PowerDNS

Den Haag Netherlands peter.van.dijk@powerdns.com

CZ.NIC

Czech Republic libor.peltan@nic.cz

Internet Systems Consortium

Czech Republic ondrej@isc.org

NLnet Labs

Science Park 400 Amsterdam 1098 XH Netherlands willem@nlnetlabs.nl

Netherlands mind@monshouwer.eu

deSEC, SSE - Secure Systems Engineering

Berlin Germany peter@desec.io

Internet Systems Consortium

aram@isc.org

ops dnsop This document describes a method for automatic DNS zone provisioning among DNS primary and secondary name servers by storing and transferring the catalog of zones to be provisioned as one or more regular DNS zones.

Status of This Memo This is an Internet Standards Track document. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at .

Copyright Notice Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents () in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.

Table of Contents

• .  Introduction
• .  Terminology
• .  Description
• .  Catalog Zone Structure
  • .  Member Zones
  • .  Properties
    • .  Schema Version (version property)
  • .  Member Zone Properties
    • .  Change of Ownership (coo property)
    • .  Groups (group property)
  • .  Custom Properties (*.ext properties)
• .  Name Server Behavior
  • .  General Requirements
  • .  Member Zone Name Clash
  • .  Member Zone Removal
  • .  Member Node Name Change
  • .  Migrating Member Zones between Catalogs
  • .  Zone-Associated State Reset
• .  Implementation and Operational Notes
• .  Security Considerations
• .  IANA Considerations
• .  References
  • .  Normative References
  • .  Informative References
• .  Catalog Zone Example
• Acknowledgements
• Authors' Addresses

Introduction The content of a DNS zone is synchronized among its primary and secondary name servers using Authoritative Transfer (AXFR) and Incremental Zone Transfer (IXFR). However, the list of zones served by the primary (called a "catalog" in ) is not automatically synchronized with the secondaries. To add or remove a zone, the administrator of a DNS name server farm has to not only add or remove the zone from the primary but must also add or remove configuration for the zone from all secondaries. This can be both inconvenient and error-prone. In addition, the steps required are dependent on the name server implementation. This document describes a method in which the list of zones is represented as a regular DNS zone (called a "catalog zone" here) and transferred using DNS zone transfers. When entries are added to or removed from the catalog zone, it is distributed to the secondary name servers just like any other zone. Secondary name servers can then add, remove, or modify the zones they serve in accordance with the changes to the catalog zone. Other use cases of name server remote configuration by catalog zones are possible where the catalog consumer might not be a secondary.

Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 when, and only when, they appear in all capitals, as shown here.

Catalog zone:

A DNS zone containing a DNS catalog, which is a list of DNS zones and associated properties.

Member zone:

A DNS zone whose configuration is published inside a catalog zone.

Member node:

A DNS name in the catalog zone representing a member zone.

$CATZ:

Used in examples as a placeholder to represent the domain name of the catalog zone itself. $OLDCATZ and $NEWCATZ are used to discuss migration of a member zone from one catalog zone ($OLDCATZ) to another catalog zone ($NEWCATZ).

Catalog producer:

An entity that generates and is responsible for the contents of the catalog zone.

Catalog consumer:

An entity that extracts information from the catalog zone (such as a DNS server that configures itself according to the catalog zone's contents).

This document makes use of terminology for transfer mechanisms (AXFR and IXFR), record types (SOA, NS, and PTR), and other technical terms (such as RDATA) that are specific to the DNS. Since these terms have specific meanings in the DNS, they are not expanded upon first use in this document. For definitions of these and other terms, see .

Description A catalog zone is a DNS zone whose contents are specially crafted. Its resource records (RRs) primarily constitute a list of PTR records referencing other DNS zones (so-called "member zones"). The catalog zone may contain other records indicating additional metadata (so-called "properties") associated with these member zones. Catalog consumers MUST ignore any RRs in the catalog zone for which no processing is specified or which are otherwise not supported by the implementation. Authoritative servers may be pre-configured with multiple catalog zones, each associated with a different set of configurations. Although the contents of a catalog zone are interpreted and acted upon by name servers, a catalog zone is a regular DNS zone and must adhere to the standards for DNS zones. A catalog zone is primarily intended for the management of a farm of authoritative name servers and should not be expected to be accessible from any recursive name server.

Catalog Zone Structure A catalog zone MUST follow the usual rules for DNS zones. In particular, SOA and NS record sets MUST be present and adhere to standard requirements (such as ). Although catalog zones are not intended to be queried via recursive resolution (see ), at least one NS RR is still required so that a catalog zone is a syntactically correct DNS zone. A single NS RR with a NSDNAME field containing the absolute name "invalid." is RECOMMENDED .

Member Zones The list of member zones is specified as a collection of member nodes represented by domain names under the owner name "zones" where "zones" is a direct child domain of the catalog zone. The names of member zones are represented on the RDATA side of a PTR record (instead of being represented as a part of owner names) so that all valid domain names may be represented regardless of their length . This PTR record MUST be the only record in the PTR RRset with the same name. The presence of more than one record in the RRset indicates a broken catalog zone that MUST NOT be processed (see ). For example, if a catalog zone lists three zones ("example.com.", "example.net.", and "example.org."), the member node RRs would appear as follows: <unique-1>.zones.$CATZ 0 IN PTR example.com. <unique-2>.zones.$CATZ 0 IN PTR example.net. <unique-3>.zones.$CATZ 0 IN PTR example.org. where <unique-N> is a label that tags each record in the collection and has a unique value. When different <unique-N> labels hold the same PTR value (i.e., point to the same member zone), the catalog zone is broken and MUST NOT be processed (see ). Member node labels carry no informational meaning beyond labeling member zones. A changed label may indicate that the state for a zone needs to be reset (see ). Having the zones uniquely tagged with the <unique-N> label ensures that additional RRs can be added below the member node (see ). The CLASS field of every RR in a catalog zone MUST be IN (1). The TTL field's value has no meaning in this context and SHOULD be ignored.

Properties Catalog zone information is stored in the form of "properties". Properties are identified by their name, which is used as an owner name prefix for one or more record sets underneath a member node (or underneath the catalog zone apex), with RR type(s) as appropriate for the respective property. Known properties that have the correct RR type but are for some reason invalid (for example, because of an impossible value or because of an illegal number of RRs in the RRset) denote a broken catalog zone, which MUST NOT be processed (see ). This document includes a set of initial properties that can be extended via the IANA registry defined and created in . Some properties are defined at the global level; others are scoped to apply only to a specific member zone. This document defines a mandatory global property in . The "zones" label from can also be seen as a global property and is listed as such in the IANA registry in . Member-specific properties are described in . Implementers may store additional information in the catalog zone with custom properties; see . The meaning of such custom properties is determined by the implementation in question.

Schema Version (version property) The catalog zone schema version is specified by an integer value embedded in a TXT RR named version.$CATZ. All catalog zones MUST have a TXT RRset named version.$CATZ with exactly one RR. Catalog consumers MUST NOT apply catalog zone processing to:

• zones without the version property
• zones with a version property with more than one RR in the RRset
• zones with a version property without an expected value in the version.$CATZ TXT RR
• zones with a version property with a schema version value that is not implemented by the consumer (e.g., version "1")

These conditions signify a broken catalog zone, which MUST NOT be processed (see ). For this memo, the value of the version.$CATZ TXT RR MUST be set to "2"; that is: version.$CATZ 0 IN TXT "2" Note that Version 1 was used in an earlier draft version of this memo and reflected the implementation first found in BIND 9.11.

Member Zone Properties Each member zone MAY have one or more additional properties that are described in this section. The member properties described in this document are all optional, and implementations MAY choose to implement all, some, or none of them. Member zone properties are represented by RRsets below the corresponding member node.

Change of Ownership (coo property) The coo property facilitates controlled migration of a member zone from one catalog to another. A Change Of Ownership is signaled by the coo property in the catalog zone currently "owning" the zone. The name of the new catalog is the value of a PTR record in the relevant coo property in the old catalog. For example, if member "example.com." migrates from catalog zone $OLDCATZ to catalog zone $NEWCATZ, this will appear in the $OLDCATZ catalog zone as follows: <unique-N>.zones.$OLDCATZ 0 IN PTR example.com. coo.<unique-N>.zones.$OLDCATZ 0 IN PTR $NEWCATZ The PTR RRset MUST consist of a single PTR record. The presence of more than one record in the RRset indicates a broken catalog zone, which MUST NOT be processed (see ). When a consumer of a catalog zone $OLDCATZ receives an update that adds or changes a coo property for a member zone in $OLDCATZ, it does not migrate the member zone immediately. The migration has to wait for an update of $NEWCATZ in which the member zone is present. Before the actual migration, the consumer MUST verify that the coo property pointing to $NEWCATZ is still present in $OLDCATZ. Unless the member node label (i.e., <unique-N>) for the member is the same in $NEWCATZ, all its associated state for a just migrated zone MUST be reset (see ). Note that the owner of $OLDCATZ allows for the zone-associated state to be taken over by the owner of $NEWCATZ by default. To prevent the takeover of the zone-associated state, the owner of $OLDCATZ must remove this state by updating the associated properties or by performing a zone state reset (see ) before or simultaneous with adding the coo property (see ). The old owner may remove the member zone containing the coo property from $OLDCATZ once it has been established that all its consumers have processed the Change of Ownership.

Groups (group property) With a group property, a consumer(s) can be signaled to treat some member zones within the catalog zone differently. The consumer MAY apply different configuration options when processing member zones, based on the value of the group property. A group property value is stored as the entire RDATA of a TXT record directly below the member node. The exact handling of the group property value is left to the consumer's implementation and configuration. The producer MAY assign a group property to all, some, or none of the member zones within a catalog zone. The producer MAY assign more than one group property to one member zone. This will make it possible to transfer group information for different consumer operators in a single catalog zone. Implementations MAY facilitate mapping of a specific group value to a specific configuration configurable on a per catalog zone basis to allow for producers that publish their catalog zone at multiple consumer operators. Consumer operators SHOULD namespace their group values to reduce the risk of having to resolve clashes. The consumer MUST ignore group values it does not understand. When a consumer encounters multiple group values for a single member zone, it MAY choose to process all, some, or none of them. This is left to the implementation.

Example group properties are represented by TXT RRs. The record content has no pre-defined meaning. Their interpretation is purely a matter of agreement between the producer and the consumer(s) of the catalog. For example, the "foo" group could be agreed to indicate that a zone not be signed with DNSSEC. Conversely, an agreement could define that group names starting with "operator-" indicate in which way a given DNS operator should set up certain aspects of the member zone's DNSSEC configuration. Assuming that the catalog producer and consumer(s) have established such agreements, consider the following catalog zone (snippet) that signals to a consumer(s) how to treat DNSSEC for the zones "example.net." and "example.com.": <unique-1>.zones.$CATZ 0 IN PTR example.com. group.<unique-1>.zones.$CATZ 0 IN TXT "foo" <unique-2>.zones.$CATZ 0 IN PTR example.net. group.<unique-2>.zones.$CATZ 0 IN TXT "operator-x-foo" group.<unique-2>.zones.$CATZ 0 IN TXT "operator-y" "bar" In this scenario, a consumer(s) shall, by agreement, not sign the member zone "example.com." with DNSSEC. For "example.net.", the consumers, at two different operators, will configure the member zone to be signed with a specific combination of settings. The group value designated to indicate this combination of settings is prearranged with each operator ("operator-x-foo" vs. "operator-y" "bar").

Custom Properties (*.ext properties) Implementations and operators of catalog zones may choose to provide their own properties. Custom properties can occur globally or for a specific member zone. To prevent a name clash with future properties, such properties MUST be represented below the label "ext". "ext" is not a placeholder. A custom property is named as follows: ; a global custom property: <property-prefix>.ext.$CATZ ; a member zone custom property: <property-prefix>.ext.<unique-N>.zones.$CATZ <property-prefix> may consist of one or more labels. Implementations SHOULD namespace their custom properties to limit risk of clashes with other implementations of catalog zones. This can be achieved by using two labels as the <property-prefix> so that the name of the implementation is included in the prefix: <some-setting>.<implementation-name>.ext.$CATZ. Implementations MAY use such properties on the member zone level to store additional information about member zones (e.g., to flag them for specific treatment). Further, implementations MAY use custom properties on the global level to store additional information about the catalog zone itself. While there may be many use cases for this, a plausible one is to store default values for custom properties on the global level, then override them using a property of the same name on the member level (= under the ext label of the member node) if so desired. A property agreement between producer and consumer should clearly define what semantics apply and whether a property is global, member, or both. The meaning of the custom properties described in this section is determined by the implementation alone without expectation of interoperability.

Name Server Behavior

General Requirements As it is a regular DNS zone, a catalog zone can be transferred using DNS zone transfers among name servers. Catalog updates should be automatic; i.e., when a name server that supports catalog zones completes a zone transfer for a catalog zone, it SHOULD apply changes to the catalog within the running name server automatically without any manual intervention. Name servers MAY allow loading and transfer of broken zones with incorrect catalog zone syntax (as they are treated as regular zones). The reason a catalog zone is considered broken SHOULD be communicated clearly to the operator (e.g., through a log message). When a previously correct catalog zone becomes a broken catalog zone, it loses its catalog meaning because of an update through an incremental transfer or otherwise. No special processing occurs. Member zones previously configured by this catalog MUST NOT be removed or reconfigured in any way. If a name server restarts with a broken catalog zone, the broken catalog SHOULD NOT prevent the name server from starting up and serving the member zones in the last valid version of the catalog zone. Processing of a broken catalog SHALL start (or resume) when the catalog turns into a correct catalog zone, e.g., by an additional update (through zone transfer or updates) fixing the catalog zone. Similarly, when a catalog zone expires, it loses its catalog meaning and MUST no longer be processed as such. No special processing occurs until the zone becomes fresh again.

Member Zone Name Clash If there is a clash between an existing zone's name (from either an existing member zone or an otherwise configured zone) and an incoming member zone's name (via transfer or update), the new instance of the zone MUST be ignored and an error SHOULD be logged. A clash between an existing member zone's name and an incoming member zone's name (via transfer or update) may be an attempt to migrate a zone to a different catalog, but it should not be treated as one except as described in .

Member Zone Removal When a member zone is removed from a specific catalog zone, a consumer MUST NOT remove the zone and associated state data if the zone was not configured from that specific catalog zone. The zone and associated state (such as zone data and DNSSEC keys) MUST be removed from the consumer when and only when the zone was configured initially from the same catalog. Consumer operators may consider temporarily archiving associated state to facilitate mistake recovery.

Member Node Name Change When the member node's label value (<unique-N>) changes via a single update or transfer, catalog consumers MUST process this as a member zone removal, including the removal of all the zone's associated state (as described in ), and then immediately process the member as a newly added zone to be configured in the same catalog.

Migrating Member Zones between Catalogs If all consumers of the catalog zones involved support the coo property, it is RECOMMENDED to perform migration of a member zone by following the procedure described in . Otherwise, the migration of a member zone from a catalog zone $OLDCATZ to a catalog zone $NEWCATZ has to be done by first removing the member zone from $OLDCATZ and then adding the member zone to $NEWCATZ. If in the process of a migration some consumers of the involved catalog zones did not catch the removal of the member zone from $OLDCATZ yet (because of a lost packet or downtime or otherwise) but already saw the update of $NEWCATZ containing the addition of that member zone, they may consider this update to be a name clash (see ) and, as a consequence, the member is not migrated to $NEWCATZ. This possibility needs to be anticipated with a member zone migration. Recovery from such a situation is out of the scope of this document. For example, it may entail a manually forced retransfer of $NEWCATZ to consumers after they have been detected to have received and processed the removal of the member zone from $OLDCATZ.

Zone-Associated State Reset It may be desirable to reset state (such as zone data and DNSSEC keys) associated with a member zone. A zone state reset may be performed by a change of the member node's name (see ).

Implementation and Operational Notes Although any valid domain name can be used for the catalog name $CATZ, a catalog producer MUST NOT use names that are not under the control of the catalog producer (with the exception of reserved names). It is RECOMMENDED to use either a domain name owned by the catalog producer or a domain name under a suitable name such as "invalid." . Catalog zones on secondary name servers would have to be set up manually, perhaps as static configuration, similar to how ordinary DNS zones are configured when catalog zones or another automatic configuration mechanism are not in place. Additionally, the secondary needs to be configured as a catalog consumer for the catalog zone to enable processing of the member zones in the catalog, such as automatic synchronization of the member zones for secondary service. Operators of catalog consumers should note that secondary name servers may receive DNS NOTIFY messages for zones before they are seen as newly added member zones to the catalog from which that secondary is provisioned. Although they are regular DNS zones, catalog zones only contain information for the management of a set of authoritative name servers. To prevent unintended exposure to other parties, operators SHOULD limit the systems able to query these zones. Querying/serving catalog zone contents may be inconvenient via DNS due to the nature of their representation. Therefore, an administrator may want to use a different method for looking at data inside the catalog zone. Typical queries might include dumping the list of member zones, dumping a member zone's effective configuration, querying a specific property value of a member zone, etc. Because of the structure of catalog zones, it may not be possible to perform these queries intuitively, or in some cases at all, using DNS QUERY. For example, it is not possible to enumerate the contents of a multivalued property (such as the list of member zones) with a single QUERY. Implementations are therefore advised to provide a tool that uses either the output of AXFR or an out-of-band method to perform queries on catalog zones. Great power comes with great responsibility. Catalog zones simplify zone provisioning by orchestrating zones on secondary name servers from a single data source: the catalog. Hence, the catalog producer has great power and changes must be treated carefully. For example, if the catalog is generated by some script and this script generates an empty catalog, millions of member zones may get deleted from their secondaries within seconds, and all the affected domains may be offline in a blink of an eye.

Security Considerations As catalog zones are transmitted using DNS zone transfers, it is RECOMMENDED that catalog zone transfers be protected from unexpected modifications by way of authentication, e.g., by using a Transaction Signature (TSIG) or Strict or Mutual TLS authentication with DNS zone transfer over TLS or QUIC . Use of DNS UPDATE to modify the content of catalog zones SHOULD similarly be authenticated. Zone transfers of member zones SHOULD similarly be authenticated. TSIG shared secrets used for member zones SHOULD NOT be mentioned in the catalog zone data. However, key identifiers may be shared within catalog zones. Catalog zones reveal the zones served by their consumers, including their properties. To prevent unintentional exposure of catalog zone contents, it is RECOMMENDED to limit the systems able to query them and to conduct catalog zone transfers confidentially . As with regular zones, primary and secondary name servers for a catalog zone may be operated by different administrators. The secondary name servers may be configured as a catalog consumer to synchronize catalog zones from the primary, but the primary's administrators may not have any administrative access to the secondaries. Administrative control over what zones are served from the configured name servers shifts completely from the server operator (consumer) to the "owner" (producer) of the catalog zone content. To prevent unintended provisioning of zones, a consumer(s) SHOULD scope the set of admissible member zones by any means deemed suitable (such as statically via regular expressions, or dynamically by verifying against another database before accepting a member zone). With migration of member zones between catalogs using the coo property, it is possible for the owner of the target catalog (i.e., $NEWCATZ) to take over all its associated state with the zone from the original owner (i.e., $OLDCATZ) by maintaining the same member node label (i.e., <unique-N>). To prevent the takeover of the zone-associated state, the original owner has to enforce a zone state reset by changing the member node label (see ) before or simultaneously with adding the coo property.

IANA Considerations IANA has created the "DNS Catalog Zones Properties" registry under the "Domain Name System (DNS) Parameters" registry as follows:

Registry Name:

DNS Catalog Zones Properties

Assignment Policy:

Expert Review, except for property prefixes ending in the label "ext", which are for Private Use .

Reference:

RFC 9432

Note:

This registry applies to Catalog Zones schema version "2" as specified in RFC 9432.

DNS Catalog Zones Properties Registry

Property Prefix	Description	Status	Reference
zones	List of member zones	Standards Track	RFC 9432
version	Schema version	Standards Track	RFC 9432
coo	Change of Ownership	Standards Track	RFC 9432
group	Group	Standards Track	RFC 9432
*.ext	Custom properties	Private Use	RFC 9432

The meanings of the fields are as follows:

Property prefix:

One or more domain name labels.

Description:

A human-readable short description or name for the property.

Status:

IETF Stream RFC status or "External" if not documented in an IETF Stream RFC.

Reference:

A stable reference to the document in which this property is defined.

References Normative References This RFC is the revised specification of the protocol and format used in the implementation of the Domain Name System. It obsoletes RFC-883. This memo documents the details of the domain name client - server communication. The DNS has long relied upon serial number arithmetic, a concept which has never really been defined, certainly not in an IETF document, though which has been widely understood. This memo supplies the missing definition. It is intended to update RFC1034 and RFC1035. [STANDARDS-TRACK] This memo describes the NOTIFY opcode for DNS, by which a master server advises a set of slave servers that the master's data has been changed and that a query should be initiated to discover the new data. [STANDARDS-TRACK] In many standards track documents several words are used to signify the requirements in the specification. These words are often capitalized. This document defines these words as they should be interpreted in IETF documents. This document specifies an Internet Best Current Practices for the Internet Community, and requests discussion and suggestions for improvements. Using this specification of the UPDATE opcode, it is possible to add or delete RRs or RRsets from a specified zone. Prerequisites are specified separately from update operations, and can specify a dependency upon either the previous existence or nonexistence of an RRset, or the existence of a single RR. [STANDARDS-TRACK] To reduce the likelihood of conflict and confusion, a few top level domain names are reserved for use in private testing, as examples in documentation, and the like. In addition, a few second level domain names reserved for use as examples are documented. This document specifies an Internet Best Current Practices for the Internet Community, and requests discussion and suggestions for improvements. This document describes what it means to say that a Domain Name (DNS name) is reserved for special use, when reserving such a name is appropriate, and the procedure for doing so. It establishes an IANA registry for such domain names, and seeds it with entries for some of the already established special domain names. RFC 2119 specifies common key words that may be used in protocol specifications. This document aims to reduce the ambiguity by clarifying that only UPPERCASE usage of the key words have the defined special meanings. The Domain Name System (DNS) is defined in literally dozens of different RFCs. The terminology used by implementers and developers of DNS protocols, and by operators of DNS systems, has sometimes changed in the decades since the DNS was first defined. This document gives current definitions for many of the terms used in the DNS in a single document. This document obsoletes RFC 7719 and updates RFC 2308. This document describes a protocol for transaction-level authentication using shared secrets and one-way hashing. It can be used to authenticate dynamic updates to a DNS zone as coming from an approved client or to authenticate responses as coming from an approved name server. No recommendation is made here for distributing the shared secrets; it is expected that a network administrator will statically configure name servers and clients using some out-of-band mechanism. This document obsoletes RFCs 2845 and 4635. DNS zone transfers are transmitted in cleartext, which gives attackers the opportunity to collect the content of a zone by eavesdropping on network connections. The DNS Transaction Signature (TSIG) mechanism is specified to restrict direct zone transfer to authorized clients only, but it does not add confidentiality. This document specifies the use of TLS, rather than cleartext, to prevent zone content collection via passive monitoring of zone transfers: XFR over TLS (XoT). Additionally, this specification updates RFC 1995 and RFC 5936 with respect to efficient use of TCP connections and RFC 7766 with respect to the recommended number of connections between a client and server for each transport. Informative References Many protocols make use of points of extensibility that use constants to identify various protocol parameters. To ensure that the values in these fields do not have conflicting uses and to promote interoperability, their allocations are often coordinated by a central record keeper. For IETF protocols, that role is filled by the Internet Assigned Numbers Authority (IANA). To make assignments in a given registry prudently, guidance describing the conditions under which new values should be assigned, as well as when and how modifications to existing values can be made, is needed. This document defines a framework for the documentation of these guidelines by specification authors, in order to assure that the provided guidance for the IANA Considerations is clear and addresses the various issues that are likely in the operation of a registry. This is the third edition of this document; it obsoletes RFC 5226.

Catalog Zone Example The following is a full example of a catalog zone containing three member zones with various properties: catalog.invalid. 0 SOA invalid. ( invalid. 1625079950 3600 600 2147483646 0 ) catalog.invalid. 0 NS invalid. example.vendor.ext.catalog.invalid. 0 CNAME example.net. version.catalog.invalid. 0 TXT "2" nj2xg5b.zones.catalog.invalid. 0 PTR example.com. nvxxezj.zones.catalog.invalid. 0 PTR example.net. group.nvxxezj.zones.catalog.invalid. 0 TXT ( "operator-x-foo" ) nfwxa33.zones.catalog.invalid. 0 PTR example.org. coo.nfwxa33.zones.catalog.invalid. 0 PTR ( newcatz.invalid. ) group.nfwxa33.zones.catalog.invalid. 0 TXT ( "operator-y-bar" ) metrics.vendor.ext.nfwxa33.zones.catalog.invalid. 0 CNAME ( collector.example.net. )

Acknowledgements Our deepest thanks and appreciation go to , , and who initiated this document and did the bulk of the work. Catalog zones originated as the chosen method among various proposals that were evaluated at Internet Systems Consortium (ISC) for easy zone management. The chosen method of storing the catalog as a regular DNS zone was proposed by . The initial authors discovered that 's earlier proposal implemented a similar approach, and they reviewed it. Catalog zones borrow some syntax ideas from , as both share this scheme of representing the catalog as a regular DNS zone. Thanks to . Leo's presentation in the DNS devroom at FOSDEM'20 was one of the motivations to take up and continue the effort of standardizing catalog zones. Thanks to , , , , , , , , , , , , , , , , and for reviewing earlier draft versions and offering comments and suggestions.

Authors' Addresses PowerDNS

Den Haag Netherlands peter.van.dijk@powerdns.com

CZ.NIC

Czech Republic libor.peltan@nic.cz

Internet Systems Consortium

Czech Republic ondrej@isc.org

NLnet Labs

Science Park 400 Amsterdam 1098 XH Netherlands willem@nlnetlabs.nl

Netherlands mind@monshouwer.eu

deSEC, SSE - Secure Systems Engineering

Berlin Germany peter@desec.io

Internet Systems Consortium

aram@isc.org