate issuance.
The To header field of the response contains the value from the Reply-To header field from the challenge message (if set). Otherwise, it contains the value from the From header field of the challenge message.
The Cc header field is ignored if present in the "response" email message.
The In-Reply-To header field SHOULD be set to the Message-ID header field of the challenge message according to rules in .
List-* header fields MUST be absent (i.e., the reply can't come from a mailing list).
The media type of the "response" email message is either text/plain or multipart/alternative , containing text/plain as one of the alternatives. (Note that the requirement to support multipart/alternative is to allow use of ACME-unaware MUAs, which can't always generate pure text/plain, e.g., if they reply to a text/html). The text/plain body part (whether or not it is inside multipart/alternative) MUST contain a block of lines starting with the line "-----BEGIN ACME RESPONSE-----", followed by one or more lines containing the base64url-encoded SHA-256 digest of the key authorization, calculated from concatenated token-part1 (received over email) and token-part2 (received over HTTPS), as outlined in the 5th bullet in . (Note that each line of text/plain is terminated by CRLF. Bare LFs or bare CRs are not allowed.) Due to historical line-length limitations in email, line endings (CRLFs) can be freely inserted in the middle of the encoded digest, so they MUST be ignored when processing it. The final line of the encoded digest is followed by a line containing: Any text before and after this block is ignored. For example, such text might explain what to do with it for ACME-unaware clients.
There is no need to use any Content-Transfer-Encoding other than 7bit for the text/plain body part. Use of quoted-printable or base64 in a "response" email message is not necessary and should be avoided, though it is permitted.
In order to prove authenticity of a response message, it MUST be DKIM signed. The resulting DKIM-Signature header field MUST contain the "h=" tag that includes at least the From, Sender, Reply-To, To, CC, Subject, Date, In-Reply-To, References, Message-ID, Content-Type, and Content-Transfer-Encoding header fields. The DKIM-Signature header field's "h=" tag SHOULD also include the Resent-Date, Resent-From, Resent-To, Resent-Cc, List-Id, List-Help, List-Unsubscribe, List-Subscribe, List-Post, List-Owner, List-Archive, and List-Unsubscribe-Post header fields. The domain from the "d=" tag of DKIM-Signature header field MUST be the same as the domain from the From header field of the "response" email.

Here is an example of an ACME "response" email (note that, for simplicity, DKIM-related header fields are not included).

In-Reply-To: From: alexey@example.com To: acme-generator@example.org Subject: Re: ACME: LgYemJLy3F1LDkiJrdIGbEzyFJyOyf6vBdyZ1TG3sME= Content-Type: text/plain MIME-Version: 1.0 -----BEGIN ACME RESPONSE----- LoqXcYV8q5ONbJQxbmR7SCTNo3tiAXDfowy jxAjEuX0= -----END ACME RESPONSE----- ]]>

Generating Encryption-Only or Signing-Only S/MIME Certificates ACME extensions specified in this document can be used to request signing-only or encryption-only S/MIME certificates. In order to request signing-only S/MIME certificates, the CSR MUST include the key usage extension with digitalSignature and/or nonRepudiation bits set and no other bits set. In order to request encryption-only S/MIME certificates, the CSR MUST include the key usage extension with keyEncipherment or keyAgreement bits set and no other bits set. Presence of both of the above sets of key usage bits in the CSR, as well as absence of the key usage extension in the CSR, signals to the ACME server to issue an S/MIME certificate suitable for both signing and encryption.

Label	Identifier Type	ACME	Reference
email-reply-00	email	Y	RFC 8823

Security Considerations Please see the Security Considerations section of for general security considerations related to the use of ACME. This challenge/response protocol demonstrates that an entity that controls the private key (corresponding to the public key in the certificate) also controls the named email account. The ACME server is confirming that the requested email address belongs to the entity that requested the certificate, but this makes no claim to address correctness or fitness for purpose. If such claims are needed, they must be obtained by some other mechanism. The security of the "email-reply-00" challenge type depends on the security of the email system. A third party that can read and reply to user's email messages (by possessing a user's password or a secret derived from it that can give read and reply access, such as "password equivalent" information, or by being given permissions to act on a user's behalf using email delegation features common in some email systems) can request S/MIME certificates using the protocol specified in this document and is indistinguishable from the email account owner. This has several possible implications:

An entity that compromised an email account would be able to request S/MIME certificates using the protocol specified in this document, and such entity couldn't be distinguished from the legitimate email account owner (unless some external sources of information are consulted).
For email addresses with legitimate shared access/control by multiple users, any such user would be able to request S/MIME certificates using the protocol specified in this document; such requests can't be attributed to a specific user without consulting external systems (such as IMAP/SMTP access logs).
The protocol specified in this document is not suitable for use with email addresses associated with mailing lists . While it is not always possible to guarantee that a particular S/MIME certificate request is not from a mailing list address, prohibition on inclusion of List-* header fields helps certificate issuers to handle most common cases.

An email system in its turn depends on DNS. A third party that can manipulate DNS MX records for a domain might be able to redirect an email and can get (at least temporary) read and reply access to it. Similar considerations apply to DKIM TXT records in DNS. Use of DNSSEC by email system administrators is recommended to avoid making it easy to spoof DNS records affecting an email system. However, use of DNSSEC is not ubiquitous at the time of publishing of this document, so it is not required here. Also, many existing systems that rely on verification of ownership of an email address -- for example, 2-factor authentication systems used by banks or traditional certificate issuance systems -- send email messages to email addresses, expecting the owner to click on the link supplied in them (or to reply to a message), without requiring use of DNSSEC. So the risk of not requiring DNSSEC is presumed acceptable in this document. An ACME email challenge message can be forged by an attacker. As per requirements on an ACME-email-aware MUA specified in , the MUA will not respond to requests it is not expecting. Even if the attacker causes the erroneous "response" email to go to an attacker-controlled email address, very little information is leaked -- the SHA-256 hash of the key authorization would be leaked, not the key authorization itself, so no parts of the token or the account key thumbprint are leaked. An attacker that can read the "response" email has only one chance to guess the token-part2. Even if the attacker can guess it right, it still needs to know the ACME account key to be able to make use of the intercepted SHA-256 hash of the key authorization. Also see the Security Considerations section of for details on how DKIM depends on the DNS and the respective vulnerabilities this dependence has.