Ericsson

Jorvas 02420 Finland jari.arkko@piuha.net

Ericsson

Jorvas 02420 Finland vesa.lehtovirta@ericsson.com

Ericsson

Jorvas 02420 Finland vesa.torvinen@ericsson.com

Independent

Finland pe@iki.fi

EAP AKA AKA' 3GPP The 3GPP mobile network Authentication and Key Agreement (AKA) is an authentication mechanism for devices wishing to access mobile networks. RFC 4187 (EAP-AKA) made the use of this mechanism possible within the Extensible Authentication Protocol (EAP) framework. RFC 5448 (EAP-AKA') was an improved version of EAP-AKA. This document is the most recent specification of EAP-AKA', including, for instance, details about and references related to operating EAP-AKA' in 5G networks. EAP-AKA' differs from EAP-AKA by providing a key derivation function that binds the keys derived within the method to the name of the access network. The key derivation function has been defined in the 3rd Generation Partnership Project (3GPP). EAP-AKA' allows its use in EAP in an interoperable manner. EAP-AKA' also updates the algorithm used in hash functions, as it employs SHA-256 / HMAC-SHA-256 instead of SHA-1 / HMAC-SHA-1, which is used in EAP-AKA. This version of the EAP-AKA' specification defines the protocol behavior for both 4G and 5G deployments, whereas the previous version defined protocol behavior for 4G deployments only. While EAP-AKA' as defined in RFC 5448 is not obsolete, this document defines the most recent and fully backwards-compatible specification of EAP-AKA'. This document updates both RFCs 4187 and 5448.

Status of This Memo This document is not an Internet Standards Track specification; it is published for informational purposes. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Not all documents approved by the IESG are candidates for any level of Internet Standard; see Section 2 of RFC 7841. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at .

Copyright Notice Copyright (c) 2021 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents () in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

Table of Contents

• .  Introduction
• .  Requirements Language
• .  EAP-AKA'
  • .  AT_KDF_INPUT
  • .  AT_KDF
  • .  Key Derivation
  • .  Hash Functions
    • .  PRF'
    • .  AT_MAC
    • .  AT_CHECKCODE
  • .  Summary of Attributes for EAP-AKA'
• .  Bidding Down Prevention for EAP-AKA
  • .  Summary of Attributes for EAP-AKA
• .  Peer Identities
  • .  Username Types in EAP-AKA' Identities
  • .  Generating Pseudonyms and Fast Re-Authentication Identities
  • .  Identifier Usage in 5G
    • .  Key Derivation
    • .  EAP Identity Response and EAP-AKA' AT_IDENTITY Attribute
• .  Exported Parameters
• .  Security Considerations
  • .  Privacy
  • .  Discovered Vulnerabilities
  • .  Pervasive Monitoring
  • .  Security Properties of Binding Network Names
• .  IANA Considerations
  • .  Type Value
  • .  Attribute Type Values
  • .  Key Derivation Function Namespace
• .  References
  • .  Normative References
  • .  Informative References
• .  Changes from RFC 5448
• .  Changes to RFC 4187
• .  Importance of Explicit Negotiation
• .  Test Vectors
• Acknowledgments
• Contributors
• Authors' Addresses

Introduction The 3GPP mobile network Authentication and Key Agreement (AKA) is an authentication mechanism for devices wishing to access mobile networks. (EAP-AKA) made the use of this mechanism possible within the Extensible Authentication Protocol (EAP) framework . EAP-AKA' is an improved version of EAP-AKA. EAP-AKA' was defined in RFC 5448 , and it updated EAP-AKA . This document is the most recent specification of EAP-AKA', including, for instance, details about and references related to operating EAP-AKA' in 5G networks. This document does not obsolete RFC 5448; however, this document is the most recent and fully backwards-compatible specification. EAP-AKA' is commonly implemented in mobile phones and network equipment. It can be used for authentication to gain network access via Wireless LAN networks and, with 5G, also directly to mobile networks. EAP-AKA' differs from EAP-AKA by providing a different key derivation function. This function binds the keys derived within the method to the name of the access network. This limits the effects of compromised access network nodes and keys. EAP-AKA' also updates the algorithm used for hash functions. The EAP-AKA' method employs the derived keys CK' and IK' from the 3GPP specification and updates the hash function that is used to SHA-256 and HMAC to HMAC-SHA-256. Otherwise, EAP-AKA' is equivalent to EAP-AKA. Given that a different EAP method Type value is used for EAP-AKA and EAP-AKA', a mutually supported method may be negotiated using the standard mechanisms in EAP . Note that any change of the key derivation must be unambiguous to both sides in the protocol. That is, it must not be possible to accidentally connect old equipment to new equipment and get the key derivation wrong or to attempt to use incorrect keys without getting a proper error message. See for further information. Note also that choices in authentication protocols should be secure against bidding down attacks that attempt to force the participants to use the least secure function. See for further information. This specification makes the following changes from RFC 5448:

• Updates the reference that specifies how the Network Name field is constructed in the protocol. This update ensures that EAP-AKA' is compatible with 5G deployments. RFC 5448 referred to the Release 8 version of . This document points to the first 5G version, Release 16.
• Specifies how EAP and EAP-AKA' use identifiers in 5G. Additional identifiers are introduced in 5G, and for interoperability, it is necessary that the right identifiers are used as inputs in the key derivation. In addition, for identity privacy it is important that when privacy-friendly identifiers in 5G are used, no trackable, permanent identifiers are passed in EAP-AKA', either.
• Specifies session identifiers and other exported parameters, as those were not specified in despite requirements set forward in to do so. Also, while specified session identifiers for EAP-AKA, it only did so for the full authentication case, not for the case of fast re-authentication.
• Updates the requirements on generating pseudonym usernames and fast re-authentication identities to ensure identity privacy.
• Describes what has been learned about any vulnerabilities in AKA or EAP-AKA'.
• Describes the privacy and pervasive monitoring considerations related to EAP-AKA'.
• Adds summaries of the attributes.

Some of the updates are small. For instance, the reference update to does not change the 3GPP specification number, only the version. But this reference is crucial for the correct calculation of the keys that result from running the EAP-AKA' method, so an RFC update pointing to the newest version was warranted. Note: Any further updates in 3GPP specifications that affect, for instance, key derivation is something that EAP-AKA' implementations need to take into account. Upon such updates, there will be a need to update both this specification and the implementations. It is an explicit non-goal of this specification to include any other technical modifications, addition of new features, or other changes. The EAP-AKA' base protocol is stable and needs to stay that way. If there are any extensions or variants, those need to be proposed as standalone extensions or even as different authentication methods. The rest of this specification is structured as follows. defines the EAP-AKA' method. adds support to EAP-AKA to prevent bidding down attacks from EAP-AKA'. specifies requirements regarding the use of peer identities, including how 5G identifiers are used in the EAP-AKA' context. specifies which parameters EAP-AKA' exports out of the method. explains the security differences between EAP-AKA and EAP-AKA'. describes the IANA considerations, and and explain the updates to RFC 5448 (EAP-AKA') and RFC 4187 (EAP-AKA) that have been made in this specification. explains some of the design rationale for creating EAP-AKA'. Finally, provides test vectors.

Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 when, and only when, they appear in all capitals, as shown here.

EAP-AKA' EAP-AKA' is an EAP method that follows the EAP-AKA specification in all respects except the following:

• It uses the Type code 0x32, not 0x17 (which is used by EAP-AKA).
• It carries the AT_KDF_INPUT attribute, as defined in , to ensure that both the peer and server know the name of the access network.
• It supports key derivation function negotiation via the AT_KDF attribute () to allow for future extensions.
• It calculates keys as defined in , not as defined in EAP-AKA.
• It employs SHA-256 / HMAC-SHA-256 , not SHA-1 / HMAC-SHA-1 (see ).

shows an example of the authentication process. Each message AKA'-Challenge and so on represents the corresponding message from EAP-AKA, but with the EAP-AKA' Type code. The definition of these messages, along with the definition of attributes AT_RAND, AT_AUTN, AT_MAC, and AT_RES can be found in .

EAP-AKA' Authentication Process Peer Server | EAP-Request/Identity | |<-------------------------------------------------------| | | | EAP-Response/Identity | | (Includes user's Network Access Identifier, NAI) | |------------------------------------------------------->| | +--------------------------------------------------+ | | Server determines the network name and ensures | | | that the given access network is authorized to | | | use the claimed name. The server then runs the | | | AKA' algorithms generating RAND and AUTN, and | | | derives session keys from CK' and IK'. RAND and | | | AUTN are sent as AT_RAND and AT_AUTN attributes, | | | whereas the network name is transported in the | | | AT_KDF_INPUT attribute. AT_KDF signals the used | | | key derivation function. The session keys are | | | used in creating the AT_MAC attribute. | | +--------------------------------------------------+ | EAP-Request/AKA'-Challenge | | (AT_RAND, AT_AUTN, AT_KDF, AT_KDF_INPUT, AT_MAC)| |<-------------------------------------------------------| +------------------------------------------------------+ | | The peer determines what the network name should be, | | | based on, e.g., what access technology it is using. | | | The peer also retrieves the network name sent by | | | the network from the AT_KDF_INPUT attribute. The | | | two names are compared for discrepancies, and if | | | necessary, the authentication is aborted. Otherwise,| | | the network name from AT_KDF_INPUT attribute is | | | used in running the AKA' algorithms, verifying AUTN | | | from AT_AUTN and MAC from AT_MAC attributes. The | | | peer then generates RES. The peer also derives | | | session keys from CK'/IK'. The AT_RES and AT_MAC | | | attributes are constructed. | | +------------------------------------------------------+ | | EAP-Response/AKA'-Challenge | | (AT_RES, AT_MAC) | |------------------------------------------------------->| | +--------------------------------------------------+ | | Server checks the RES and MAC values received | | | in AT_RES and AT_MAC, respectively. Success | | | requires both to be found correct. | | +--------------------------------------------------+ | EAP-Success | |<-------------------------------------------------------|

EAP-AKA' can operate on the same credentials as EAP-AKA and employ the same identities. However, EAP-AKA' employs different leading characters than EAP-AKA for the conventions given in for usernames based on International Mobile Subscriber Identifier (IMSI). For 4G networks, EAP-AKA' MUST use the leading character "6" (ASCII 36 hexadecimal) instead of "0" for IMSI-based permanent usernames. For 5G networks, the leading character "6" is not used for IMSI-based permanent usernames. Identifier usage in 5G is specified in . All other usage and processing of the leading characters, usernames, and identities is as defined by EAP-AKA . For instance, the pseudonym and fast re-authentication usernames need to be constructed so that the server can recognize them. As an example, a pseudonym could begin with a leading "7" character (ASCII 37 hexadecimal) and a fast re-authentication username could begin with "8" (ASCII 38 hexadecimal). Note that a server that implements only EAP-AKA may not recognize these leading characters. According to , such a server will re-request the identity via the EAP-Request/AKA-Identity message, making obvious to the peer that EAP-AKA and associated identity are expected.

AT_KDF_INPUT The format of the AT_KDF_INPUT attribute is shown below. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | AT_KDF_INPUT | Length | Actual Network Name Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | . Network Name . . . | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The fields are as follows:

AT_KDF_INPUT

This is set to 23.

Length

The length of the attribute, calculated as defined in .

Actual Network Name Length

This is a 2-byte actual length field, needed due to the requirement that the previous field is expressed in multiples of 4 bytes per the usual EAP-AKA rules. The Actual Network Name Length field provides the length of the network name in bytes.

Network Name

This field contains the network name of the access network for which the authentication is being performed. The name does not include any terminating null characters. Because the length of the entire attribute must be a multiple of 4 bytes, the sender pads the name with 1, 2, or 3 bytes of all zero bits when necessary.

Only the server sends the AT_KDF_INPUT attribute. The value is sent as specified in for both non-3GPP access networks and for 5G access networks. Per , the server always verifies the authorization of a given access network to use a particular name before sending it to the peer over EAP-AKA'. The value of the AT_KDF_INPUT attribute from the server MUST be non-empty, with a greater than zero length in the Actual Network Name Length field. If the AT_KDF_INPUT attribute is empty, the peer behaves as if AUTN had been incorrect and authentication fails. See Section and Figure 3 of for an overview of how authentication failures are handled. In addition, the peer MAY check the received value against its own understanding of the network name. Upon detecting a discrepancy, the peer either warns the user and continues, or fails the authentication process. More specifically, the peer SHOULD have a configurable policy that it can follow under these circumstances. If the policy indicates that it can continue, the peer SHOULD log a warning message or display it to the user. If the peer chooses to proceed, it MUST use the network name as received in the AT_KDF_INPUT attribute. If the policy indicates that the authentication should fail, the peer behaves as if AUTN had been incorrect and authentication fails. The Network Name field contains a UTF-8 string. This string MUST be constructed as specified in for "Access Network Identity". The string is structured as fields separated by colons (:). The algorithms and mechanisms to construct the identity string depend on the used access technology. On the network side, the network name construction is a configuration issue in an access network and an authorization check in the authentication server. On the peer, the network name is constructed based on the local observations. For instance, the peer knows which access technology it is using on the link, it can see information in a link-layer beacon, and so on. The construction rules specify how this information maps to an access network name. Typically, the network name consists of the name of the access technology or the name of the access technology followed by some operator identifier that was advertised in a link-layer beacon. In all cases, is the normative specification for the construction in both the network and peer side. If the peer policy allows running EAP-AKA' over an access technology for which that specification does not provide network name construction rules, the peer SHOULD rely only on the information from the AT_KDF_INPUT attribute and not perform a comparison. If a comparison of the locally determined network name and the one received over EAP-AKA' is performed on the peer, it MUST be done as follows. First, each name is broken down to the fields separated by colons. If one of the names has more colons and fields than the other one, the additional fields are ignored. The remaining sequences of fields are compared, and they match only if they are equal character by character. This algorithm allows a prefix match where the peer would be able to match "", "FOO", and "FOO:BAR" against the value "FOO:BAR" received from the server. This capability is important in order to allow possible updates to the specifications that dictate how the network names are constructed. For instance, if a peer knows that it is running on access technology "FOO", it can use the string "FOO" even if the server uses an additional, more accurate description, e.g., "FOO:BAR", that contains more information. The allocation procedures in ensure that conflicts potentially arising from using the same name in different types of networks are avoided. The specification also has detailed rules about how a client can determine these based on information available to the client, such as the type of protocol used to attach to the network, beacons sent out by the network, and so on. Information that the client cannot directly observe (such as the type or version of the home network) is not used by this algorithm. The AT_KDF_INPUT attribute MUST be sent and processed as explained above when AT_KDF attribute has the value 1. Future definitions of new AT_KDF values MUST define how this attribute is sent and processed.

AT_KDF AT_KDF is an attribute that the server uses to reference a specific key derivation function. It offers a negotiation capability that can be useful for future evolution of the key derivation functions. The format of the AT_KDF attribute is shown below. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | AT_KDF | Length | Key Derivation Function | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The fields are as follows:

AT_KDF

This is set to 24.

Length

The length of the attribute, calculated as defined in . For AT_KDF, the Length field MUST be set to 1.

Key Derivation Function

An enumerated value representing the key derivation function that the server (or peer) wishes to use. Value 1 represents the default key derivation function for EAP-AKA', i.e., employing CK' and IK' as defined in .

Servers MUST send one or more AT_KDF attributes in the EAP-Request/AKA'-Challenge message. These attributes represent the desired functions ordered by preference, the most preferred function being the first attribute. Upon receiving a set of these attributes, if the peer supports and is willing to use the key derivation function indicated by the first attribute, the function is taken into use without any further negotiation. However, if the peer does not support this function or is unwilling to use it, it does not process the received EAP-Request/AKA'-Challenge in any way except by responding with the EAP-Response/AKA'-Challenge message that contains only one attribute, AT_KDF with the value set to the selected alternative. If there is no suitable alternative, the peer behaves as if AUTN had been incorrect and authentication fails (see Figure 3 of ). The peer fails the authentication also if there are any duplicate values within the list of AT_KDF attributes (except where the duplication is due to a request to change the key derivation function; see below for further information). Upon receiving an EAP-Response/AKA'-Challenge with AT_KDF from the peer, the server checks that the suggested AT_KDF value was one of the alternatives in its offer. The first AT_KDF value in the message from the server is not a valid alternative since the peer should have accepted it without further negotiation. If the peer has replied with the first AT_KDF value, the server behaves as if AT_MAC of the response had been incorrect and fails the authentication. For an overview of the failed authentication process in the server side, see Section and Figure 2 of . Otherwise, the server re-sends the EAP-Response/AKA'-Challenge message, but adds the selected alternative to the beginning of the list of AT_KDF attributes and retains the entire list following it. Note that this means that the selected alternative appears twice in the set of AT_KDF values. Responding to the peer's request to change the key derivation function is the only legal situation where such duplication may occur. When the peer receives the new EAP-Request/AKA'-Challenge message, it MUST check that the requested change, and only the requested change, occurred in the list of AT_KDF attributes. If so, it continues with processing the received EAP-Request/AKA'-Challenge as specified in and of this document. If not, it behaves as if AT_MAC had been incorrect and fails the authentication. If the peer receives multiple EAP-Request/AKA'-Challenge messages with differing AT_KDF attributes without having requested negotiation, the peer MUST behave as if AT_MAC had been incorrect and fail the authentication. Note that the peer may also request sequence number resynchronization . This happens after AT_KDF negotiation has already completed. That is, the EAP-Request/AKA'-Challenge and, possibly, the EAP-Response/AKA'-Challenge messages are exchanged first to determine a mutually acceptable key derivation function, and only then is the possible AKA'-Synchronization-Failure message sent. The AKA'-Synchronization-Failure message is sent as a response to the newly received EAP-Request/AKA'-Challenge, which is the last message of the AT_KDF negotiation. Note that if the first proposed KDF is acceptable, then the first EAP-Request/AKA'-Challenge message is also the last message. The AKA'-Synchronization-Failure message MUST contain the AUTS parameter as specified in and a copy the AT_KDF attributes as they appeared in the last message of the AT_KDF negotiation. If the AT_KDF attributes are found to differ from their earlier values, the peer and server MUST behave as if AT_MAC had been incorrect and fail the authentication.

Key Derivation Both the peer and server MUST derive the keys as follows.

AT_KDF parameter has the value 1

In this case, MK is derived and used as follows: MK = PRF'(IK'|CK',"EAP-AKA'"|Identity) K_encr = MK[0..127] K_aut = MK[128..383] K_re = MK[384..639] MSK = MK[640..1151] EMSK = MK[1152..1663] Here [n..m] denotes the substring from bit n to m, including bits n and m. PRF' is a new pseudorandom function specified in . The first 1664 bits from its output are used for K_encr (encryption key, 128 bits), K_aut (authentication key, 256 bits), K_re (re-authentication key, 256 bits), MSK (Master Session Key, 512 bits), and EMSK (Extended Master Session Key, 512 bits). These keys are used by the subsequent EAP-AKA' process. K_encr is used by the AT_ENCR_DATA attribute, and K_aut by the AT_MAC attribute. K_re is used later in this section. MSK and EMSK are outputs from a successful EAP method run . IK' and CK' are derived as specified in . The functions that derive IK' and CK' take the following parameters: CK and IK produced by the AKA algorithm, and value of the Network Name field comes from the AT_KDF_INPUT attribute (without length or padding). The value "EAP-AKA'" is an eight-characters-long ASCII string. It is used as is, without any trailing NUL characters. Identity is the peer identity as specified in and in of in this document for the 5G cases. When the server creates an AKA challenge and corresponding AUTN, CK, CK', IK, and IK' values, it MUST set the Authentication Management Field (AMF) separation bit to 1 in the AKA algorithm . Similarly, the peer MUST check that the AMF separation bit is set to 1. If the bit is not set to 1, the peer behaves as if the AUTN had been incorrect and fails the authentication. On fast re-authentication, the following keys are calculated: MK = PRF'(K_re,"EAP-AKA' re-auth"|Identity|counter|NONCE_S) MSK = MK[0..511] EMSK = MK[512..1023] MSK and EMSK are the resulting 512-bit keys, taking the first 1024 bits from the result of PRF'. Note that K_encr and K_aut are not re-derived on fast re-authentication. K_re is the re-authentication key from the preceding full authentication and stays unchanged over any fast re-authentication(s) that may happen based on it. The value "EAP-AKA' re-auth" is a sixteen-characters-long ASCII string, again represented without any trailing NUL characters. Identity is the fast re-authentication identity, counter is the value from the AT_COUNTER attribute, NONCE_S is the nonce value from the AT_NONCE_S attribute, all as specified in . To prevent the use of compromised keys in other places, it is forbidden to change the network name when going from the full to the fast re-authentication process. The peer SHOULD NOT attempt fast re-authentication when it knows that the network name in the current access network is different from the one in the initial, full authentication. Upon seeing a re-authentication request with a changed network name, the server SHOULD behave as if the re-authentication identifier had been unrecognized, and fall back to full authentication. The server observes the change in the name by comparing where the fast re-authentication and full authentication EAP transactions were received at the Authentication, Authorization, and Accounting (AAA) protocol level.

AT_KDF has any other value

Future variations of key derivation functions may be defined, and they will be represented by new values of AT_KDF. If the peer does not recognize the value, it cannot calculate the keys and behaves as explained in .

AT_KDF is missing

The peer behaves as if the AUTN had been incorrect and MUST fail the authentication.

If the peer supports a given key derivation function but is unwilling to perform it for policy reasons, it refuses to calculate the keys and behaves as explained in .

Hash Functions EAP-AKA' uses SHA-256 / HMAC-SHA-256, not SHA-1 / HMAC-SHA-1 (see and ) as in EAP-AKA. This requires a change to the pseudorandom function (PRF) as well as the AT_MAC and AT_CHECKCODE attributes.

PRF' The PRF' construction is the same one IKEv2 uses (see ; the definition of this function has not changed since , which was referenced by ). The function takes two arguments. K is a 256-bit value and S is a byte string of arbitrary length. PRF' is defined as follows: PRF'(K,S) = T1 | T2 | T3 | T4 | ... where: T1 = HMAC-SHA-256 (K, S | 0x01) T2 = HMAC-SHA-256 (K, T1 | S | 0x02) T3 = HMAC-SHA-256 (K, T2 | S | 0x03) T4 = HMAC-SHA-256 (K, T3 | S | 0x04) ... PRF' produces as many bits of output as is needed. HMAC-SHA-256 is the application of HMAC to SHA-256.

AT_MAC When used within EAP-AKA', the AT_MAC attribute is changed as follows. The MAC algorithm is HMAC-SHA-256-128, a keyed hash value. The HMAC-SHA-256-128 value is obtained from the 32-byte HMAC-SHA-256 value by truncating the output to the first 16 bytes. Hence, the length of the MAC is 16 bytes. Otherwise, the use of AT_MAC in EAP-AKA' follows .

AT_CHECKCODE When used within EAP-AKA', the AT_CHECKCODE attribute is changed as follows. First, a 32-byte value is needed to accommodate a 256-bit hash output: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | AT_CHECKCODE | Length | Reserved | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | | Checkcode (0 or 32 bytes) | | | | | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Second, the checkcode is a hash value, calculated with SHA-256 , over the data specified in .

Summary of Attributes for EAP-AKA' identifies which attributes may be found in which kinds of messages, and in what quantity. Messages are denoted with numbers as follows:

1

EAP-Request/AKA-Identity

2

EAP-Response/AKA-Identity

3

EAP-Request/AKA-Challenge

4

EAP-Response/AKA-Challenge

5

EAP-Request/AKA-Notification

6

EAP-Response/AKA-Notification

7

EAP-Response/AKA-Client-Error

8

EAP-Request/AKA-Reauthentication

9

EAP-Response/AKA-Reauthentication

10

EAP-Response/AKA-Authentication-Reject

11

EAP-Response/AKA-Synchronization-Failure

The column denoted with "E" indicates whether the attribute is a nested attribute that MUST be included within AT_ENCR_DATA. In addition, the numbered columns indicate the quantity of the attribute within the message as follows:

"0"

Indicates that the attribute MUST NOT be included in the message.

"1"

Indicates that the attribute MUST be included in the message.

"0-1"

Indicates that the attribute is sometimes included in the message

"0+"

Indicates that zero or more copies of the attribute MAY be included in the message.

"1+"

Indicates that there MUST be at least one attribute in the message but more than one MAY be included in the message.

"0*"

Indicates that the attribute is not included in the message in cases specified in this document, but MAY be included in the future versions of the protocol.

The attribute table is shown below. The table is largely the same as in the EAP-AKA attribute table (), but changes how many times AT_MAC may appear in an EAP-Response/AKA'-Challenge message as it does not appear there when AT_KDF has to be sent from the peer to the server. The table also adds the AT_KDF and AT_KDF_INPUT attributes. The Attribute Table

Attribute	1	2	3	4	5	6	7	8	9	10	11	E
AT_PERMANENT_ID_REQ	0-1	0	0	0	0	0	0	0	0	0	0	N
AT_ANY_ID_REQ	0-1	0	0	0	0	0	0	0	0	0	0	N
AT_FULLAUTH_ID_REQ	0-1	0	0	0	0	0	0	0	0	0	0	N
AT_IDENTITY	0	0-1	0	0	0	0	0	0	0	0	0	N
AT_RAND	0	0	1	0	0	0	0	0	0	0	0	N
AT_AUTN	0	0	1	0	0	0	0	0	0	0	0	N
AT_RES	0	0	0	1	0	0	0	0	0	0	0	N
AT_AUTS	0	0	0	0	0	0	0	0	0	0	1	N
AT_NEXT_PSEUDONYM	0	0	0-1	0	0	0	0	0	0	0	0	Y
AT_NEXT_REAUTH_ID	0	0	0-1	0	0	0	0	0-1	0	0	0	Y
AT_IV	0	0	0-1	0*	0-1	0-1	0	1	1	0	0	N
AT_ENCR_DATA	0	0	0-1	0*	0-1	0-1	0	1	1	0	0	N
AT_PADDING	0	0	0-1	0*	0-1	0-1	0	0-1	0-1	0	0	Y
AT_CHECKCODE	0	0	0-1	0-1	0	0	0	0-1	0-1	0	0	N
AT_RESULT_IND	0	0	0-1	0-1	0	0	0	0-1	0-1	0	0	N
AT_MAC	0	0	1	0-1	0-1	0-1	0	1	1	0	0	N
AT_COUNTER	0	0	0	0	0-1	0-1	0	1	1	0	0	Y
AT_COUNTER_TOO_SMALL	0	0	0	0	0	0	0	0	0-1	0	0	Y
AT_NONCE_S	0	0	0	0	0	0	0	1	0	0	0	Y
AT_NOTIFICATION	0	0	0	0	1	0	0	0	0	0	0	N
AT_CLIENT_ERROR_CODE	0	0	0	0	0	0	1	0	0	0	0	N
AT_KDF	0	0	1+	0+	0	0	0	0	0	0	1+	N
AT_KDF_INPUT	0	0	1	0	0	0	0	0	0	0	0	N

Bidding Down Prevention for EAP-AKA As discussed in , negotiation of methods within EAP is insecure. That is, a man-in-the-middle attacker may force the endpoints to use a method that is not the strongest that they both support. This is a problem, as we expect EAP-AKA and EAP-AKA' to be negotiated via EAP. In order to prevent such attacks, this RFC specifies a mechanism for EAP-AKA that allows the endpoints to securely discover the capabilities of each other. This mechanism comes in the form of the AT_BIDDING attribute. This allows both endpoints to communicate their desire and support for EAP-AKA' when exchanging EAP-AKA messages. This attribute is not included in EAP-AKA' messages. It is only included in EAP-AKA messages, which are protected with the AT_MAC attribute. This approach is based on the assumption that EAP-AKA' is always preferable (see ). If during the EAP-AKA authentication process it is discovered that both endpoints would have been able to use EAP-AKA', the authentication process SHOULD be aborted, as a bidding down attack may have happened. The format of the AT_BIDDING attribute is shown below. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | AT_BIDDING | Length |D| Reserved | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The fields are as follows:

AT_BIDDING

This is set to 136.

Length

The length of the attribute, calculated as defined in . For AT_BIDDING, the Length MUST be set to 1.

D

This bit is set to 1 if the sender supports EAP-AKA', is willing to use it, and prefers it over EAP-AKA. Otherwise, it should be set to zero.

Reserved

This field MUST be set to zero when sent and ignored on receipt.

The server sends this attribute in the EAP-Request/AKA-Challenge message. If the peer supports EAP-AKA', it compares the received value to its own capabilities. If it turns out that both the server and peer would have been able to use EAP-AKA' and preferred it over EAP-AKA, the peer behaves as if AUTN had been incorrect and fails the authentication (see Figure 3 of ). A peer not supporting EAP-AKA' will simply ignore this attribute. In all cases, the attribute is protected by the integrity mechanisms of EAP-AKA, so it cannot be removed by a man-in-the-middle attacker. Note that we assume () that EAP-AKA' is always stronger than EAP-AKA. As a result, this specification does not provide protection against bidding "down" attacks in the other direction, i.e., attackers forcing the endpoints to use EAP-AKA'.

Summary of Attributes for EAP-AKA The appearance of the AT_BIDDING attribute in EAP-AKA exchanges is shown below, using the notation from : AT_BIDDING Attribute Appearance

Attribute	1	2	3	4	5	6	7	8	9	10	11	E
AT_BIDDING	0	0	1	0	0	0	0	0	0	0	0	N

Peer Identities EAP-AKA' peer identities are as specified in , with the addition of some requirements specified in this section. EAP-AKA' includes optional identity privacy support that can be used to hide the cleartext permanent identity and thereby make the subscriber's EAP exchanges untraceable to eavesdroppers. EAP-AKA' can also use the privacy-friendly identifiers specified for 5G networks. The permanent identity is usually based on the IMSI. Exposing the IMSI is undesirable because, as a permanent identity, it is easily trackable. In addition, since IMSIs may be used in other contexts as well, there would be additional opportunities for such tracking. In EAP-AKA', identity privacy is based on temporary usernames or pseudonym usernames. These are similar to, but separate from, the Temporary Mobile Subscriber Identities (TMSI) that are used on cellular networks.

Username Types in EAP-AKA' Identities specifies that there are three types of usernames: permanent, pseudonym, and fast re-authentication usernames. This specification extends this definition as follows. There are four types of usernames:

1. Regular usernames. These are external names given to EAP-AKA' peers. The regular usernames are further subdivided into to categories:
   1. Permanent usernames, for instance, IMSI-based usernames.
   2. Privacy-friendly temporary usernames, for instance, 5G GUTI (5G Globally Unique Temporary Identifier) or 5G privacy identifiers (see ) such as SUCI (Subscription Concealed Identifier).
2. EAP-AKA' pseudonym usernames. For example, 2s7ah6n9q@example.com might be a valid pseudonym identity. In this example, 2s7ah6n9q is the pseudonym username.
3. EAP-AKA' fast re-authentication usernames. For example, 43953754@example.com might be a valid fast re-authentication identity and 43953754 the fast re-authentication username.

The permanent, privacy-friendly temporary, and pseudonym usernames are only used with full authentication, and fast re-authentication usernames only with fast re-authentication. Unlike permanent usernames and pseudonym usernames, privacy-friendly temporary usernames and fast re-authentication usernames are one-time identifiers, which are not reused across EAP exchanges.

Generating Pseudonyms and Fast Re-Authentication Identities This section provides some additional guidance to implementations for producing secure pseudonyms and fast re-authentication identities. It does not impact backwards compatibility because each server consumes only the identities that it generates itself. However, adherence to the guidance will provide better security. As specified by , pseudonym usernames and fast re-authentication identities are generated by the EAP server in an implementation-dependent manner. RFC 4187 provides some general requirements on how these identities are transported, how they map to the NAI syntax, how they are distinguished from each other, and so on. However, to enhance privacy, some additional requirements need to be applied. The pseudonym usernames and fast re-authentication identities MUST be generated in a cryptographically secure way so that it is computationally infeasible for an attacker to differentiate two identities belonging to the same user from two identities belonging to different users. This can be achieved, for instance, by using random or pseudorandom identifiers such as random byte strings or ciphertexts. See also for guidance on random number generation. Note that the pseudonym and fast re-authentication usernames also MUST NOT include substrings that can be used to relate the username to a particular entity or a particular permanent identity. For instance, the usernames cannot include any subscriber-identifying part of an IMSI or other permanent identifier. Similarly, no part of the username can be formed by a fixed mapping that stays the same across multiple different pseudonyms or fast re-authentication identities for the same subscriber. When the identifier used to identify a subscriber in an EAP-AKA' authentication exchange is a privacy-friendly identifier that is used only once, the EAP-AKA' peer MUST NOT use a pseudonym provided in that authentication exchange in subsequent exchanges more than once. To ensure that this does not happen, the EAP-AKA' server MAY decline to provide a pseudonym in such authentication exchanges. An important case where such privacy-friendly identifiers are used is in 5G networks (see ).

Identifier Usage in 5G In EAP-AKA', the peer identity may be communicated to the server in one of three ways:

• As a part of link-layer establishment procedures, externally to EAP.
• With the EAP-Response/Identity message in the beginning of the EAP exchange, but before the selection of EAP-AKA'.
• Transmitted from the peer to the server using EAP-AKA' messages instead of EAP-Response/Identity. In this case, the server includes an identity-requesting attribute (AT_ANY_ID_REQ, AT_FULLAUTH_ID_REQ, or AT_PERMANENT_ID_REQ) in the EAP-Request/AKA-Identity message, and the peer includes the AT_IDENTITY attribute, which contains the peer's identity, in the EAP-Response/AKA-Identity message.

The identity carried above may be a permanent identity, privacy-friendly identity, pseudonym identity, or fast re-authentication identity as defined in . 5G supports the concept of privacy identifiers, and it is important for interoperability that the right type of identifier is used. 5G defines the SUbscription Permanent Identifier (SUPI) and SUbscription Concealed Identifier (SUCI) . SUPI is globally unique and allocated to each subscriber. However, it is only used internally in the 5G network and is privacy sensitive. The SUCI is a privacy-preserving identifier containing the concealed SUPI, using public key cryptography to encrypt the SUPI. Given the choice between these two types of identifiers, EAP-AKA' ensures interoperability as follows:

• Where identifiers are used within EAP-AKA' (such as key derivation) determine the exact values of the identity to be used, to avoid ambiguity (see ).
• Where identifiers are carried within EAP-AKA' packets (such as in the AT_IDENTITY attribute) determine which identifiers should be filled in (see ).

In 5G, the normal mode of operation is that identifiers are only transmitted outside EAP. However, in a system involving terminals from many generations and several connectivity options via 5G and other mechanisms, implementations and the EAP-AKA' specification need to prepare for many different situations, including sometimes having to communicate identities within EAP. The following sections clarify which identifiers are used and how.

Key Derivation In EAP-AKA', the peer identity is used in the key derivation formula found in . The identity needs to be represented in exactly the correct format for the key derivation formula to produce correct results. If the AT_KDF_INPUT parameter contains the prefix "5G:", the AT_KDF parameter has the value 1, and this authentication is not a fast re-authentication, then the peer identity used in the key derivation MUST be as specified in Annex F.3 of and Clause 2.2 of . This is in contrast to , which uses the identity as communicated in EAP and represented as a NAI. Also, in contrast to , in 5G EAP-AKA' does not use the "0" nor the "6" prefix in front of the identifier. For an example of the format of the identity, see Clause 2.2 of . In all other cases, the following applies: The identity used in the key derivation formula MUST be exactly the one sent in the EAP-AKA' AT_IDENTITY attribute, if one was sent, regardless of the kind of identity that it may have been. If no AT_IDENTITY was sent, the identity MUST be exactly the one sent in the generic EAP Identity exchange, if one was made. If no identity was communicated inside EAP, then the identity is the one communicated outside EAP in link-layer messaging. In this case, the used identity MUST be the identity most recently communicated by the peer to the network, again regardless of what type of identity it may have been.

EAP Identity Response and EAP-AKA' AT_IDENTITY Attribute The EAP authentication option is only available in 5G when the new 5G core network is also in use. However, in other networks, an EAP-AKA' peer may be connecting to other types of networks and existing equipment. When the EAP server is in a 5G network, the 5G procedures for EAP-AKA' apply. specifies when the EAP server is in a 5G network. Note: Currently, the following conditions are specified: when the EAP peer uses the 5G Non-Access Stratum (NAS) protocol or when the EAP peer attaches to a network that advertises 5G connectivity without NAS . Possible future conditions may also be specified by 3GPP. When the 5G procedures for EAP-AKA' apply, EAP identity exchanges are generally not used as the identity is already made available on previous link-layer exchanges. In this situation, the EAP Identity Response and EAP-AKA' AT_IDENTITY attribute are handled as specified in Annex F.2 of . When used in EAP-AKA', the format of the SUCI MUST be as specified in , Section 28.7.3, with the semantics defined in , Section 2.2B. Also, in contrast to , in 5G EAP-AKA' does not use the "0" nor the "6" prefix in front of the identifier. For an example of an IMSI in NAI format, see , Section 28.7.3. Otherwise, the peer SHOULD employ an IMSI, SUPI, or NAI as it is configured to use.

Exported Parameters When not using fast re-authentication, the EAP-AKA' Session-Id is the concatenation of the EAP-AKA' Type value (0x32, one byte) with the contents of the RAND field from the AT_RAND attribute followed by the contents of the AUTN field in the AT_AUTN attribute: Session-Id = 0x32 || RAND || AUTN When using fast re-authentication, the EAP-AKA' Session-Id is the concatenation of the EAP-AKA' Type value (0x32) with the contents of the NONCE_S field from the AT_NONCE_S attribute followed by the contents of the MAC field from the AT_MAC attribute from the EAP-Request/AKA-Reauthentication: Session-Id = 0x32 || NONCE_S || MAC The Peer-Id is the contents of the Identity field from the AT_IDENTITY attribute, using only the Actual Identity Length bytes from the beginning. Note that the contents are used as they are transmitted, regardless of whether the transmitted identity was a permanent, pseudonym, or fast EAP re-authentication identity. If no AT_IDENTITY attribute was exchanged, the exported Peer-Id is the identity provided from the EAP Identity Response packet. If no EAP Identity Response was provided either, the exported Peer-Id is the null string (zero length). The Server-Id is the null string (zero length).

Security Considerations A summary of the security properties of EAP-AKA' follows. These properties are very similar to those in EAP-AKA. We assume that HMAC SHA-256 is at least as secure as HMAC SHA-1 (see also ). This is called the SHA-256 assumption in the remainder of this section. Under this assumption, EAP-AKA' is at least as secure as EAP-AKA. If the AT_KDF attribute has value 1, then the security properties of EAP-AKA' are as follows:

Protected ciphersuite negotiation

EAP-AKA' has no ciphersuite negotiation mechanisms. It does have a negotiation mechanism for selecting the key derivation functions. This mechanism is secure against bidding down attacks from EAP-AKA' to EAP-AKA. The negotiation mechanism allows changing the offered key derivation function, but the change is visible in the final EAP-Request/AKA'-Challenge message that the server sends to the peer. This message is authenticated via the AT_MAC attribute, and carries both the chosen alternative and the initially offered list. The peer refuses to accept a change it did not initiate. As a result, both parties are aware that a change is being made and what the original offer was. Per assumptions in , there is no protection against bidding down attacks from EAP-AKA to EAP-AKA' should EAP-AKA' somehow be considered less secure some day than EAP-AKA. Such protection was not provided in RFC 5448 implementations and consequently neither does this specification provide it. If such support is needed, it would have to be added as a separate new feature. In general, it is expected that the current negotiation capabilities in EAP-AKA' are sufficient for some types of extensions, including adding Perfect Forward Secrecy and perhaps others. However, some larger changes may require a new EAP method type, which is how EAP-AKA' itself happened. One example of such change would be the introduction of new algorithms.

Mutual authentication

Under the SHA-256 assumption, the properties of EAP-AKA' are at least as good as those of EAP-AKA in this respect. Refer to , for further details.

Integrity protection

Under the SHA-256 assumption, the properties of EAP-AKA' are at least as good (most likely better) as those of EAP-AKA in this respect. Refer to , for further details. The only difference is that a stronger hash algorithm and keyed MAC, SHA-256 / HMAC-SHA-256, is used instead of SHA-1 / HMAC-SHA-1.

Replay protection

Under the SHA-256 assumption, the properties of EAP-AKA' are at least as good as those of EAP-AKA in this respect. Refer to , for further details.

Confidentiality

The properties of EAP-AKA' are exactly the same as those of EAP-AKA in this respect. Refer to , for further details.

Key derivation

EAP-AKA' supports key derivation with an effective key strength against brute-force attacks equal to the minimum of the length of the derived keys and the length of the AKA base key, i.e., 128 bits or more. The key hierarchy is specified in . The Transient EAP Keys used to protect EAP-AKA packets (K_encr, K_aut, K_re), the MSK, and the EMSK are cryptographically separate. If we make the assumption that SHA-256 behaves as a pseudorandom function, an attacker is incapable of deriving any non-trivial information about any of these keys based on the other keys. An attacker also cannot calculate the pre-shared secret from IK, CK, IK', CK', K_encr, K_aut, K_re, MSK, or EMSK by any practically feasible means. EAP-AKA' adds an additional layer of key derivation functions within itself to protect against the use of compromised keys. This is discussed further in . EAP-AKA' uses a pseudorandom function modeled after the one used in IKEv2 together with SHA-256.

Key strength

See above.

Dictionary attack resistance

Under the SHA-256 assumption, the properties of EAP-AKA' are at least as good as those of EAP-AKA in this respect. Refer to , for further details.

Fast reconnect

Under the SHA-256 assumption, the properties of EAP-AKA' are at least as good as those of EAP-AKA in this respect. Refer to , for further details. Note that implementations MUST prevent performing a fast reconnect across method types.

Cryptographic binding

Note that this term refers to a very specific form of binding, something that is performed between two layers of authentication. It is not the same as the binding to a particular network name. The properties of EAP-AKA' are exactly the same as those of EAP-AKA in this respect, i.e., as it is not a tunnel method, this property is not applicable to it. Refer to , for further details.

Session independence

The properties of EAP-AKA' are exactly the same as those of EAP-AKA in this respect. Refer to , for further details.

Fragmentation

The properties of EAP-AKA' are exactly the same as those of EAP-AKA in this respect. Refer to , for further details.

Channel binding

EAP-AKA', like EAP-AKA, does not provide channel bindings as they're defined in and . New skippable attributes can be used to add channel binding support in the future, if required. However, including the Network Name field in the AKA' algorithms (which are also used for other purposes than EAP-AKA') provides a form of cryptographic separation between different network names, which resembles channel bindings. However, the network name does not typically identify the EAP (pass-through) authenticator. See for more discussion.

Privacy suggests that the privacy considerations of IETF protocols be documented. The confidentiality properties of EAP-AKA' itself have been discussed above under "Confidentiality". EAP-AKA' uses several different types of identifiers to identify the authenticating peer. It is strongly RECOMMENDED to use the privacy-friendly temporary or hidden identifiers, i.e., the 5G GUTI or SUCI, pseudonym usernames, and fast re-authentication usernames. The use of permanent identifiers such as the IMSI or SUPI may lead to an ability to track the peer and/or user associated with the peer. The use of permanent identifiers such as the IMSI or SUPI is strongly NOT RECOMMENDED. As discussed in , when authenticating to a 5G network, only the SUCI identifier is normally used. The use of EAP-AKA' pseudonyms in this situation is at best limited because the SUCI already provides a stronger mechanism. In fact, reusing the same pseudonym multiple times will result in a tracking opportunity for observers that see the pseudonym pass by. To avoid this, the peer and server need to follow the guidelines given in . When authenticating to a 5G network, per , both the EAP-AKA' peer and server need to employ the permanent identifier SUPI as an input to key derivation. However, this use of the SUPI is only internal. As such, the SUPI need not be communicated in EAP messages. Therefore, SUPI MUST NOT be communicated in EAP-AKA' when authenticating to a 5G network. While the use of SUCI in 5G networks generally provides identity privacy, this is not true if the null-scheme encryption is used to construct the SUCI (see , Annex C). The use of this scheme makes the use of SUCI equivalent to the use of SUPI or IMSI. The use of the null scheme is NOT RECOMMENDED where identity privacy is important. The use of fast re-authentication identities when authenticating to a 5G network does not have the same problems as the use of pseudonyms, as long as the 5G authentication server generates the fast re-authentication identifiers in a proper manner specified in . Outside 5G, the peer can freely choose between the use of permanent, pseudonym, or fast re-authentication identifiers:

• A peer that has not yet performed any EAP-AKA' exchanges does not typically have a pseudonym available. If the peer does not have a pseudonym available, then the privacy mechanism cannot be used, and the permanent identity will have to be sent in the clear. The terminal SHOULD store the pseudonym in nonvolatile memory so that it can be maintained across reboots. An active attacker that impersonates the network may use the AT_PERMANENT_ID_REQ attribute () to learn the subscriber's IMSI. However, as discussed in , the terminal can refuse to send the cleartext permanent identity if it believes that the network should be able to recognize the pseudonym.
• When pseudonyms and fast re-authentication identities are used, the peer relies on the properly created identifiers by the server. It is essential that an attacker cannot link a privacy-friendly identifier to the user in any way or determine that two identifiers belong to the same user as outlined in . The pseudonym usernames and fast re-authentication identities MUST NOT be used for other purposes (e.g., in other protocols).

If the peer and server cannot guarantee that SUCI can be used or that pseudonyms will be available, generated properly, and maintained reliably, and identity privacy is required, then additional protection from an external security mechanism such as tunneled EAP methods like Tunneled Transport Layer Security (TTLS) or Tunnel Extensible Authentication Protocol (TEAP) may be used. The benefits and the security considerations of using an external security mechanism with EAP-AKA are beyond the scope of this document. Finally, as with other EAP methods, even when privacy-friendly identifiers or EAP tunneling is used, typically the domain part of an identifier (e.g., the home operator) is visible to external parties.

Discovered Vulnerabilities There have been no published attacks that violate the primary secrecy or authentication properties defined for Authentication and Key Agreement (AKA) under the originally assumed trust model. The same is true of EAP-AKA'. However, there have been attacks when a different trust model is in use, with characteristics not originally provided by the design, or when participants in the protocol leak information to outsiders on purpose, and there have been some privacy-related attacks. For instance, the original AKA protocol does not prevent an insider supplying keys to a third party, e.g., as described by and Tsay in where a serving network lets an authentication run succeed, but then it misuses the session keys to send traffic on the authenticated user's behalf. This particular attack is not different from any on-path entity (such as a router) pretending to send traffic, but the general issue of insider attacks can be a problem, particularly in a large group of collaborating operators. Another class of attacks is the use of tunneling of traffic from one place to another, e.g., as done by Zhang and Fang in to leverage security policy differences between different operator networks, for instance. To gain something in such an attack, the attacker needs to trick the user into believing it is in another location. If policies between locations differ, for instance, if payload traffic is not required to be encrypted in some location, the attacker may trick the user into opening a vulnerability. As an authentication mechanism, EAP-AKA' is not directly affected by most of these attacks. EAP-AKA' network name binding can also help alleviate some of the attacks. In any case, it is recommended that EAP-AKA' configuration not be dependent on the location of request origin, unless the location information can be cryptographically confirmed, e.g., with the network name binding. Zhang and Fang also looked at denial-of-service attacks . A serving network may request large numbers of authentication runs for a particular subscriber from a home network. While the resynchronization process can help recover from this, eventually it is possible to exhaust the sequence number space and render the subscriber's card unusable. This attack is possible for both original AKA and EAP-AKA'. However, it requires the collaboration of a serving network in an attack. It is recommended that EAP-AKA' implementations provide the means to track, detect, and limit excessive authentication attempts to combat this problem. There have also been attacks related to the use of AKA without the generated session keys (e.g., ). Some of those attacks relate to the use of HTTP Digest AKAv1 , which was originally vulnerable to man-in-the-middle attacks. This has since been corrected in . The EAP-AKA' protocol uses session keys and provides channel binding, and as such, it is resistant to the above attacks except where the protocol participants leak information to outsiders. Basin, et al.  have performed formal analysis and concluded that the AKA protocol would have benefited from additional security requirements such as key confirmation. In the context of pervasive monitoring revelations, there were also reports of compromised long-term pre-shared keys used in SIM and AKA . While no protocol can survive the theft of key material associated with its credentials, there are some things that alleviate the impacts in such situations. These are discussed further in . Arapinis, et al.  describe an attack that uses the AKA resynchronization protocol to attempt to detect whether a particular subscriber is in a given area. This attack depends on the attacker setting up a false base station in the given area and on the subscriber performing at least one authentication between the time the attack is set up and run. Borgaonkar, et al. discovered that the AKA resynchronization protocol may also be used to predict the authentication frequency of a subscriber if a non-time-based sequence number (SQN) generation scheme is used . The attacker can force the reuse of the keystream that is used to protect the SQN in the AKA resynchronization protocol. The attacker then guesses the authentication frequency based on the lowest bits of two XORed SQNs. The researchers' concern was that the authentication frequency would reveal some information about the phone usage behavior, e.g., number of phone calls made or number of SMS messages sent. There are a number of possible triggers for authentication, so such an information leak is not direct, but it can be a concern. The impact of the attack differs depending on whether the SQN generation scheme that is used is time-based or not. Similar attacks are possible outside AKA in the cellular paging protocols where the attacker can simply send application-layer data, send short messages, or make phone calls to the intended victim and observe the air interface (e.g., and ). Hussain, et al. demonstrated a slightly more sophisticated version of the attack that exploits the fact that the 4G paging protocol uses the IMSI to calculate the paging timeslot . As this attack is outside AKA, it does not impact EAP-AKA'. Finally, bad implementations of EAP-AKA' may not produce pseudonym usernames or fast re-authentication identities in a manner that is sufficiently secure. While it is not a problem with the protocol itself, following the recommendations in can mitigate this concern.

Pervasive Monitoring As required by , work on IETF protocols needs to consider the effects of pervasive monitoring and mitigate them when possible. As described in , after the publication of RFC 5448, new information has come to light regarding the use of pervasive monitoring techniques against many security technologies, including AKA-based authentication. For AKA, these attacks relate to theft of the long-term, shared-secret key material stored on the cards. Such attacks are conceivable, for instance, during the manufacturing process of cards, through coercion of the card manufacturers, or during the transfer of cards and associated information to an operator. Since the publication of reports about such attacks, manufacturing and provisioning processes have gained much scrutiny and have improved. In particular, it is crucial that manufacturers limit access to the secret information and the cards only to necessary systems and personnel. It is also crucial that secure mechanisms be used to store and communicate the secrets between the manufacturer and the operator that adopts those cards for their customers. Beyond these operational considerations, there are also technical means to improve resistance to these attacks. One approach is to provide Perfect Forward Secrecy (PFS). This would prevent any passive attacks merely based on the long-term secrets and observation of traffic. Such a mechanism can be defined as a backwards-compatible extension of EAP-AKA' and is pursued separately from this specification . Alternatively, EAP-AKA' authentication can be run inside a PFS-capable, tunneled authentication method. In any case, the use of some PFS-capable mechanism is recommended.

Security Properties of Binding Network Names The ability of EAP-AKA' to bind the network name into the used keys provides some additional protection against key leakage to inappropriate parties. The keys used in the protocol are specific to a particular network name. If key leakage occurs due to an accident, access node compromise, or another attack, the leaked keys are only useful when providing access with that name. For instance, a malicious access point cannot claim to be network Y if it has stolen keys from network X. Obviously, if an access point is compromised, the malicious node can still represent the compromised node. As a result, neither EAP-AKA' nor any other extension can prevent such attacks; however, the binding to a particular name limits the attacker's choices, allows better tracking of attacks, makes it possible to identify compromised networks, and applies good cryptographic hygiene. The server receives the EAP transaction from a given access network, and verifies that the claim from the access network corresponds to the name that this access network should be using. It becomes impossible for an access network to claim over AAA that it is another access network. In addition, if the peer checks that the information it has received locally over the network-access link-layer matches with the information the server has given it via EAP-AKA', it becomes impossible for the access network to tell one story to the AAA network and another one to the peer. These checks prevent some "lying NAS" (Network Access Server) attacks. For instance, a roaming partner, R, might claim that it is the home network H in an effort to lure peers to connect to itself. Such an attack would be beneficial for the roaming partner if it can attract more users, and damaging for the users if their access costs in R are higher than those in other alternative networks, such as H. Any attacker who gets hold of the keys CK and IK, produced by the AKA algorithm, can compute the keys CK' and IK' and, hence, the Master Key (MK) according to the rules in . The attacker could then act as a lying NAS. In 3GPP systems in general, the keys CK and IK have been distributed to, for instance, nodes in a visited access network where they may be vulnerable. In order to reduce this risk, the AKA algorithm MUST be computed with the AMF separation bit set to 1, and the peer MUST check that this is indeed the case whenever it runs EAP-AKA'. Furthermore, requires that no CK or IK keys computed in this way ever leave the home subscriber system. The additional security benefits obtained from the binding depend obviously on the way names are assigned to different access networks. This is specified in . See also . Ideally, the names allow separating each different access technology, each different access network, and each different NAS within a domain. If this is not possible, the full benefits may not be achieved. For instance, if the names identify just an access technology, use of compromised keys in a different technology can be prevented, but it is not possible to prevent their use by other domains or devices using the same technology.

IANA Considerations IANA has updated the "Extensible Authentication Protocol (EAP) Registry" and the "EAP-AKA and EAP-SIM Parameters" registry so that entries that pointed to RFC 5448 now point to this RFC instead.

Type Value IANA has updated the reference for EAP-AKA' (0x32) in the "Method Types" subregistry under the "Extensible Authentication Protocol (EAP) Registry" to point to this document. Per , this allocation can be made with Specification Required .

Attribute Type Values EAP-AKA' shares its attribute space and subtypes with EAP-SIM and EAP-AKA . No new registries are needed. IANA has updated the reference for AT_KDF_INPUT (23) and AT_KDF (24) in the "Attribute Types (Non-Skippable Attributes 0-127)" subregistry under the "EAP-AKA and EAP-SIM Parameters" registry to point to this document. AT_KDF_INPUT and AT_KDF are defined in Sections and , respectively, of this document. IANA has also updated the reference for AT_BIDDING (136) in the "Attribute Types (Skippable Attributes 128-255)" subregistry of the "EAP-AKA and EAP-SIM Parameters" registry to point to this document. AT_BIDDING is defined in .

Key Derivation Function Namespace IANA has updated the reference for the "EAP-AKA' AT_KDF Key Derivation Function Values" subregistry to point to this document. This subregistry appears under the "EAP-AKA and EAP-SIM Parameters" registry. The references for following entries have also been updated to point to this document. New values can be created through the Specification Required policy . EAP-AKA' AT_KDF Key Derivation Function Values

Value	Description	Reference
0	Reserved	RFC 9048
1	EAP-AKA' with CK'/IK'	RFC 9048

References Normative References National Institute of Standards and Technology This document describes HMAC, a mechanism for message authentication using cryptographic hash functions. HMAC can be used with any iterative cryptographic hash function, e.g., MD5, SHA-1, in combination with a secret shared key. The cryptographic strength of HMAC depends on the properties of the underlying hash function. This memo provides information for the Internet community. This memo does not specify an Internet standard of any kind In many standards track documents several words are used to signify the requirements in the specification. These words are often capitalized. This document defines these words as they should be interpreted in IETF documents. This document specifies an Internet Best Current Practices for the Internet Community, and requests discussion and suggestions for improvements. This document defines the Extensible Authentication Protocol (EAP), an authentication framework which supports multiple authentication methods. EAP typically runs directly over data link layers such as Point-to-Point Protocol (PPP) or IEEE 802, without requiring IP. EAP provides its own support for duplicate elimination and retransmission, but is reliant on lower layer ordering guarantees. Fragmentation is not supported within EAP itself; however, individual EAP methods may support this. This document obsoletes RFC 2284. A summary of the changes between this document and RFC 2284 is available in Appendix A. [STANDARDS-TRACK] This document specifies an Extensible Authentication Protocol (EAP) mechanism for authentication and session key distribution that uses the Authentication and Key Agreement (AKA) mechanism. AKA is used in the 3rd generation mobile networks Universal Mobile Telecommunications System (UMTS) and CDMA2000. AKA is based on symmetric keys, and typically runs in a Subscriber Identity Module, which is a UMTS Subscriber Identity Module, USIM, or a (Removable) User Identity Module, (R)UIM, similar to a smart card. EAP-AKA includes optional identity privacy support, optional result indications, and an optional fast re-authentication procedure. This memo provides information for the Internet community. In order to provide inter-domain authentication services, it is necessary to have a standardized method that domains can use to identify each other's users. This document defines the syntax for the Network Access Identifier (NAI), the user identifier submitted by the client prior to accessing resources. This document is a revised version of RFC 4282. It addresses issues with international character sets and makes a number of other corrections to RFC 4282. Many protocols make use of points of extensibility that use constants to identify various protocol parameters. To ensure that the values in these fields do not have conflicting uses and to promote interoperability, their allocations are often coordinated by a central record keeper. For IETF protocols, that role is filled by the Internet Assigned Numbers Authority (IANA). To make assignments in a given registry prudently, guidance describing the conditions under which new values should be assigned, as well as when and how modifications to existing values can be made, is needed. This document defines a framework for the documentation of these guidelines by specification authors, in order to assure that the provided guidance for the IANA Considerations is clear and addresses the various issues that are likely in the operation of a registry. This is the third edition of this document; it obsoletes RFC 5226. RFC 2119 specifies common key words that may be used in protocol specifications. This document aims to reduce the ambiguity by clarifying that only UPPERCASE usage of the key words have the defined special meanings. 3GPP Version 16.7.0 3GPP Version 16.9.0 3GPP Version 16.4.0 3GPP Version 16.9.0 3GPP Version 16.0.0 3GPP Version 16.0.0 3GPP Version 16.7.1 Informative References in CCS '12: Proceedings of the 2012 ACM Conference on Computer and Communications Security, Raleigh, North Carolina, USA arXiv:1806.10360 in IACR Cryptology ePrint Archive in 7th USENIX Workshop on Offensive Technologies, WOOT '13 Ericsson Ericsson Ericsson Many different attacks have been reported as part of revelations associated with pervasive surveillance. Some of the reported attacks involved compromising smart cards, such as attacking SIM card manufacturers and operators in an effort to compromise shared secrets stored on these cards. Since the publication of those reports, manufacturing and provisioning processes have gained much scrutiny and have improved. However, the danger of resourceful attackers for these systems is still a concern. This specification is an optional extension to the EAP-AKA' authentication method which was defined in [I-D.ietf-emu-rfc5448bis]. The extension, when negotiated, provides Perfect Forward Secrecy for the session key generated as a part of the authentication run in EAP- AKA'. This prevents an attacker who has gained access to the long- term pre-shared secret in a SIM card from being able to decrypt any past communications. In addition, if the attacker stays merely a passive eavesdropper, the extension prevents attacks against future sessions. This forces attackers to use active attacks instead. Work in Progress National Institute of Standards and Technology National Institute of Standards and Technology in the proceedings of NDSS '19, held 24-27 February, 2019, San Diego, California in the proceedings of NDSS '12, held 5-8 February, 2012, San Diego, California in Computer Network Security, Proceedings of the 6th International Conference on Mathematical Methods, Models and Architectures for Computer Network Security, Lecture Notes in Computer Science, Vol. 7531, pp. 65-76 Security systems are built on strong cryptographic algorithms that foil pattern analysis attempts. However, the security of these systems is dependent on generating secret quantities for passwords, cryptographic keys, and similar quantities. The use of pseudo-random processes to generate secret quantities can result in pseudo-security. A sophisticated attacker may find it easier to reproduce the environment that produced the secret quantities and to search the resulting small set of possibilities than to locate the quantities in the whole of the potential number space. Choosing random quantities to foil a resourceful and motivated adversary is surprisingly difficult. This document points out many pitfalls in using poor entropy sources or traditional pseudo-random number generation techniques for generating such quantities. It recommends the use of truly random hardware techniques and shows that the existing hardware on many systems can be used for this purpose. It provides suggestions to ameliorate the problem when a hardware solution is not available, and it gives examples of how large such quantities need to be for some applications. This document specifies an Internet Best Current Practices for the Internet Community, and requests discussion and suggestions for improvements. HTTP Digest, as specified in RFC 2617, is known to be vulnerable to man-in-the-middle attacks if the client fails to authenticate the server in TLS, or if the same passwords are used for authentication in some other context without TLS. This is a general problem that exists not just with HTTP Digest, but also with other IETF protocols that use tunneled authentication. This document specifies version 2 of the HTTP Digest AKA algorithm (RFC 3310). This algorithm can be implemented in a way that it is resistant to the man-in-the-middle attack. This memo provides information for the Internet community. This document specifies an Extensible Authentication Protocol (EAP) mechanism for authentication and session key distribution using the Global System for Mobile Communications (GSM) Subscriber Identity Module (SIM). GSM is a second generation mobile network standard. The EAP-SIM mechanism specifies enhancements to GSM authentication and key agreement whereby multiple authentication triplets can be combined to create authentication responses and session keys of greater strength than the individual GSM triplets. The mechanism also includes network authentication, user anonymity support, result indications, and a fast re-authentication procedure. This memo provides information for the Internet community. The Extensible Authentication Protocol (EAP) is defined in RFC 3748. This document defines a mechanism that allows an access network to provide identity selection hints to an EAP peer -- the end of the link that responds to the authenticator. The purpose is to assist the EAP peer in selecting an appropriate Network Access Identifier (NAI). This is useful in situations where the peer does not receive a lower-layer indication of what network it is connecting to, or when there is no direct roaming relationship between the access network and the peer's home network. In the latter case, authentication is typically accomplished via a mediating network such as a roaming consortium or broker. The mechanism defined in this document is limited in its scalability. It is intended for access networks that have a small to moderate number of direct roaming partners. This memo provides information for the Internet community. This document describes version 2 of the Internet Key Exchange (IKE) protocol. IKE is a component of IPsec used for performing mutual authentication and establishing and maintaining security associations (SAs). This version of the IKE specification combines the contents of what were previously separate documents, including Internet Security Association and Key Management Protocol (ISAKMP, RFC 2408), IKE (RFC 2409), the Internet Domain of Interpretation (DOI, RFC 2407), Network Address Translation (NAT) Traversal, Legacy authentication, and remote address acquisition. Version 2 of IKE does not interoperate with version 1, but it has enough of the header format in common that both versions can unambiguously run over the same UDP port. [STANDARDS-TRACK] When multiple access networks are available, users may have difficulty in selecting which network to connect to and how to authenticate with that network. This document defines the network discovery and selection problem, dividing it into multiple sub- problems. Some constraints on potential solutions are outlined, and the limitations of several solutions (including existing ones) are discussed. This memo provides information for the Internet community. The Extensible Authentication Protocol (EAP), defined in RFC 3748, enables extensible network access authentication. This document specifies the EAP key hierarchy and provides a framework for the transport and usage of keying material and parameters generated by EAP authentication algorithms, known as "methods". It also provides a detailed system-level security analysis, describing the conditions under which the key management guidelines described in RFC 4962 can be satisfied. [STANDARDS-TRACK] EAP-TTLS is an EAP (Extensible Authentication Protocol) method that encapsulates a TLS (Transport Layer Security) session, consisting of a handshake phase and a data phase. During the handshake phase, the server is authenticated to the client (or client and server are mutually authenticated) using standard TLS procedures, and keying material is generated in order to create a cryptographically secure tunnel for information exchange in the subsequent data phase. During the data phase, the client is authenticated to the server (or client and server are mutually authenticated) using an arbitrary authentication mechanism encapsulated within the secure tunnel. The encapsulated authentication mechanism may itself be EAP, or it may be another authentication protocol such as PAP, CHAP, MS-CHAP, or MS-CHAP-V2. Thus, EAP-TTLS allows legacy password-based authentication protocols to be used against existing authentication databases, while protecting the security of these legacy protocols against eavesdropping, man-in-the-middle, and other attacks. The data phase may also be used for additional, arbitrary data exchange. This memo provides information for the Internet community. This specification defines a new EAP method, EAP-AKA', which is a small revision of the EAP-AKA (Extensible Authentication Protocol Method for 3rd Generation Authentication and Key Agreement) method. The change is a new key derivation function that binds the keys derived within the method to the name of the access network. The new key derivation mechanism has been defined in the 3rd Generation Partnership Project (3GPP). This specification allows its use in EAP in an interoperable manner. In addition, EAP-AKA' employs SHA-256 instead of SHA-1. This specification also updates RFC 4187, EAP-AKA, to prevent bidding down attacks from EAP-AKA'. This memo provides information for the Internet community. This document includes security considerations for the SHA-0 and SHA-1 message digest algorithm. This document is not an Internet Standards Track specification; it is published for informational purposes. This document offers guidance for developing privacy considerations for inclusion in protocol specifications. It aims to make designers, implementers, and users of Internet protocols aware of privacy-related design choices. It suggests that whether any individual RFC warrants a specific privacy considerations section will depend on the document's content. This document defines the Tunnel Extensible Authentication Protocol (TEAP) version 1. TEAP is a tunnel-based EAP method that enables secure communication between a peer and a server by using the Transport Layer Security (TLS) protocol to establish a mutually authenticated tunnel. Within the tunnel, TLV objects are used to convey authentication-related data between the EAP peer and the EAP server. Pervasive monitoring is a technical attack that should be mitigated in the design of IETF protocols, where possible. This document describes version 2 of the Internet Key Exchange (IKE) protocol. IKE is a component of IPsec used for performing mutual authentication and establishing and maintaining Security Associations (SAs). This document obsoletes RFC 5996, and includes all of the errata for it. It advances IKEv2 to be an Internet Standard. in the proceedings of NDSS '16 held 21-24 February, 2016, San Diego, California 3GPP Version 16.0.0 IEEE Transactions on Wireless Communications, Vol. 4, No. 2

Changes from RFC 5448 The change from RFC 5448 was to refer to a newer version of . This RFC includes an updated definition of the Network Name field to include 5G. Identifier usage for 5G has been specified in . Also, the requirements for generating pseudonym usernames and fast re-authentication identities have been updated from the original definition in RFC 5448, which referenced RFC 4187. See . Exported parameters for EAP-AKA' have been defined in , as required by , including the definition of those parameters for both full authentication and fast re-authentication. The security, privacy, and pervasive monitoring considerations have been updated or added. See . The references to , , , and have been updated to their most recent versions, and language in this document has been changed accordingly. However, these are merely reference updates to newer specifications; the actual protocol functions are the same as defined in the earlier RFCs. Similarly, references to all 3GPP technical specifications have been updated to their 5G versions (Release 16) or otherwise most recent version when there has not been a 5G-related update. Finally, a number of clarifications have been made, including a summary of where attributes may appear.

Changes to RFC 4187 In addition to specifying EAP-AKA', this document also mandates a change to another EAP method -- EAP-AKA that was defined in RFC 4187. This change was already mandated in RFC 5448 but repeated here to ensure that the latest EAP-AKA' specification contains the instructions about the necessary bidding down prevention feature in EAP-AKA as well. The changes to RFC 4187 relate only to the bidding down prevention support defined in . In particular, this document does not change how the Master Key (MK) is calculated or any other aspect of EAP-AKA. The provisions in this specification for EAP-AKA' do not apply to EAP-AKA, outside of .

Importance of Explicit Negotiation Choosing between the traditional and revised AKA key derivation functions is easy when their use is unambiguously tied to a particular radio access network, e.g., Long Term Evolution (LTE) as defined by 3GPP or evolved High Rate Packet Data (eHRPD) as defined by 3GPP2. There is no possibility for interoperability problems if this radio access network is always used in conjunction with new protocols that cannot be mixed with the old ones; clients will always know whether they are connecting to the old or new system. However, using the new key derivation functions over EAP introduces several degrees of separation, making the choice of the correct key derivation functions much harder. Many different types of networks employ EAP. Most of these networks have no means to carry any information about what is expected from the authentication process. EAP itself is severely limited in carrying any additional information, as noted in and . Even if these networks or EAP were extended to carry additional information, it would not affect millions of deployed access networks and clients attaching to them. Simply changing the key derivation functions that EAP-AKA uses would cause interoperability problems with all of the existing implementations. Perhaps it would be possible to employ strict separation into domain names that should be used by the new clients and networks. Only these new devices would then employ the new key derivation function. While this can be made to work for specific cases, it would be an extremely brittle mechanism, ripe to result in problems whenever client configuration, routing of authentication requests, or server configuration does not match expectations. It also does not help to assume that the EAP client and server are running a particular release of 3GPP network specifications. Network vendors often provide features from future releases early or do not provide all features of the current release. And obviously, there are many EAP and even some EAP-AKA implementations that are not bundled with the 3GPP network offerings. In general, these approaches are expected to lead to hard-to-diagnose problems and increased support calls.

Test Vectors Test vectors are provided below for four different cases. The test vectors may be useful for testing implementations. In the first two cases, we employ the MILENAGE algorithm and the algorithm configuration parameters (the subscriber key K and operator algorithm variant configuration value OP) from test set 19 in . The last two cases use artificial values as the output of AKA, which are useful only for testing the computation of values within EAP-AKA', not AKA itself. Case 1 The parameters for the AKA run are as follows: Identity: "0555444333222111" Network name: "WLAN" RAND: 81e9 2b6c 0ee0 e12e bceb a8d9 2a99 dfa5 AUTN: bb52 e91c 747a c3ab 2a5c 23d1 5ee3 51d5 IK: 9744 871a d32b f9bb d1dd 5ce5 4e3e 2e5a CK: 5349 fbe0 9864 9f94 8f5d 2e97 3a81 c00f RES: 28d7 b0f2 a2ec 3de5 Then the derived keys are generated as follows: CK': 0093 962d 0dd8 4aa5 684b 045c 9edf fa04 IK': ccfc 230c a74f cc96 c0a5 d611 64f5 a76c K_encr: 766f a0a6 c317 174b 812d 52fb cd11 a179 K_aut: 0842 ea72 2ff6 835b fa20 3249 9fc3 ec23 c2f0 e388 b4f0 7543 ffc6 77f1 696d 71ea K_re: cf83 aa8b c7e0 aced 892a cc98 e76a 9b20 95b5 58c7 795c 7094 715c b339 3aa7 d17a MSK: 67c4 2d9a a56c 1b79 e295 e345 9fc3 d187 d42b e0bf 818d 3070 e362 c5e9 67a4 d544 e8ec fe19 358a b303 9aff 03b7 c930 588c 055b abee 58a0 2650 b067 ec4e 9347 c75a EMSK: f861 703c d775 590e 16c7 679e a387 4ada 8663 11de 2907 64d7 60cf 76df 647e a01c 313f 6992 4bdd 7650 ca9b ac14 1ea0 75c4 ef9e 8029 c0e2 90cd bad5 638b 63bc 23fb Case 2 The parameters for the AKA run are as follows: Identity: "0555444333222111" Network name: "HRPD" RAND: 81e9 2b6c 0ee0 e12e bceb a8d9 2a99 dfa5 AUTN: bb52 e91c 747a c3ab 2a5c 23d1 5ee3 51d5 IK: 9744 871a d32b f9bb d1dd 5ce5 4e3e 2e5a CK: 5349 fbe0 9864 9f94 8f5d 2e97 3a81 c00f RES: 28d7 b0f2 a2ec 3de5 Then the derived keys are generated as follows: CK': 3820 f027 7fa5 f777 32b1 fb1d 90c1 a0da IK': db94 a0ab 557e f6c9 ab48 619c a05b 9a9f K_encr: 05ad 73ac 915f ce89 ac77 e152 0d82 187b K_aut: 5b4a caef 62c6 ebb8 882b 2f3d 534c 4b35 2773 37a0 0184 f20f f25d 224c 04be 2afd K_re: 3f90 bf5c 6e5e f325 ff04 eb5e f653 9fa8 cca8 3981 94fb d00b e425 b3f4 0dba 10ac MSK: 87b3 2157 0117 cd6c 95ab 6c43 6fb5 073f f15c f855 05d2 bc5b b735 5fc2 1ea8 a757 57e8 f86a 2b13 8002 e057 5291 3bb4 3b82 f868 a961 17e9 1a2d 95f5 2667 7d57 2900 EMSK: c891 d5f2 0f14 8a10 0755 3e2d ea55 5c9c b672 e967 5f4a 66b4 bafa 0273 79f9 3aee 539a 5979 d0a0 042b 9d2a e28b ed3b 17a3 1dc8 ab75 072b 80bd 0c1d a612 466e 402c Case 3 The parameters for the AKA run are as follows: Identity: "0555444333222111" Network name: "WLAN" RAND: e0e0 e0e0 e0e0 e0e0 e0e0 e0e0 e0e0 e0e0 AUTN: a0a0 a0a0 a0a0 a0a0 a0a0 a0a0 a0a0 a0a0 IK: b0b0 b0b0 b0b0 b0b0 b0b0 b0b0 b0b0 b0b0 CK: c0c0 c0c0 c0c0 c0c0 c0c0 c0c0 c0c0 c0c0 RES: d0d0 d0d0 d0d0 d0d0 d0d0 d0d0 d0d0 d0d0 Then the derived keys are generated as follows: CK': cd4c 8e5c 68f5 7dd1 d7d7 dfd0 c538 e577 IK': 3ece 6b70 5dbb f7df c459 a112 80c6 5524 K_encr: 897d 302f a284 7416 488c 28e2 0dcb 7be4 K_aut: c407 00e7 7224 83ae 3dc7 139e b0b8 8bb5 58cb 3081 eccd 057f 9207 d128 6ee7 dd53 K_re: 0a59 1a22 dd8b 5b1c f29e 3d50 8c91 dbbd b4ae e230 5189 2c42 b6a2 de66 ea50 4473 MSK: 9f7d ca9e 37bb 2202 9ed9 86e7 cd09 d4a7 0d1a c76d 9553 5c5c ac40 a750 4699 bb89 61a2 9ef6 f3e9 0f18 3de5 861a d1be dc81 ce99 1639 1b40 1aa0 06c9 8785 a575 6df7 EMSK: 724d e00b db9e 5681 87be 3fe7 4611 4557 d501 8779 537e e37f 4d3c 6c73 8cb9 7b9d c651 bc19 bfad c344 ffe2 b52c a78b d831 6b51 dacc 5f2b 1440 cb95 1552 1cc7 ba23 Case 4 The parameters for the AKA run are as follows: Identity: "0555444333222111" Network name: "HRPD" RAND: e0e0 e0e0 e0e0 e0e0 e0e0 e0e0 e0e0 e0e0 AUTN: a0a0 a0a0 a0a0 a0a0 a0a0 a0a0 a0a0 a0a0 IK: b0b0 b0b0 b0b0 b0b0 b0b0 b0b0 b0b0 b0b0 CK: c0c0 c0c0 c0c0 c0c0 c0c0 c0c0 c0c0 c0c0 RES: d0d0 d0d0 d0d0 d0d0 d0d0 d0d0 d0d0 d0d0 Then the derived keys are generated as follows: CK': 8310 a71c e6f7 5488 9613 da8f 64d5 fb46 IK': 5adf 1436 0ae8 3819 2db2 3f6f cb7f 8c76 K_encr: 745e 7439 ba23 8f50 fcac 4d15 d47c d1d9 K_aut: 3e1d 2aa4 e677 025c fd86 2a4b e183 61a1 3a64 5765 5714 63df 833a 9759 e809 9879 K_re: 99da 835e 2ae8 2462 576f e651 6fad 1f80 2f0f a119 1655 dd0a 273d a96d 04e0 fcd3 MSK: c6d3 a6e0 ceea 951e b20d 74f3 2c30 61d0 680a 04b0 b086 ee87 00ac e3e0 b95f a026 83c2 87be ee44 4322 94ff 98af 26d2 cc78 3bac e75c 4b0a f7fd feb5 511b a8e4 cbd0 EMSK: 7fb5 6813 838a dafa 99d1 40c2 f198 f6da cebf b6af ee44 4961 1054 02b5 08c7 f363 352c b291 9644 b504 63e6 a693 5415 0147 ae09 cbc5 4b8a 651d 8787 a689 3ed8 536d

Acknowledgments The authors would like to thank , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , and for their in-depth reviews and interesting discussions in this problem space.

Contributors The test vectors in were provided by and , based on two independent implementations of this specification. provided suggested text for . provided much of the text for . Karl Norrman was the source of much of the information in .

Authors' Addresses Ericsson

Jorvas 02420 Finland jari.arkko@piuha.net

Ericsson

Jorvas 02420 Finland vesa.lehtovirta@ericsson.com

Ericsson

Jorvas 02420 Finland vesa.torvinen@ericsson.com

Independent

Finland pe@iki.fi