Mozilla

martin.thomson@gmail.com

ALPN Protocol Identifier This document specifies two Application-Layer Protocol Negotiation (ALPN) labels for use with Web Real-Time Communication (WebRTC). The "webrtc" label identifies regular WebRTC: a DTLS session that is used to establish keys for the Secure Real-time Transport Protocol (SRTP) or to establish data channels using the Stream Control Transmission Protocol (SCTP) over DTLS. The "c-webrtc" label describes the same protocol, but the peers also agree to maintain the confidentiality of the media by not sharing it with other applications.

Status of This Memo This is an Internet Standards Track document. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at .

Copyright Notice Copyright (c) 2021 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents () in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

Table of Contents

• .  Introduction
  • .  Conventions
• .  ALPN Labels for WebRTC
• .  Media Confidentiality
• .  Security Considerations
• .  IANA Considerations
• .  References
  • .  Normative References
  • .  Informative References
• Author's Address

Introduction Web Real-Time Communication (WebRTC) uses Datagram Transport Layer Security (DTLS) to secure all peer-to-peer communications. Identifying WebRTC protocol usage with Application-Layer Protocol Negotiation (ALPN) enables an endpoint to positively identify WebRTC uses and distinguish them from other DTLS uses. Different WebRTC uses can be advertised and behavior can be constrained to what is appropriate to a given use. In particular, this allows for the identification of sessions that require confidentiality protection from the application that manages the signaling for the session.

Conventions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 when, and only when, they appear in all capitals, as shown here.

ALPN Labels for WebRTC The following identifiers are defined for use in ALPN:

webrtc:

The DTLS session is used to establish keys for the Secure Real-time Transport Protocol (SRTP) -- known as DTLS-SRTP -- as described in . The DTLS record layer is used for WebRTC data channels.

c-webrtc:

The DTLS session is used for confidential WebRTC, where peers agree to maintain the confidentiality of the media, as described in . The confidentiality protections ensure that media is protected from other applications, but the confidentiality protections do not extend to messages on data channels.

Both identifiers describe the same basic protocol: a DTLS session that is used to provide keys for an SRTP session in combination with WebRTC data channels. Either SRTP or data channels could be absent. The data channels send the Stream Control Transmission Protocol (SCTP) over the DTLS record layer, which can be multiplexed with SRTP on the same UDP flow. WebRTC requires the use of Interactive Connectivity Establishment (ICE) to establish UDP flow, but this is not covered by the identifier. A more thorough definition of what WebRTC entails is included in . There is no functional difference between the identifiers except that an endpoint negotiating c-webrtc makes a promise to preserve the confidentiality of the media it receives. A peer that is not aware of whether it needs to request confidentiality can use either identifier. A peer in the client role MUST offer both identifiers if it is not aware of a need for confidentiality. A peer in the server role SHOULD select webrtc if it does not prefer either. An endpoint that requires media confidentiality might negotiate a session with a peer that does not support this specification. An endpoint MUST abort a session if it requires confidentiality but does not successfully negotiate c-webrtc. A peer that is willing to accept webrtc SHOULD assume that a peer that does not support this specification has negotiated webrtc unless signaling provides other information; however, a peer MUST NOT assume that c-webrtc has been negotiated unless explicitly negotiated.

Media Confidentiality Private communications in WebRTC depend on separating control (i.e., signaling) capabilities and access to media . In this way, an application can establish a session that is end-to-end confidential, where the ends in question are user agents (or browsers) and not the signaling application. This allows an application to manage signaling for a session without having access to the media that is exchanged in the session. Without some form of indication that is securely bound to the session, a WebRTC endpoint is unable to properly distinguish between a session that requires this confidentiality protection and one that does not. The ALPN identifier provides that signal. A browser is required to enforce this confidentiality protection using isolation controls similar to those used in content cross-origin protections (see the "Origin" section of ). These protections ensure that media is protected from applications, which are not able to read or modify the contents of a protected flow of media. Media that is produced from a session using the c-webrtc identifier MUST only be displayed to users. The promise to apply confidentiality protections do not apply to data that is sent using data channels. Confidential data depends on having both data sources and consumers that are exclusively browser or user based. No mechanisms currently exist to take advantage of data confidentiality, though some use cases suggest that this could be useful, for example, confidential peer-to-peer file transfer. Alternative labels might be provided in the future to support these use cases. This mechanism explicitly does not define a specific authentication method; a WebRTC endpoint that accepts a session with this ALPN identifier MUST respect confidentiality no matter what identity is attributed to a peer. RTP middleboxes and entities that forward media or data cannot promise to maintain confidentiality. Any entity that forwards content, or records content for later access by entities other than the authenticated peer, MUST NOT offer or accept a session with the c-webrtc identifier.

Security Considerations Confidential communications depend on more than just an agreement from browsers. Information is not confidential if it is displayed to others than for whom it is intended. Peer authentication is necessary to ensure that data is only sent to the intended peer. This is not a digital rights management mechanism. A user is not prevented from using other mechanisms to record or forward media. This means that (for example) screen-recording devices, tape recorders, portable cameras, or a cunning arrangement of mirrors could variously be used to record or redistribute media once delivered. Similarly, if media is visible or audible (or otherwise accessible) to others in the vicinity, there are no technical measures that protect the confidentiality of that media. The only guarantee provided by this mechanism and the browser that implements it is that the media was delivered to the user that was authenticated. Individual users will still need to make a judgment about how their peer intends to respect the confidentiality of any information provided. On a shared computing platform like a browser, other entities with access to that platform (i.e., web applications) might be able to access information that would compromise the confidentiality of communications. Implementations MAY choose to limit concurrent access to input devices during confidential communications sessions. For instance, another application that is able to access a microphone might be able to sample confidential audio that is playing through speakers. This is true even if acoustic echo cancellation, which attempts to prevent this from happening, is used. Similarly, an application with access to a video camera might be able to use reflections to obtain all or part of a confidential video stream.

IANA Considerations The following two entries have been added to the "TLS Application-Layer Protocol Negotiation (ALPN) Protocol IDs" registry established by :

webrtc:

The webrtc label identifies mixed media and data communications using SRTP and data channels:

Protocol:

WebRTC Media and Data

Identification Sequence:

0x77 0x65 0x62 0x72 0x74 0x63 ("webrtc")

Specification:

RFC 8833 (this document)

c-webrtc:

The c-webrtc label identifies WebRTC with a promise to protect media confidentiality:

Protocol:

Confidential WebRTC Media and Data

Identification Sequence:

0x63 0x2d 0x77 0x65 0x62 0x72 0x74 0x63 ("c-webrtc")

Specification:

RFC 8833 (this document)

References Normative References In many standards track documents several words are used to signify the requirements in the specification. These words are often capitalized. This document defines these words as they should be interpreted in IETF documents. This document specifies an Internet Best Current Practices for the Internet Community, and requests discussion and suggestions for improvements. This document describes a Datagram Transport Layer Security (DTLS) extension to establish keys for Secure RTP (SRTP) and Secure RTP Control Protocol (SRTCP) flows. DTLS keying happens on the media path, independent of any out-of-band signalling channel present. [STANDARDS-TRACK] This document specifies version 1.2 of the Datagram Transport Layer Security (DTLS) protocol. The DTLS protocol provides communications privacy for datagram protocols. The protocol allows client/server applications to communicate in a way that is designed to prevent eavesdropping, tampering, or message forgery. The DTLS protocol is based on the Transport Layer Security (TLS) protocol and provides equivalent security guarantees. Datagram semantics of the underlying transport are preserved by the DTLS protocol. This document updates DTLS 1.0 to work with TLS version 1.2. [STANDARDS-TRACK] This document describes a Transport Layer Security (TLS) extension for application-layer protocol negotiation within the TLS handshake. For instances in which multiple application protocols are supported on the same TCP or UDP port, this extension allows the application layer to negotiate which protocol will be used within the TLS connection. RFC 2119 specifies common key words that may be used in protocol specifications. This document aims to reduce the ambiguity by clarifying that only UPPERCASE usage of the key words have the defined special meanings. Informative References WHATWG Section 7.5 This document obsoletes RFC 2960 and RFC 3309. It describes the Stream Control Transmission Protocol (SCTP). SCTP is designed to transport Public Switched Telephone Network (PSTN) signaling messages over IP networks, but is capable of broader applications. SCTP is a reliable transport protocol operating on top of a connectionless packet network such as IP. It offers the following services to its users: -- acknowledged error-free non-duplicated transfer of user data, -- data fragmentation to conform to discovered path MTU size, -- sequenced delivery of user messages within multiple streams, with an option for order-of-arrival delivery of individual user messages, -- optional bundling of multiple user messages into a single SCTP packet, and -- network-level fault tolerance through supporting of multi-homing at either or both ends of an association. The design of SCTP includes appropriate congestion avoidance behavior and resistance to flooding and masquerade attacks. [STANDARDS-TRACK] This document describes a protocol for Network Address Translator (NAT) traversal for UDP-based communication. This protocol is called Interactive Connectivity Establishment (ICE). ICE makes use of the Session Traversal Utilities for NAT (STUN) protocol and its extension, Traversal Using Relay NAT (TURN). This document obsoletes RFC 5245.

Author's Address Mozilla

martin.thomson@gmail.com