An update for kernel is now available for openEuler-24.03-LTS Security Advisory openeuler-security@openeuler.org openEuler security committee openEuler-SA-2024-2124 Final 1.0 1.0 2024-09-14 Initial 2024-09-14 2024-09-14 openEuler SA Tool V1.0 2024-09-14 kernel security update An update for kernel is now available for openEuler-24.03-LTS The Linux Kernel, the operating system core itself. Security Fix(es): In the Linux kernel, the following vulnerability has been resolved: bna: ensure the copied buf is NUL terminated Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from userspace to that buffer. Later, we use sscanf on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using sscanf. Fix this issue by using memdup_user_nul instead of memdup_user.(CVE-2024-36934) In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential kernel bug due to lack of writeback flag waiting Destructive writes to a block device on which nilfs2 is mounted can cause a kernel bug in the folio/page writeback start routine or writeback end routine (__folio_start_writeback in the log below): kernel BUG at mm/page-writeback.c:3070! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI ... RIP: 0010:__folio_start_writeback+0xbaa/0x10e0 Code: 25 ff 0f 00 00 0f 84 18 01 00 00 e8 40 ca c6 ff e9 17 f6 ff ff e8 36 ca c6 ff 4c 89 f7 48 c7 c6 80 c0 12 84 e8 e7 b3 0f 00 90 <0f> 0b e8 1f ca c6 ff 4c 89 f7 48 c7 c6 a0 c6 12 84 e8 d0 b3 0f 00 ... Call Trace: <TASK> nilfs_segctor_do_construct+0x4654/0x69d0 [nilfs2] nilfs_segctor_construct+0x181/0x6b0 [nilfs2] nilfs_segctor_thread+0x548/0x11c0 [nilfs2] kthread+0x2f0/0x390 ret_from_fork+0x4b/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> This is because when the log writer starts a writeback for segment summary blocks or a super root block that use the backing device's page cache, it does not wait for the ongoing folio/page writeback, resulting in an inconsistent writeback state. Fix this issue by waiting for ongoing writebacks when putting folios/pages on the backing device into writeback state.(CVE-2024-37078) In the Linux kernel, the following vulnerability has been resolved: xfrm6: check ip6_dst_idev() return value in xfrm6_get_saddr() ip6_dst_idev() can return NULL, xfrm6_get_saddr() must act accordingly. syzbot reported: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 12 Comm: kworker/u8:1 Not tainted 6.10.0-rc2-syzkaller-00383-gb8481381d4e2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Workqueue: wg-kex-wg1 wg_packet_handshake_send_worker RIP: 0010:xfrm6_get_saddr+0x93/0x130 net/ipv6/xfrm6_policy.c:64 Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 97 00 00 00 4c 8b ab d8 00 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 86 00 00 00 4d 8b 6d 00 e8 ca 13 47 01 48 b8 00 RSP: 0018:ffffc90000117378 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff88807b079dc0 RCX: ffffffff89a0d6d7 RDX: 0000000000000000 RSI: ffffffff89a0d6e9 RDI: ffff88807b079e98 RBP: ffff88807ad73248 R08: 0000000000000007 R09: fffffffffffff000 R10: ffff88807b079dc0 R11: 0000000000000007 R12: ffffc90000117480 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4586d00440 CR3: 0000000079042000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> xfrm_get_saddr net/xfrm/xfrm_policy.c:2452 [inline] xfrm_tmpl_resolve_one net/xfrm/xfrm_policy.c:2481 [inline] xfrm_tmpl_resolve+0xa26/0xf10 net/xfrm/xfrm_policy.c:2541 xfrm_resolve_and_create_bundle+0x140/0x2570 net/xfrm/xfrm_policy.c:2835 xfrm_bundle_lookup net/xfrm/xfrm_policy.c:3070 [inline] xfrm_lookup_with_ifid+0x4d1/0x1e60 net/xfrm/xfrm_policy.c:3201 xfrm_lookup net/xfrm/xfrm_policy.c:3298 [inline] xfrm_lookup_route+0x3b/0x200 net/xfrm/xfrm_policy.c:3309 ip6_dst_lookup_flow+0x15c/0x1d0 net/ipv6/ip6_output.c:1256 send6+0x611/0xd20 drivers/net/wireguard/socket.c:139 wg_socket_send_skb_to_peer+0xf9/0x220 drivers/net/wireguard/socket.c:178 wg_socket_send_buffer_to_peer+0x12b/0x190 drivers/net/wireguard/socket.c:200 wg_packet_send_handshake_initiation+0x227/0x360 drivers/net/wireguard/send.c:40 wg_packet_handshake_send_worker+0x1c/0x30 drivers/net/wireguard/send.c:51 process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231 process_scheduled_works kernel/workqueue.c:3312 [inline] worker_thread+0x6c8/0xf70 kernel/workqueue.c:3393 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244(CVE-2024-40959) In the Linux kernel, the following vulnerability has been resolved: drm/lima: mask irqs in timeout path before hard reset There is a race condition in which a rendering job might take just long enough to trigger the drm sched job timeout handler but also still complete before the hard reset is done by the timeout handler. This runs into race conditions not expected by the timeout handler. In some very specific cases it currently may result in a refcount imbalance on lima_pm_idle, with a stack dump such as: [10136.669170] WARNING: CPU: 0 PID: 0 at drivers/gpu/drm/lima/lima_devfreq.c:205 lima_devfreq_record_idle+0xa0/0xb0 ... [10136.669459] pc : lima_devfreq_record_idle+0xa0/0xb0 ... [10136.669628] Call trace: [10136.669634] lima_devfreq_record_idle+0xa0/0xb0 [10136.669646] lima_sched_pipe_task_done+0x5c/0xb0 [10136.669656] lima_gp_irq_handler+0xa8/0x120 [10136.669666] __handle_irq_event_percpu+0x48/0x160 [10136.669679] handle_irq_event+0x4c/0xc0 We can prevent that race condition entirely by masking the irqs at the beginning of the timeout handler, at which point we give up on waiting for that job entirely. The irqs will be enabled again at the next hard reset which is already done as a recovery by the timeout handler.(CVE-2024-40976) In the Linux kernel, the following vulnerability has been resolved: scsi: qedi: Fix crash while reading debugfs attribute The qedi_dbg_do_not_recover_cmd_read() function invokes sprintf() directly on a __user pointer, which results into the crash. To fix this issue, use a small local stack buffer for sprintf() and then call simple_read_from_buffer(), which in turns make the copy_to_user() call. BUG: unable to handle page fault for address: 00007f4801111000 PGD 8000000864df6067 P4D 8000000864df6067 PUD 864df7067 PMD 846028067 PTE 0 Oops: 0002 [#1] PREEMPT SMP PTI Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/15/2023 RIP: 0010:memcpy_orig+0xcd/0x130 RSP: 0018:ffffb7a18c3ffc40 EFLAGS: 00010202 RAX: 00007f4801111000 RBX: 00007f4801111000 RCX: 000000000000000f RDX: 000000000000000f RSI: ffffffffc0bfd7a0 RDI: 00007f4801111000 RBP: ffffffffc0bfd7a0 R08: 725f746f6e5f6f64 R09: 3d7265766f636572 R10: ffffb7a18c3ffd08 R11: 0000000000000000 R12: 00007f4881110fff R13: 000000007fffffff R14: ffffb7a18c3ffca0 R15: ffffffffc0bfd7af FS: 00007f480118a740(0000) GS:ffff98e38af00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4801111000 CR3: 0000000864b8e001 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? page_fault_oops+0x183/0x510 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x22/0x30 ? memcpy_orig+0xcd/0x130 vsnprintf+0x102/0x4c0 sprintf+0x51/0x80 qedi_dbg_do_not_recover_cmd_read+0x2f/0x50 [qedi 6bcfdeeecdea037da47069eca2ba717c84a77324] full_proxy_read+0x50/0x80 vfs_read+0xa5/0x2e0 ? folio_add_new_anon_rmap+0x44/0xa0 ? set_pte_at+0x15/0x30 ? do_pte_missing+0x426/0x7f0 ksys_read+0xa5/0xe0 do_syscall_64+0x58/0x80 ? __count_memcg_events+0x46/0x90 ? count_memcg_event_mm+0x3d/0x60 ? handle_mm_fault+0x196/0x2f0 ? do_user_addr_fault+0x267/0x890 ? exc_page_fault+0x69/0x150 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f4800f20b4d(CVE-2024-40978) In the Linux kernel, the following vulnerability has been resolved: filelock: Remove locks reliably when fcntl/close race is detected When fcntl_setlk() races with close(), it removes the created lock with do_lock_file_wait(). However, LSMs can allow the first do_lock_file_wait() that created the lock while denying the second do_lock_file_wait() that tries to remove the lock. Separately, posix_lock_file() could also fail to remove a lock due to GFP_KERNEL allocation failure (when splitting a range in the middle). After the bug has been triggered, use-after-free reads will occur in lock_get_status() when userspace reads /proc/locks. This can likely be used to read arbitrary kernel memory, but can't corrupt kernel memory. Fix it by calling locks_remove_posix() instead, which is designed to reliably get rid of POSIX locks associated with the given file and files_struct and is also used by filp_flush().(CVE-2024-41012) In the Linux kernel, the following vulnerability has been resolved: ocfs2: strict bound check before memcmp in ocfs2_xattr_find_entry() xattr in ocfs2 maybe 'non-indexed', which saved with additional space requested. It's better to check if the memory is out of bound before memcmp, although this possibility mainly comes from crafted poisonous images.(CVE-2024-41016) In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda: fix null deref on system suspend entry When system enters suspend with an active stream, SOF core calls hw_params_upon_resume(). On Intel platforms with HDA DMA used to manage the link DMA, this leads to call chain of hda_dsp_set_hw_params_upon_resume() -> hda_dsp_dais_suspend() -> hda_dai_suspend() -> hda_ipc4_post_trigger() A bug is hit in hda_dai_suspend() as hda_link_dma_cleanup() is run first, which clears hext_stream->link_substream, and then hda_ipc4_post_trigger() is called with a NULL snd_pcm_substream pointer.(CVE-2024-41037) In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Init the count variable in collecting hot-reset devices The count variable is used without initialization, it results in mistakes in the device counting and crashes the userspace if the get hot reset info path is triggered.(CVE-2024-41052) In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Avoid address calculations via out of bounds array indexing req->n_channels must be set before req->channels[] can be used. This patch fixes one of the issues encountered in [1]. [ 83.964255] UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:364:4 [ 83.964258] index 0 is out of range for type 'struct ieee80211_channel *[]' [...] [ 83.964264] Call Trace: [ 83.964267] <TASK> [ 83.964269] dump_stack_lvl+0x3f/0xc0 [ 83.964274] __ubsan_handle_out_of_bounds+0xec/0x110 [ 83.964278] ieee80211_prep_hw_scan+0x2db/0x4b0 [ 83.964281] __ieee80211_start_scan+0x601/0x990 [ 83.964291] nl80211_trigger_scan+0x874/0x980 [ 83.964295] genl_family_rcv_msg_doit+0xe8/0x160 [ 83.964298] genl_rcv_msg+0x240/0x270 [...] [1] https://bugzilla.kernel.org/show_bug.cgi?id=218810(CVE-2024-41071) In the Linux kernel, the following vulnerability has been resolved: nvme-fabrics: use reserved tag for reg read/write command In some scenarios, if too many commands are issued by nvme command in the same time by user tasks, this may exhaust all tags of admin_q. If a reset (nvme reset or IO timeout) occurs before these commands finish, reconnect routine may fail to update nvme regs due to insufficient tags, which will cause kernel hang forever. In order to workaround this issue, maybe we can let reg_read32()/reg_read64()/reg_write32() use reserved tags. This maybe safe for nvmf: 1. For the disable ctrl path, we will not issue connect command 2. For the enable ctrl / fw activate path, since connect and reg_xx() are called serially. So the reserved tags may still be enough while reg_xx() use reserved tags.(CVE-2024-41082) In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Fix null pointer dereference on error If the ata_port_alloc() call in ata_host_alloc() fails, ata_host_release() will get called. However, the code in ata_host_release() tries to free ata_port struct members unconditionally, which can lead to the following: BUG: unable to handle page fault for address: 0000000000003990 PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 10 PID: 594 Comm: (udev-worker) Not tainted 6.10.0-rc5 #44 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:ata_host_release.cold+0x2f/0x6e [libata] Code: e4 4d 63 f4 44 89 e2 48 c7 c6 90 ad 32 c0 48 c7 c7 d0 70 33 c0 49 83 c6 0e 41 RSP: 0018:ffffc90000ebb968 EFLAGS: 00010246 RAX: 0000000000000041 RBX: ffff88810fb52e78 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88813b3218c0 RDI: ffff88813b3218c0 RBP: ffff88810fb52e40 R08: 0000000000000000 R09: 6c65725f74736f68 R10: ffffc90000ebb738 R11: 73692033203a746e R12: 0000000000000004 R13: 0000000000000000 R14: 0000000000000011 R15: 0000000000000006 FS: 00007f6cc55b9980(0000) GS:ffff88813b300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000003990 CR3: 00000001122a2000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? page_fault_oops+0x15a/0x2f0 ? exc_page_fault+0x7e/0x180 ? asm_exc_page_fault+0x26/0x30 ? ata_host_release.cold+0x2f/0x6e [libata] ? ata_host_release.cold+0x2f/0x6e [libata] release_nodes+0x35/0xb0 devres_release_group+0x113/0x140 ata_host_alloc+0xed/0x120 [libata] ata_host_alloc_pinfo+0x14/0xa0 [libata] ahci_init_one+0x6c9/0xd20 [ahci] Do not access ata_port struct members unconditionally.(CVE-2024-41098) In the Linux kernel, the following vulnerability has been resolved: ice: Fix improper extts handling Extts events are disabled and enabled by the application ts2phc. However, in case where the driver is removed when the application is running, a specific extts event remains enabled and can cause a kernel crash. As a side effect, when the driver is reloaded and application is started again, remaining extts event for the channel from a previous run will keep firing and the message "extts on unexpected channel" might be printed to the user. To avoid that, extts events shall be disabled when PTP is released.(CVE-2024-42139) In the Linux kernel, the following vulnerability has been resolved: nvmet: fix a possible leak when destroy a ctrl during qp establishment In nvmet_sq_destroy we capture sq->ctrl early and if it is non-NULL we know that a ctrl was allocated (in the admin connect request handler) and we need to release pending AERs, clear ctrl->sqs and sq->ctrl (for nvme-loop primarily), and drop the final reference on the ctrl. However, a small window is possible where nvmet_sq_destroy starts (as a result of the client giving up and disconnecting) concurrently with the nvme admin connect cmd (which may be in an early stage). But *before* kill_and_confirm of sq->ref (i.e. the admin connect managed to get an sq live reference). In this case, sq->ctrl was allocated however after it was captured in a local variable in nvmet_sq_destroy. This prevented the final reference drop on the ctrl. Solve this by re-capturing the sq->ctrl after all inflight request has completed, where for sure sq->ctrl reference is final, and move forward based on that. This issue was observed in an environment with many hosts connecting multiple ctrls simoutanuosly, creating a delay in allocating a ctrl leading up to this race window.(CVE-2024-42152) In the Linux kernel, the following vulnerability has been resolved: i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr When del_timer_sync() is called in an interrupt context it throws a warning because of potential deadlock. The timer is used only to exit from wait_for_completion() after a timeout so replacing the call with wait_for_completion_timeout() allows to remove the problematic timer and its related functions altogether.(CVE-2024-42153) In the Linux kernel, the following vulnerability has been resolved: mm: fix crashes from deferred split racing folio migration Even on 6.10-rc6, I've been seeing elusive "Bad page state"s (often on flags when freeing, yet the flags shown are not bad: PG_locked had been set and cleared??), and VM_BUG_ON_PAGE(page_ref_count(page) == 0)s from deferred_split_scan()'s folio_put(), and a variety of other BUG and WARN symptoms implying double free by deferred split and large folio migration. 6.7 commit 9bcef5973e31 ("mm: memcg: fix split queue list crash when large folio migration") was right to fix the memcg-dependent locking broken in 85ce2c517ade ("memcontrol: only transfer the memcg data for migration"), but missed a subtlety of deferred_split_scan(): it moves folios to its own local list to work on them without split_queue_lock, during which time folio->_deferred_list is not empty, but even the "right" lock does nothing to secure the folio and the list it is on. Fortunately, deferred_split_scan() is careful to use folio_try_get(): so folio_migrate_mapping() can avoid the race by folio_undo_large_rmappable() while the old folio's reference count is temporarily frozen to 0 - adding such a freeze in the !mapping case too (originally, folio lock and unmapping and no swap cache left an anon folio unreachable, so no freezing was needed there: but the deferred split queue offers a way to reach it).(CVE-2024-42234) In the Linux kernel, the following vulnerability has been resolved: s390/mm: Add NULL pointer check to crst_table_free() base_crst_free() crst_table_free() used to work with NULL pointers before the conversion to ptdescs. Since crst_table_free() can be called with a NULL pointer (error handling in crst_table_upgrade() add an explicit check. Also add the same check to base_crst_free() for consistency reasons. In real life this should not happen, since order two GFP_KERNEL allocations will not fail, unless FAIL_PAGE_ALLOC is enabled and used.(CVE-2024-42235) In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Validate payload length before processing block Move the payload length check in cs_dsp_load() and cs_dsp_coeff_load() to be done before the block is processed. The check that the length of a block payload does not exceed the number of remaining bytes in the firwmware file buffer was being done near the end of the loop iteration. However, some code before that check used the length field without validating it.(CVE-2024-42237) In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Return error if block header overflows file Return an error from cs_dsp_power_up() if a block header is longer than the amount of data left in the file. The previous code in cs_dsp_load() and cs_dsp_load_coeff() would loop while there was enough data left in the file for a valid region. This protected against overrunning the end of the file data, but it didn't abort the file processing with an error.(CVE-2024-42238) In the Linux kernel, the following vulnerability has been resolved: bpf: Fail bpf_timer_cancel when callback is being cancelled Given a schedule: timer1 cb timer2 cb bpf_timer_cancel(timer2); bpf_timer_cancel(timer1); Both bpf_timer_cancel calls would wait for the other callback to finish executing, introducing a lockup. Add an atomic_t count named 'cancelling' in bpf_hrtimer. This keeps track of all in-flight cancellation requests for a given BPF timer. Whenever cancelling a BPF timer, we must check if we have outstanding cancellation requests, and if so, we must fail the operation with an error (-EDEADLK) since cancellation is synchronous and waits for the callback to finish executing. This implies that we can enter a deadlock situation involving two or more timer callbacks executing in parallel and attempting to cancel one another. Note that we avoid incrementing the cancelling counter for the target timer (the one being cancelled) if bpf_timer_cancel is not invoked from a callback, to avoid spurious errors. The whole point of detecting cur->cancelling and returning -EDEADLK is to not enter a busy wait loop (which may or may not lead to a lockup). This does not apply in case the caller is in a non-callback context, the other side can continue to cancel as it sees fit without running into errors. Background on prior attempts: Earlier versions of this patch used a bool 'cancelling' bit and used the following pattern under timer->lock to publish cancellation status. lock(t->lock); t->cancelling = true; mb(); if (cur->cancelling) return -EDEADLK; unlock(t->lock); hrtimer_cancel(t->timer); t->cancelling = false; The store outside the critical section could overwrite a parallel requests t->cancelling assignment to true, to ensure the parallely executing callback observes its cancellation status. It would be necessary to clear this cancelling bit once hrtimer_cancel is done, but lack of serialization introduced races. Another option was explored where bpf_timer_start would clear the bit when (re)starting the timer under timer->lock. This would ensure serialized access to the cancelling bit, but may allow it to be cleared before in-flight hrtimer_cancel has finished executing, such that lockups can occur again. Thus, we choose an atomic counter to keep track of all outstanding cancellation requests and use it to prevent lockups in case callbacks attempt to cancel each other while executing in parallel.(CVE-2024-42239) In the Linux kernel, the following vulnerability has been resolved: x86/bhi: Avoid warning in #DB handler due to BHI mitigation When BHI mitigation is enabled, if SYSENTER is invoked with the TF flag set then entry_SYSENTER_compat() uses CLEAR_BRANCH_HISTORY and calls the clear_bhb_loop() before the TF flag is cleared. This causes the #DB handler (exc_debug_kernel()) to issue a warning because single-step is used outside the entry_SYSENTER_compat() function. To address this issue, entry_SYSENTER_compat() should use CLEAR_BRANCH_HISTORY after making sure the TF flag is cleared. The problem can be reproduced with the following sequence: $ cat sysenter_step.c int main() { asm("pushf; pop %ax; bts $8,%ax; push %ax; popf; sysenter"); } $ gcc -o sysenter_step sysenter_step.c $ ./sysenter_step Segmentation fault (core dumped) The program is expected to crash, and the #DB handler will issue a warning. Kernel log: WARNING: CPU: 27 PID: 7000 at arch/x86/kernel/traps.c:1009 exc_debug_kernel+0xd2/0x160 ... RIP: 0010:exc_debug_kernel+0xd2/0x160 ... Call Trace: <#DB> ? show_regs+0x68/0x80 ? __warn+0x8c/0x140 ? exc_debug_kernel+0xd2/0x160 ? report_bug+0x175/0x1a0 ? handle_bug+0x44/0x90 ? exc_invalid_op+0x1c/0x70 ? asm_exc_invalid_op+0x1f/0x30 ? exc_debug_kernel+0xd2/0x160 exc_debug+0x43/0x50 asm_exc_debug+0x1e/0x40 RIP: 0010:clear_bhb_loop+0x0/0xb0 ... </#DB> <TASK> ? entry_SYSENTER_compat_after_hwframe+0x6e/0x8d </TASK> [ bp: Massage commit message. ](CVE-2024-42240) In the Linux kernel, the following vulnerability has been resolved: mm/shmem: disable PMD-sized page cache if needed For shmem files, it's possible that PMD-sized page cache can't be supported by xarray. For example, 512MB page cache on ARM64 when the base page size is 64KB can't be supported by xarray. It leads to errors as the following messages indicate when this sort of xarray entry is split. WARNING: CPU: 34 PID: 7578 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: binfmt_misc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 \ nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject \ nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm fuse xfs \ libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce virtio_net \ net_failover virtio_console virtio_blk failover dimlib virtio_mmio CPU: 34 PID: 7578 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #9 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : xas_split_alloc+0xf8/0x128 lr : split_huge_page_to_list_to_order+0x1c4/0x720 sp : ffff8000882af5f0 x29: ffff8000882af5f0 x28: ffff8000882af650 x27: ffff8000882af768 x26: 0000000000000cc0 x25: 000000000000000d x24: ffff00010625b858 x23: ffff8000882af650 x22: ffffffdfc0900000 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffdfc0900000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000018000000000 x15: 52f8004000000000 x14: 0000e00000000000 x13: 0000000000002000 x12: 0000000000000020 x11: 52f8000000000000 x10: 52f8e1c0ffff6000 x9 : ffffbeb9619a681c x8 : 0000000000000003 x7 : 0000000000000000 x6 : ffff00010b02ddb0 x5 : ffffbeb96395e378 x4 : 0000000000000000 x3 : 0000000000000cc0 x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000 Call trace: xas_split_alloc+0xf8/0x128 split_huge_page_to_list_to_order+0x1c4/0x720 truncate_inode_partial_folio+0xdc/0x160 shmem_undo_range+0x2bc/0x6a8 shmem_fallocate+0x134/0x430 vfs_fallocate+0x124/0x2e8 ksys_fallocate+0x4c/0xa0 __arm64_sys_fallocate+0x24/0x38 invoke_syscall.constprop.0+0x7c/0xd8 do_el0_svc+0xb4/0xd0 el0_svc+0x44/0x1d8 el0t_64_sync_handler+0x134/0x150 el0t_64_sync+0x17c/0x180 Fix it by disabling PMD-sized page cache when HPAGE_PMD_ORDER is larger than MAX_PAGECACHE_ORDER. As Matthew Wilcox pointed, the page cache in a shmem file isn't represented by a multi-index entry and doesn't have this limitation when the xarry entry is split until commit 6b24ca4a1a8d ("mm: Use multi-index entries in the page cache").(CVE-2024-42241) In the Linux kernel, the following vulnerability has been resolved: mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray Patch series "mm/filemap: Limit page cache size to that supported by xarray", v2. Currently, xarray can't support arbitrary page cache size. More details can be found from the WARN_ON() statement in xas_split_alloc(). In our test whose code is attached below, we hit the WARN_ON() on ARM64 system where the base page size is 64KB and huge page size is 512MB. The issue was reported long time ago and some discussions on it can be found here [1]. [1] https://www.spinics.net/lists/linux-xfs/msg75404.html In order to fix the issue, we need to adjust MAX_PAGECACHE_ORDER to one supported by xarray and avoid PMD-sized page cache if needed. The code changes are suggested by David Hildenbrand. PATCH[1] adjusts MAX_PAGECACHE_ORDER to that supported by xarray PATCH[2-3] avoids PMD-sized page cache in the synchronous readahead path PATCH[4] avoids PMD-sized page cache for shmem files if needed Test program ============ # cat test.c #define _GNU_SOURCE #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <string.h> #include <fcntl.h> #include <errno.h> #include <sys/syscall.h> #include <sys/mman.h> #define TEST_XFS_FILENAME "/tmp/data" #define TEST_SHMEM_FILENAME "/dev/shm/data" #define TEST_MEM_SIZE 0x20000000 int main(int argc, char **argv) { const char *filename; int fd = 0; void *buf = (void *)-1, *p; int pgsize = getpagesize(); int ret; if (pgsize != 0x10000) { fprintf(stderr, "64KB base page size is required\n"); return -EPERM; } system("echo force > /sys/kernel/mm/transparent_hugepage/shmem_enabled"); system("rm -fr /tmp/data"); system("rm -fr /dev/shm/data"); system("echo 1 > /proc/sys/vm/drop_caches"); /* Open xfs or shmem file */ filename = TEST_XFS_FILENAME; if (argc > 1 && !strcmp(argv[1], "shmem")) filename = TEST_SHMEM_FILENAME; fd = open(filename, O_CREAT | O_RDWR | O_TRUNC); if (fd < 0) { fprintf(stderr, "Unable to open <%s>\n", filename); return -EIO; } /* Extend file size */ ret = ftruncate(fd, TEST_MEM_SIZE); if (ret) { fprintf(stderr, "Error %d to ftruncate()\n", ret); goto cleanup; } /* Create VMA */ buf = mmap(NULL, TEST_MEM_SIZE, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); if (buf == (void *)-1) { fprintf(stderr, "Unable to mmap <%s>\n", filename); goto cleanup; } fprintf(stdout, "mapped buffer at 0x%p\n", buf); ret = madvise(buf, TEST_MEM_SIZE, MADV_HUGEPAGE); if (ret) { fprintf(stderr, "Unable to madvise(MADV_HUGEPAGE)\n"); goto cleanup; } /* Populate VMA */ ret = madvise(buf, TEST_MEM_SIZE, MADV_POPULATE_WRITE); if (ret) { fprintf(stderr, "Error %d to madvise(MADV_POPULATE_WRITE)\n", ret); goto cleanup; } /* Punch the file to enforce xarray split */ ret = fallocate(fd, FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE, TEST_MEM_SIZE - pgsize, pgsize); if (ret) fprintf(stderr, "Error %d to fallocate()\n", ret); cleanup: if (buf != (void *)-1) munmap(buf, TEST_MEM_SIZE); if (fd > 0) close(fd); return 0; } # gcc test.c -o test # cat /proc/1/smaps | grep KernelPageSize | head -n 1 KernelPageSize: 64 kB # ./test shmem : ------------[ cut here ]------------ WARNING: CPU: 17 PID: 5253 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \ nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \ nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set nf_tables rfkill nfnetlink vfat fat virtio_balloon \ drm fuse xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 \ virtio_net sha1_ce net_failover failover virtio_console virtio_blk \ dimlib virtio_mmio CPU: 17 PID: 5253 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #12 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TC ---truncated---(CVE-2024-42243) In the Linux kernel, the following vulnerability has been resolved: tty: serial: ma35d1: Add a NULL check for of_node The pdev->dev.of_node can be NULL if the "serial" node is absent. Add a NULL check to return an error in such cases.(CVE-2024-42248) In the Linux kernel, the following vulnerability has been resolved: cachefiles: add missing lock protection when polling Add missing lock protection in poll routine when iterating xarray, otherwise: Even with RCU read lock held, only the slot of the radix tree is ensured to be pinned there, while the data structure (e.g. struct cachefiles_req) stored in the slot has no such guarantee. The poll routine will iterate the radix tree and dereference cachefiles_req accordingly. Thus RCU read lock is not adequate in this case and spinlock is needed here.(CVE-2024-42250) In the Linux kernel, the following vulnerability has been resolved: gpio: pca953x: fix pca953x_irq_bus_sync_unlock race Ensure that `i2c_lock' is held when setting interrupt latch and mask in pca953x_irq_bus_sync_unlock() in order to avoid races. The other (non-probe) call site pca953x_gpio_set_multiple() ensures the lock is held before calling pca953x_write_regs(). The problem occurred when a request raced against irq_bus_sync_unlock() approximately once per thousand reboots on an i.MX8MP based system. * Normal case 0-0022: write register AI|3a {03,02,00,00,01} Input latch P0 0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0 0-0022: write register AI|08 {ff,00,00,00,00} Output P3 0-0022: write register AI|12 {fc,00,00,00,00} Config P3 * Race case 0-0022: write register AI|08 {ff,00,00,00,00} Output P3 0-0022: write register AI|08 {03,02,00,00,01} *** Wrong register *** 0-0022: write register AI|12 {fc,00,00,00,00} Config P3 0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0(CVE-2024-42253) In the Linux kernel, the following vulnerability has been resolved: mm: huge_memory: use !CONFIG_64BIT to relax huge page alignment on 32 bit machines Yves-Alexis Perez reported commit 4ef9ad19e176 ("mm: huge_memory: don't force huge page alignment on 32 bit") didn't work for x86_32 [1]. It is because x86_32 uses CONFIG_X86_32 instead of CONFIG_32BIT. !CONFIG_64BIT should cover all 32 bit machines. [1] https://lore.kernel.org/linux-mm/CAHbLzkr1LwH3pcTgM+aGQ31ip2bKqiqEQ8=FQB+t2c3dhNKNHA@mail.gmail.com/(CVE-2024-42258) In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Fix Virtual Memory mapping boundaries calculation Calculating the size of the mapped area as the lesser value between the requested size and the actual size does not consider the partial mapping offset. This can cause page fault access. Fix the calculation of the starting and ending addresses, the total size is now deduced from the difference between the end and start addresses. Additionally, the calculations have been rewritten in a clearer and more understandable form. [Joonas: Add Requires: tag] Requires: 60a2066c5005 ("drm/i915/gem: Adjust vma offset for framebuffer mmap offset") (cherry picked from commit 97b6784753da06d9d40232328efc5c5367e53417)(CVE-2024-42259) In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix use after free in iucv_sock_close() iucv_sever_path() is called from process context and from bh context. iucv->path is used as indicator whether somebody else is taking care of severing the path (or it is already removed / never existed). This needs to be done with atomic compare and swap, otherwise there is a small window where iucv_sock_close() will try to work with a path that has already been severed and freed by iucv_callback_connrej() called by iucv_tasklet_fn(). Example: [452744.123844] Call Trace: [452744.123845] ([<0000001e87f03880>] 0x1e87f03880) [452744.123966] [<00000000d593001e>] iucv_path_sever+0x96/0x138 [452744.124330] [<000003ff801ddbca>] iucv_sever_path+0xc2/0xd0 [af_iucv] [452744.124336] [<000003ff801e01b6>] iucv_sock_close+0xa6/0x310 [af_iucv] [452744.124341] [<000003ff801e08cc>] iucv_sock_release+0x3c/0xd0 [af_iucv] [452744.124345] [<00000000d574794e>] __sock_release+0x5e/0xe8 [452744.124815] [<00000000d5747a0c>] sock_close+0x34/0x48 [452744.124820] [<00000000d5421642>] __fput+0xba/0x268 [452744.124826] [<00000000d51b382c>] task_work_run+0xbc/0xf0 [452744.124832] [<00000000d5145710>] do_notify_resume+0x88/0x90 [452744.124841] [<00000000d5978096>] system_call+0xe2/0x2c8 [452744.125319] Last Breaking-Event-Address: [452744.125321] [<00000000d5930018>] iucv_path_sever+0x90/0x138 [452744.125324] [452744.125325] Kernel panic - not syncing: Fatal exception in interrupt Note that bh_lock_sock() is not serializing the tasklet context against process context, because the check for sock_owned_by_user() and corresponding handling is missing. Ideas for a future clean-up patch: A) Correct usage of bh_lock_sock() in tasklet context, as described in Re-enqueue, if needed. This may require adding return values to the tasklet functions and thus changes to all users of iucv. B) Change iucv tasklet into worker and use only lock_sock() in af_iucv.(CVE-2024-42271) In the Linux kernel, the following vulnerability has been resolved: sched: act_ct: take care of padding in struct zones_ht_key Blamed commit increased lookup key size from 2 bytes to 16 bytes, because zones_ht_key got a struct net pointer. Make sure rhashtable_lookup() is not using the padding bytes which are not initialized. BUG: KMSAN: uninit-value in rht_ptr_rcu include/linux/rhashtable.h:376 [inline] BUG: KMSAN: uninit-value in __rhashtable_lookup include/linux/rhashtable.h:607 [inline] BUG: KMSAN: uninit-value in rhashtable_lookup include/linux/rhashtable.h:646 [inline] BUG: KMSAN: uninit-value in rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline] BUG: KMSAN: uninit-value in tcf_ct_flow_table_get+0x611/0x2260 net/sched/act_ct.c:329 rht_ptr_rcu include/linux/rhashtable.h:376 [inline] __rhashtable_lookup include/linux/rhashtable.h:607 [inline] rhashtable_lookup include/linux/rhashtable.h:646 [inline] rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline] tcf_ct_flow_table_get+0x611/0x2260 net/sched/act_ct.c:329 tcf_ct_init+0xa67/0x2890 net/sched/act_ct.c:1408 tcf_action_init_1+0x6cc/0xb30 net/sched/act_api.c:1425 tcf_action_init+0x458/0xf00 net/sched/act_api.c:1488 tcf_action_add net/sched/act_api.c:2061 [inline] tc_ctl_action+0x4be/0x19d0 net/sched/act_api.c:2118 rtnetlink_rcv_msg+0x12fc/0x1410 net/core/rtnetlink.c:6647 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2550 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6665 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2597 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2651 __sys_sendmsg net/socket.c:2680 [inline] __do_sys_sendmsg net/socket.c:2689 [inline] __se_sys_sendmsg net/socket.c:2687 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2687 x64_sys_call+0x2dd6/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable key created at: tcf_ct_flow_table_get+0x4a/0x2260 net/sched/act_ct.c:324 tcf_ct_init+0xa67/0x2890 net/sched/act_ct.c:1408(CVE-2024-42272) In the Linux kernel, the following vulnerability has been resolved: nvme-pci: add missing condition check for existence of mapped data nvme_map_data() is called when request has physical segments, hence the nvme_unmap_data() should have same condition to avoid dereference.(CVE-2024-42276) In the Linux kernel, the following vulnerability has been resolved: iommu: sprd: Avoid NULL deref in sprd_iommu_hw_en In sprd_iommu_cleanup() before calling function sprd_iommu_hw_en() dom->sdev is equal to NULL, which leads to null dereference. Found by Linux Verification Center (linuxtesting.org) with SVACE.(CVE-2024-42277) In the Linux kernel, the following vulnerability has been resolved: spi: microchip-core: ensure TX and RX FIFOs are empty at start of a transfer While transmitting with rx_len == 0, the RX FIFO is not going to be emptied in the interrupt handler. A subsequent transfer could then read crap from the previous transfer out of the RX FIFO into the start RX buffer. The core provides a register that will empty the RX and TX FIFOs, so do that before each transfer.(CVE-2024-42279) In the Linux kernel, the following vulnerability has been resolved: ice: Add a per-VF limit on number of FDIR filters While the iavf driver adds a s/w limit (128) on the number of FDIR filters that the VF can request, a malicious VF driver can request more than that and exhaust the resources for other VFs. Add a similar limit in ice.(CVE-2024-42291) In the Linux kernel, the following vulnerability has been resolved: block: fix deadlock between sd_remove & sd_release Our test report the following hung task: [ 2538.459400] INFO: task "kworker/0:0":7 blocked for more than 188 seconds. [ 2538.459427] Call trace: [ 2538.459430] __switch_to+0x174/0x338 [ 2538.459436] __schedule+0x628/0x9c4 [ 2538.459442] schedule+0x7c/0xe8 [ 2538.459447] schedule_preempt_disabled+0x24/0x40 [ 2538.459453] __mutex_lock+0x3ec/0xf04 [ 2538.459456] __mutex_lock_slowpath+0x14/0x24 [ 2538.459459] mutex_lock+0x30/0xd8 [ 2538.459462] del_gendisk+0xdc/0x350 [ 2538.459466] sd_remove+0x30/0x60 [ 2538.459470] device_release_driver_internal+0x1c4/0x2c4 [ 2538.459474] device_release_driver+0x18/0x28 [ 2538.459478] bus_remove_device+0x15c/0x174 [ 2538.459483] device_del+0x1d0/0x358 [ 2538.459488] __scsi_remove_device+0xa8/0x198 [ 2538.459493] scsi_forget_host+0x50/0x70 [ 2538.459497] scsi_remove_host+0x80/0x180 [ 2538.459502] usb_stor_disconnect+0x68/0xf4 [ 2538.459506] usb_unbind_interface+0xd4/0x280 [ 2538.459510] device_release_driver_internal+0x1c4/0x2c4 [ 2538.459514] device_release_driver+0x18/0x28 [ 2538.459518] bus_remove_device+0x15c/0x174 [ 2538.459523] device_del+0x1d0/0x358 [ 2538.459528] usb_disable_device+0x84/0x194 [ 2538.459532] usb_disconnect+0xec/0x300 [ 2538.459537] hub_event+0xb80/0x1870 [ 2538.459541] process_scheduled_works+0x248/0x4dc [ 2538.459545] worker_thread+0x244/0x334 [ 2538.459549] kthread+0x114/0x1bc [ 2538.461001] INFO: task "fsck.":15415 blocked for more than 188 seconds. [ 2538.461014] Call trace: [ 2538.461016] __switch_to+0x174/0x338 [ 2538.461021] __schedule+0x628/0x9c4 [ 2538.461025] schedule+0x7c/0xe8 [ 2538.461030] blk_queue_enter+0xc4/0x160 [ 2538.461034] blk_mq_alloc_request+0x120/0x1d4 [ 2538.461037] scsi_execute_cmd+0x7c/0x23c [ 2538.461040] ioctl_internal_command+0x5c/0x164 [ 2538.461046] scsi_set_medium_removal+0x5c/0xb0 [ 2538.461051] sd_release+0x50/0x94 [ 2538.461054] blkdev_put+0x190/0x28c [ 2538.461058] blkdev_release+0x28/0x40 [ 2538.461063] __fput+0xf8/0x2a8 [ 2538.461066] __fput_sync+0x28/0x5c [ 2538.461070] __arm64_sys_close+0x84/0xe8 [ 2538.461073] invoke_syscall+0x58/0x114 [ 2538.461078] el0_svc_common+0xac/0xe0 [ 2538.461082] do_el0_svc+0x1c/0x28 [ 2538.461087] el0_svc+0x38/0x68 [ 2538.461090] el0t_64_sync_handler+0x68/0xbc [ 2538.461093] el0t_64_sync+0x1a8/0x1ac T1: T2: sd_remove del_gendisk __blk_mark_disk_dead blk_freeze_queue_start ++q->mq_freeze_depth bdev_release mutex_lock(&disk->open_mutex) sd_release scsi_execute_cmd blk_queue_enter wait_event(!q->mq_freeze_depth) mutex_lock(&disk->open_mutex) SCSI does not set GD_OWNS_QUEUE, so QUEUE_FLAG_DYING is not set in this scenario. This is a classic ABBA deadlock. To fix the deadlock, make sure we don't try to acquire disk->open_mutex after freezing the queue.(CVE-2024-42294) In the Linux kernel, the following vulnerability has been resolved: f2fs: fix return value of f2fs_convert_inline_inode() If device is readonly, make f2fs_convert_inline_inode() return EROFS instead of zero, otherwise it may trigger panic during writeback of inline inode's dirty page as below: f2fs_write_single_data_page+0xbb6/0x1e90 fs/f2fs/data.c:2888 f2fs_write_cache_pages fs/f2fs/data.c:3187 [inline] __f2fs_write_data_pages fs/f2fs/data.c:3342 [inline] f2fs_write_data_pages+0x1efe/0x3a90 fs/f2fs/data.c:3369 do_writepages+0x359/0x870 mm/page-writeback.c:2634 filemap_fdatawrite_wbc+0x125/0x180 mm/filemap.c:397 __filemap_fdatawrite_range mm/filemap.c:430 [inline] file_write_and_wait_range+0x1aa/0x290 mm/filemap.c:788 f2fs_do_sync_file+0x68a/0x1ae0 fs/f2fs/file.c:276 generic_write_sync include/linux/fs.h:2806 [inline] f2fs_file_write_iter+0x7bd/0x24e0 fs/f2fs/file.c:4977 call_write_iter include/linux/fs.h:2114 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xa72/0xc90 fs/read_write.c:590 ksys_write+0x1a0/0x2c0 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f(CVE-2024-42296) In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl: fsl_qmc_audio: Check devm_kasprintf() returned value devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fix this lack and check the returned value.(CVE-2024-42298) In the Linux kernel, the following vulnerability has been resolved: media: imx-pxp: Fix ERR_PTR dereference in pxp_probe() devm_regmap_init_mmio() can fail, add a check and bail out in case of error.(CVE-2024-42303) In the Linux kernel, the following vulnerability has been resolved: cifs: fix potential null pointer use in destroy_workqueue in init_cifs error path Dan Carpenter reported a Smack static checker warning: fs/smb/client/cifsfs.c:1981 init_cifs() error: we previously assumed 'serverclose_wq' could be null (see line 1895) The patch which introduced the serverclose workqueue used the wrong oredering in error paths in init_cifs() for freeing it on errors.(CVE-2024-42307) In the Linux kernel, the following vulnerability has been resolved: btrfs: fix extent map use-after-free when adding pages to compressed bio At add_ra_bio_pages() we are accessing the extent map to calculate 'add_size' after we dropped our reference on the extent map, resulting in a use-after-free. Fix this by computing 'add_size' before dropping our extent map reference.(CVE-2024-42314) In the Linux kernel, the following vulnerability has been resolved: exfat: fix potential deadlock on __exfat_get_dentry_set When accessing a file with more entries than ES_MAX_ENTRY_NUM, the bh-array is allocated in __exfat_get_entry_set. The problem is that the bh-array is allocated with GFP_KERNEL. It does not make sense. In the following cases, a deadlock for sbi->s_lock between the two processes may occur. CPU0 CPU1 ---- ---- kswapd balance_pgdat lock(fs_reclaim) exfat_iterate lock(&sbi->s_lock) exfat_readdir exfat_get_uniname_from_ext_entry exfat_get_dentry_set __exfat_get_dentry_set kmalloc_array ... lock(fs_reclaim) ... evict exfat_evict_inode lock(&sbi->s_lock) To fix this, let's allocate bh-array with GFP_NOFS.(CVE-2024-42315) In the Linux kernel, the following vulnerability has been resolved: mm/mglru: fix div-by-zero in vmpressure_calc_level() evict_folios() uses a second pass to reclaim folios that have gone through page writeback and become clean before it finishes the first pass, since folio_rotate_reclaimable() cannot handle those folios due to the isolation. The second pass tries to avoid potential double counting by deducting scan_control->nr_scanned. However, this can result in underflow of nr_scanned, under a condition where shrink_folio_list() does not increment nr_scanned, i.e., when folio_trylock() fails. The underflow can cause the divisor, i.e., scale=scanned+reclaimed in vmpressure_calc_level(), to become zero, resulting in the following crash: [exception RIP: vmpressure_work_fn+101] process_one_work at ffffffffa3313f2b Since scan_control->nr_scanned has no established semantics, the potential double counting has minimal risks. Therefore, fix the problem by not deducting scan_control->nr_scanned in evict_folios().(CVE-2024-42316) In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: avoid PMD-size page cache if needed xarray can't support arbitrary page cache size. the largest and supported page cache size is defined as MAX_PAGECACHE_ORDER by commit 099d90642a71 ("mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray"). However, it's possible to have 512MB page cache in the huge memory's collapsing path on ARM64 system whose base page size is 64KB. 512MB page cache is breaking the limitation and a warning is raised when the xarray entry is split as shown in the following example. [root@dhcp-10-26-1-207 ~]# cat /proc/1/smaps | grep KernelPageSize KernelPageSize: 64 kB [root@dhcp-10-26-1-207 ~]# cat /tmp/test.c : int main(int argc, char **argv) { const char *filename = TEST_XFS_FILENAME; int fd = 0; void *buf = (void *)-1, *p; int pgsize = getpagesize(); int ret = 0; if (pgsize != 0x10000) { fprintf(stdout, "System with 64KB base page size is required!\n"); return -EPERM; } system("echo 0 > /sys/devices/virtual/bdi/253:0/read_ahead_kb"); system("echo 1 > /proc/sys/vm/drop_caches"); /* Open the xfs file */ fd = open(filename, O_RDONLY); assert(fd > 0); /* Create VMA */ buf = mmap(NULL, TEST_MEM_SIZE, PROT_READ, MAP_SHARED, fd, 0); assert(buf != (void *)-1); fprintf(stdout, "mapped buffer at 0x%p\n", buf); /* Populate VMA */ ret = madvise(buf, TEST_MEM_SIZE, MADV_NOHUGEPAGE); assert(ret == 0); ret = madvise(buf, TEST_MEM_SIZE, MADV_POPULATE_READ); assert(ret == 0); /* Collapse VMA */ ret = madvise(buf, TEST_MEM_SIZE, MADV_HUGEPAGE); assert(ret == 0); ret = madvise(buf, TEST_MEM_SIZE, MADV_COLLAPSE); if (ret) { fprintf(stdout, "Error %d to madvise(MADV_COLLAPSE)\n", errno); goto out; } /* Split xarray entry. Write permission is needed */ munmap(buf, TEST_MEM_SIZE); buf = (void *)-1; close(fd); fd = open(filename, O_RDWR); assert(fd > 0); fallocate(fd, FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE, TEST_MEM_SIZE - pgsize, pgsize); out: if (buf != (void *)-1) munmap(buf, TEST_MEM_SIZE); if (fd > 0) close(fd); return ret; } [root@dhcp-10-26-1-207 ~]# gcc /tmp/test.c -o /tmp/test [root@dhcp-10-26-1-207 ~]# /tmp/test ------------[ cut here ]------------ WARNING: CPU: 25 PID: 7560 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \ nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \ nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm fuse \ xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 virtio_net \ sha1_ce net_failover virtio_blk virtio_console failover dimlib virtio_mmio CPU: 25 PID: 7560 Comm: test Kdump: loaded Not tainted 6.10.0-rc7-gavin+ #9 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : xas_split_alloc+0xf8/0x128 lr : split_huge_page_to_list_to_order+0x1c4/0x780 sp : ffff8000ac32f660 x29: ffff8000ac32f660 x28: ffff0000e0969eb0 x27: ffff8000ac32f6c0 x26: 0000000000000c40 x25: ffff0000e0969eb0 x24: 000000000000000d x23: ffff8000ac32f6c0 x22: ffffffdfc0700000 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffdfc0700000 x18: 0000000000000000 x17: 0000000000000000 x16: ffffd5f3708ffc70 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: ffffffffffffffc0 x10: 0000000000000040 x9 : ffffd5f3708e692c x8 : 0000000000000003 x7 : 0000000000000000 x6 : ffff0000e0969eb8 x5 : ffffd5f37289e378 x4 : 0000000000000000 x3 : 0000000000000c40 x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000 Call trace: xas_split_alloc+0xf8/0x128 split_huge_page_to_list_to_order+0x1c4/0x780 truncate_inode_partial_folio+0xdc/0x160 truncate_inode_pages_range+0x1b4/0x4a8 truncate_pagecache_range+0x84/0xa ---truncated---(CVE-2024-42317) In the Linux kernel, the following vulnerability has been resolved: s390/dasd: fix error checks in dasd_copy_pair_store() dasd_add_busid() can return an error via ERR_PTR() if an allocation fails. However, two callsites in dasd_copy_pair_store() do not check the result, potentially resulting in a NULL pointer dereference. Fix this by checking the result with IS_ERR() and returning the error up the stack.(CVE-2024-42320) In the Linux kernel, the following vulnerability has been resolved: net: flow_dissector: use DEBUG_NET_WARN_ON_ONCE The following splat is easy to reproduce upstream as well as in -stable kernels. Florian Westphal provided the following commit: d1dab4f71d37 ("net: add and use __skb_get_hash_symmetric_net") but this complementary fix has been also suggested by Willem de Bruijn and it can be easily backported to -stable kernel which consists in using DEBUG_NET_WARN_ON_ONCE instead to silence the following splat given __skb_get_hash() is used by the nftables tracing infrastructure to to identify packets in traces. [69133.561393] ------------[ cut here ]------------ [69133.561404] WARNING: CPU: 0 PID: 43576 at net/core/flow_dissector.c:1104 __skb_flow_dissect+0x134f/ [...] [69133.561944] CPU: 0 PID: 43576 Comm: socat Not tainted 6.10.0-rc7+ #379 [69133.561959] RIP: 0010:__skb_flow_dissect+0x134f/0x2ad0 [69133.561970] Code: 83 f9 04 0f 84 b3 00 00 00 45 85 c9 0f 84 aa 00 00 00 41 83 f9 02 0f 84 81 fc ff ff 44 0f b7 b4 24 80 00 00 00 e9 8b f9 ff ff <0f> 0b e9 20 f3 ff ff 41 f6 c6 20 0f 84 e4 ef ff ff 48 8d 7b 12 e8 [69133.561979] RSP: 0018:ffffc90000006fc0 EFLAGS: 00010246 [69133.561988] RAX: 0000000000000000 RBX: ffffffff82f33e20 RCX: ffffffff81ab7e19 [69133.561994] RDX: dffffc0000000000 RSI: ffffc90000007388 RDI: ffff888103a1b418 [69133.562001] RBP: ffffc90000007310 R08: 0000000000000000 R09: 0000000000000000 [69133.562007] R10: ffffc90000007388 R11: ffffffff810cface R12: ffff888103a1b400 [69133.562013] R13: 0000000000000000 R14: ffffffff82f33e2a R15: ffffffff82f33e28 [69133.562020] FS: 00007f40f7131740(0000) GS:ffff888390800000(0000) knlGS:0000000000000000 [69133.562027] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [69133.562033] CR2: 00007f40f7346ee0 CR3: 000000015d200001 CR4: 00000000001706f0 [69133.562040] Call Trace: [69133.562044] <IRQ> [69133.562049] ? __warn+0x9f/0x1a0 [ 1211.841384] ? __skb_flow_dissect+0x107e/0x2860 [...] [ 1211.841496] ? bpf_flow_dissect+0x160/0x160 [ 1211.841753] __skb_get_hash+0x97/0x280 [ 1211.841765] ? __skb_get_hash_symmetric+0x230/0x230 [ 1211.841776] ? mod_find+0xbf/0xe0 [ 1211.841786] ? get_stack_info_noinstr+0x12/0xe0 [ 1211.841798] ? bpf_ksym_find+0x56/0xe0 [ 1211.841807] ? __rcu_read_unlock+0x2a/0x70 [ 1211.841819] nft_trace_init+0x1b9/0x1c0 [nf_tables] [ 1211.841895] ? nft_trace_notify+0x830/0x830 [nf_tables] [ 1211.841964] ? get_stack_info+0x2b/0x80 [ 1211.841975] ? nft_do_chain_arp+0x80/0x80 [nf_tables] [ 1211.842044] nft_do_chain+0x79c/0x850 [nf_tables](CVE-2024-42321) In the Linux kernel, the following vulnerability has been resolved: net: missing check virtio Two missing check in virtio_net_hdr_to_skb() allowed syzbot to crash kernels again 1. After the skb_segment function the buffer may become non-linear (nr_frags != 0), but since the SKBTX_SHARED_FRAG flag is not set anywhere the __skb_linearize function will not be executed, then the buffer will remain non-linear. Then the condition (offset >= skb_headlen(skb)) becomes true, which causes WARN_ON_ONCE in skb_checksum_help. 2. The struct sk_buff and struct virtio_net_hdr members must be mathematically related. (gso_size) must be greater than (needed) otherwise WARN_ON_ONCE. (remainder) must be greater than (needed) otherwise WARN_ON_ONCE. (remainder) may be 0 if division is without remainder. offset+2 (4191) > skb_headlen() (1116) WARNING: CPU: 1 PID: 5084 at net/core/dev.c:3303 skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303 Modules linked in: CPU: 1 PID: 5084 Comm: syz-executor336 Not tainted 6.7.0-rc3-syzkaller-00014-gdf60cee26a2e #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 RIP: 0010:skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303 Code: 89 e8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 52 01 00 00 44 89 e2 2b 53 74 4c 89 ee 48 c7 c7 40 57 e9 8b e8 af 8f dd f8 90 <0f> 0b 90 90 e9 87 fe ff ff e8 40 0f 6e f9 e9 4b fa ff ff 48 89 ef RSP: 0018:ffffc90003a9f338 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff888025125780 RCX: ffffffff814db209 RDX: ffff888015393b80 RSI: ffffffff814db216 RDI: 0000000000000001 RBP: ffff8880251257f4 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 000000000000045c R13: 000000000000105f R14: ffff8880251257f0 R15: 000000000000105d FS: 0000555555c24380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002000f000 CR3: 0000000023151000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ip_do_fragment+0xa1b/0x18b0 net/ipv4/ip_output.c:777 ip_fragment.constprop.0+0x161/0x230 net/ipv4/ip_output.c:584 ip_finish_output_gso net/ipv4/ip_output.c:286 [inline] __ip_finish_output net/ipv4/ip_output.c:308 [inline] __ip_finish_output+0x49c/0x650 net/ipv4/ip_output.c:295 ip_finish_output+0x31/0x310 net/ipv4/ip_output.c:323 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip_output+0x13b/0x2a0 net/ipv4/ip_output.c:433 dst_output include/net/dst.h:451 [inline] ip_local_out+0xaf/0x1a0 net/ipv4/ip_output.c:129 iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82 ipip6_tunnel_xmit net/ipv6/sit.c:1034 [inline] sit_tunnel_xmit+0xed2/0x28f0 net/ipv6/sit.c:1076 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3545 [inline] dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3561 __dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4346 dev_queue_xmit include/linux/netdevice.h:3134 [inline] packet_xmit+0x257/0x380 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x24ca/0x5240 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 __sys_sendto+0x255/0x340 net/socket.c:2190 __do_sys_sendto net/socket.c:2202 [inline] __se_sys_sendto net/socket.c:2198 [inline] __x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Found by Linux Verification Center (linuxtesting.org) with Syzkaller(CVE-2024-43817) In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: Adjust error handling in case of absent codec device acpi_get_first_physical_node() can return NULL in several cases (no such device, ACPI table error, reference count drop to 0, etc). Existing check just emit error message, but doesn't perform return. Then this NULL pointer is passed to devm_acpi_dev_add_driver_gpios() where it is dereferenced. Adjust this error handling by adding error code return. Found by Linux Verification Center (linuxtesting.org) with SVACE.(CVE-2024-43818) In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix a possible null pointer dereference In function lpfc_xcvr_data_show, the memory allocation with kmalloc might fail, thereby making rdp_context a null pointer. In the following context and functions that use this pointer, there are dereferencing operations, leading to null pointer dereference. To fix this issue, a null pointer check should be added. If it is null, use scnprintf to notify the user and return len.(CVE-2024-43821) In the Linux kernel, the following vulnerability has been resolved: iio: Fix the sorting functionality in iio_gts_build_avail_time_table The sorting in iio_gts_build_avail_time_table is not working as intended. It could result in an out-of-bounds access when the time is zero. Here are more details: 1. When the gts->itime_table[i].time_us is zero, e.g., the time sequence is `3, 0, 1`, the inner for-loop will not terminate and do out-of-bound writes. This is because once `times[j] > new`, the value `new` will be added in the current position and the `times[j]` will be moved to `j+1` position, which makes the if-condition always hold. Meanwhile, idx will be added one, making the loop keep running without termination and out-of-bound write. 2. If none of the gts->itime_table[i].time_us is zero, the elements will just be copied without being sorted as described in the comment "Sort times from all tables to one and remove duplicates". For more details, please refer to https://lore.kernel.org/all/6dd0d822-046c-4dd2-9532-79d7ab96ec05@gmail.com.(CVE-2024-43825) In the Linux kernel, the following vulnerability has been resolved: nfs: pass explicit offset/count to trace events nfs_folio_length is unsafe to use without having the folio locked and a check for a NULL ->f_mapping that protects against truncations and can lead to kernel crashes. E.g. when running xfstests generic/065 with all nfs trace points enabled. Follow the model of the XFS trace points and pass in an explіcit offset and length. This has the additional benefit that these values can be more accurate as some of the users touch partial folio ranges.(CVE-2024-43826) In the Linux kernel, the following vulnerability has been resolved: drm/qxl: Add check for drm_cvt_mode Add check for the return value of drm_cvt_mode() and return the error if it fails in order to avoid NULL pointer dereference.(CVE-2024-43829) In the Linux kernel, the following vulnerability has been resolved: s390/uv: Don't call folio_wait_writeback() without a folio reference folio_wait_writeback() requires that no spinlocks are held and that a folio reference is held, as documented. After we dropped the PTL, the folio could get freed concurrently. So grab a temporary reference.(CVE-2024-43832) In the Linux kernel, the following vulnerability has been resolved: media: v4l: async: Fix NULL pointer dereference in adding ancillary links In v4l2_async_create_ancillary_links(), ancillary links are created for lens and flash sub-devices. These are sub-device to sub-device links and if the async notifier is related to a V4L2 device, the source sub-device of the ancillary link is NULL, leading to a NULL pointer dereference. Check the notifier's sd field is non-NULL in v4l2_async_create_ancillary_links(). [Sakari Ailus: Reword the subject and commit messages slightly.](CVE-2024-43833) In the Linux kernel, the following vulnerability has been resolved: bpf: Fix null pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT When loading a EXT program without specifying `attr->attach_prog_fd`, the `prog->aux->dst_prog` will be null. At this time, calling resolve_prog_type() anywhere will result in a null pointer dereference. Example stack trace: [ 8.107863] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 8.108262] Mem abort info: [ 8.108384] ESR = 0x0000000096000004 [ 8.108547] EC = 0x25: DABT (current EL), IL = 32 bits [ 8.108722] SET = 0, FnV = 0 [ 8.108827] EA = 0, S1PTW = 0 [ 8.108939] FSC = 0x04: level 0 translation fault [ 8.109102] Data abort info: [ 8.109203] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 8.109399] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 8.109614] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 8.109836] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101354000 [ 8.110011] [0000000000000004] pgd=0000000000000000, p4d=0000000000000000 [ 8.112624] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 8.112783] Modules linked in: [ 8.113120] CPU: 0 PID: 99 Comm: may_access_dire Not tainted 6.10.0-rc3-next-20240613-dirty #1 [ 8.113230] Hardware name: linux,dummy-virt (DT) [ 8.113390] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 8.113429] pc : may_access_direct_pkt_data+0x24/0xa0 [ 8.113746] lr : add_subprog_and_kfunc+0x634/0x8e8 [ 8.113798] sp : ffff80008283b9f0 [ 8.113813] x29: ffff80008283b9f0 x28: ffff800082795048 x27: 0000000000000001 [ 8.113881] x26: ffff0000c0bb2600 x25: 0000000000000000 x24: 0000000000000000 [ 8.113897] x23: ffff0000c1134000 x22: 000000000001864f x21: ffff0000c1138000 [ 8.113912] x20: 0000000000000001 x19: ffff0000c12b8000 x18: ffffffffffffffff [ 8.113929] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720 [ 8.113944] x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 [ 8.113958] x11: 0720072007200720 x10: 0000000000f9fca4 x9 : ffff80008021f4e4 [ 8.113991] x8 : 0101010101010101 x7 : 746f72705f6d656d x6 : 000000001e0e0f5f [ 8.114006] x5 : 000000000001864f x4 : ffff0000c12b8000 x3 : 000000000000001c [ 8.114020] x2 : 0000000000000002 x1 : 0000000000000000 x0 : 0000000000000000 [ 8.114126] Call trace: [ 8.114159] may_access_direct_pkt_data+0x24/0xa0 [ 8.114202] bpf_check+0x3bc/0x28c0 [ 8.114214] bpf_prog_load+0x658/0xa58 [ 8.114227] __sys_bpf+0xc50/0x2250 [ 8.114240] __arm64_sys_bpf+0x28/0x40 [ 8.114254] invoke_syscall.constprop.0+0x54/0xf0 [ 8.114273] do_el0_svc+0x4c/0xd8 [ 8.114289] el0_svc+0x3c/0x140 [ 8.114305] el0t_64_sync_handler+0x134/0x150 [ 8.114331] el0t_64_sync+0x168/0x170 [ 8.114477] Code: 7100707f 54000081 f9401c00 f9403800 (b9400403) [ 8.118672] ---[ end trace 0000000000000000 ]--- One way to fix it is by forcing `attach_prog_fd` non-empty when bpf_prog_load(). But this will lead to `libbpf_probe_bpf_prog_type` API broken which use verifier log to probe prog type and will log nothing if we reject invalid EXT prog before bpf_check(). Another way is by adding null check in resolve_prog_type(). The issue was introduced by commit 4a9c7bbe2ed4 ("bpf: Resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT") which wanted to correct type resolution for BPF_PROG_TYPE_TRACING programs. Before that, the type resolution of BPF_PROG_TYPE_EXT prog actually follows the logic below: prog->aux->dst_prog ? prog->aux->dst_prog->type : prog->type; It implies that when EXT program is not yet attached to `dst_prog`, the prog type should be EXT itself. This code worked fine in the past. So just keep using it. Fix this by returning `prog->type` for BPF_PROG_TYPE_EXT if `dst_prog` is not present in resolve_prog_type().(CVE-2024-43837) In the Linux kernel, the following vulnerability has been resolved: wifi: virt_wifi: avoid reporting connection success with wrong SSID When user issues a connection with a different SSID than the one virt_wifi has advertised, the __cfg80211_connect_result() will trigger the warning: WARN_ON(bss_not_found). The issue is because the connection code in virt_wifi does not check the SSID from user space (it only checks the BSSID), and virt_wifi will call cfg80211_connect_result() with WLAN_STATUS_SUCCESS even if the SSID is different from the one virt_wifi has advertised. Eventually cfg80211 won't be able to find the cfg80211_bss and generate the warning. Fixed it by checking the SSID (from user space) in the connection code.(CVE-2024-43841) In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: Fix array index mistake in rtw89_sta_info_get_iter() In rtw89_sta_info_get_iter() 'status->he_gi' is compared to array size. But then 'rate->he_gi' is used as array index instead of 'status->he_gi'. This can lead to go beyond array boundaries in case of 'rate->he_gi' is not equal to 'status->he_gi' and is bigger than array size. Looks like "copy-paste" mistake. Fix this mistake by replacing 'rate->he_gi' with 'status->he_gi'. Found by Linux Verification Center (linuxtesting.org) with SVACE.(CVE-2024-43842) In the Linux kernel, the following vulnerability has been resolved: udf: Fix bogus checksum computation in udf_rename() Syzbot reports uninitialized memory access in udf_rename() when updating checksum of '..' directory entry of a moved directory. This is indeed true as we pass on-stack diriter.fi to the udf_update_tag() and because that has only struct fileIdentDesc included in it and not the impUse or name fields, the checksumming function is going to checksum random stack contents beyond the end of the structure. This is actually harmless because the following udf_fiiter_write_fi() will recompute the checksum from on-disk buffers where everything is properly included. So all that is needed is just removing the bogus calculation.(CVE-2024-43845) In the Linux kernel, the following vulnerability has been resolved: lib: objagg: Fix general protection fault The library supports aggregation of objects into other objects only if the parent object does not have a parent itself. That is, nesting is not supported. Aggregation happens in two cases: Without and with hints, where hints are a pre-computed recommendation on how to aggregate the provided objects. Nesting is not possible in the first case due to a check that prevents it, but in the second case there is no check because the assumption is that nesting cannot happen when creating objects based on hints. The violation of this assumption leads to various warnings and eventually to a general protection fault [1]. Before fixing the root cause, error out when nesting happens and warn. [1] general protection fault, probably for non-canonical address 0xdead000000000d90: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 1083 Comm: kworker/1:9 Tainted: G W 6.9.0-rc6-custom-gd9b4f1cca7fb #7 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_erp_bf_insert+0x25/0x80 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_entry_add+0x256/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270 mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK>(CVE-2024-43846) In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix invalid memory access while processing fragmented packets The monitor ring and the reo reinject ring share the same ring mask index. When the driver receives an interrupt for the reo reinject ring, the monitor ring is also processed, leading to invalid memory access. Since monitor support is not yet enabled in ath12k, the ring mask for the monitor ring should be removed. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1(CVE-2024-43847) In the Linux kernel, the following vulnerability has been resolved: soc: qcom: pdr: protect locator_addr with the main mutex If the service locator server is restarted fast enough, the PDR can rewrite locator_addr fields concurrently. Protect them by placing modification of those fields under the main pdr->lock.(CVE-2024-43849) In the Linux kernel, the following vulnerability has been resolved: soc: qcom: icc-bwmon: Fix refcount imbalance seen during bwmon_remove The following warning is seen during bwmon_remove due to refcount imbalance, fix this by releasing the OPPs after use. Logs: WARNING: at drivers/opp/core.c:1640 _opp_table_kref_release+0x150/0x158 Hardware name: Qualcomm Technologies, Inc. X1E80100 CRD (DT) ... Call trace: _opp_table_kref_release+0x150/0x158 dev_pm_opp_remove_table+0x100/0x1b4 devm_pm_opp_of_table_release+0x10/0x1c devm_action_release+0x14/0x20 devres_release_all+0xa4/0x104 device_unbind_cleanup+0x18/0x60 device_release_driver_internal+0x1ec/0x228 driver_detach+0x50/0x98 bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 bwmon_driver_exit+0x18/0x524 [icc_bwmon] __arm64_sys_delete_module+0x184/0x264 invoke_syscall+0x48/0x118 el0_svc_common.constprop.0+0xc8/0xe8 do_el0_svc+0x20/0x2c el0_svc+0x34/0xdc el0t_64_sync_handler+0x13c/0x158 el0t_64_sync+0x190/0x194 --[ end trace 0000000000000000 ]---(CVE-2024-43850) In the Linux kernel, the following vulnerability has been resolved: soc: xilinx: rename cpu_number1 to dummy_cpu_number The per cpu variable cpu_number1 is passed to xlnx_event_handler as argument "dev_id", but it is not used in this function. So drop the initialization of this variable and rename it to dummy_cpu_number. This patch is to fix the following call trace when the kernel option CONFIG_DEBUG_ATOMIC_SLEEP is enabled: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 preempt_count: 1, expected: 0 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0 #53 Hardware name: Xilinx Versal vmk180 Eval board rev1.1 (QSPI) (DT) Call trace: dump_backtrace+0xd0/0xe0 show_stack+0x18/0x40 dump_stack_lvl+0x7c/0xa0 dump_stack+0x18/0x34 __might_resched+0x10c/0x140 __might_sleep+0x4c/0xa0 __kmem_cache_alloc_node+0xf4/0x168 kmalloc_trace+0x28/0x38 __request_percpu_irq+0x74/0x138 xlnx_event_manager_probe+0xf8/0x298 platform_probe+0x68/0xd8(CVE-2024-43851) In the Linux kernel, the following vulnerability has been resolved: md: fix deadlock between mddev_suspend and flush bio Deadlock occurs when mddev is being suspended while some flush bio is in progress. It is a complex issue. T1. the first flush is at the ending stage, it clears 'mddev->flush_bio' and tries to submit data, but is blocked because mddev is suspended by T4. T2. the second flush sets 'mddev->flush_bio', and attempts to queue md_submit_flush_data(), which is already running (T1) and won't execute again if on the same CPU as T1. T3. the third flush inc active_io and tries to flush, but is blocked because 'mddev->flush_bio' is not NULL (set by T2). T4. mddev_suspend() is called and waits for active_io dec to 0 which is inc by T3. T1 T2 T3 T4 (flush 1) (flush 2) (third 3) (suspend) md_submit_flush_data mddev->flush_bio = NULL; . . md_flush_request . mddev->flush_bio = bio . queue submit_flushes . . . . md_handle_request . . active_io + 1 . . md_flush_request . . wait !mddev->flush_bio . . . . mddev_suspend . . wait !active_io . . . submit_flushes . queue_work md_submit_flush_data . //md_submit_flush_data is already running (T1) . md_handle_request wait resume The root issue is non-atomic inc/dec of active_io during flush process. active_io is dec before md_submit_flush_data is queued, and inc soon after md_submit_flush_data() run. md_flush_request active_io + 1 submit_flushes active_io - 1 md_submit_flush_data md_handle_request active_io + 1 make_request active_io - 1 If active_io is dec after md_handle_request() instead of within submit_flushes(), make_request() can be called directly intead of md_handle_request() in md_submit_flush_data(), and active_io will only inc and dec once in the whole flush process. Deadlock will be fixed. Additionally, the only difference between fixing the issue and before is that there is no return error handling of make_request(). But after previous patch cleaned md_write_start(), make_requst() only return error in raid5_make_request() by dm-raid, see commit 41425f96d7aa ("dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape)". Since dm always splits data and flush operation into two separate io, io size of flush submitted by dm always is 0, make_request() will not be called in md_submit_flush_data(). To prevent future modifications from introducing issues, add WARN_ON to ensure make_request() no error is returned in this context.(CVE-2024-43855) In the Linux kernel, the following vulnerability has been resolved: dma: fix call order in dmam_free_coherent dmam_free_coherent() frees a DMA allocation, which makes the freed vaddr available for reuse, then calls devres_destroy() to remove and free the data structure used to track the DMA allocation. Between the two calls, it is possible for a concurrent task to make an allocation with the same vaddr and add it to the devres list. If this happens, there will be two entries in the devres list with the same vaddr and devres_destroy() can free the wrong entry, triggering the WARN_ON() in dmam_match. Fix by destroying the devres entry before freeing the DMA allocation. kokonut //net/encryption http://sponge2/b9145fe6-0f72-4325-ac2f-a84d81075b03(CVE-2024-43856) In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to truncate preallocated blocks in f2fs_file_open() chenyuwen reports a f2fs bug as below: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000011 fscrypt_set_bio_crypt_ctx+0x78/0x1e8 f2fs_grab_read_bio+0x78/0x208 f2fs_submit_page_read+0x44/0x154 f2fs_get_read_data_page+0x288/0x5f4 f2fs_get_lock_data_page+0x60/0x190 truncate_partial_data_page+0x108/0x4fc f2fs_do_truncate_blocks+0x344/0x5f0 f2fs_truncate_blocks+0x6c/0x134 f2fs_truncate+0xd8/0x200 f2fs_iget+0x20c/0x5ac do_garbage_collect+0x5d0/0xf6c f2fs_gc+0x22c/0x6a4 f2fs_disable_checkpoint+0xc8/0x310 f2fs_fill_super+0x14bc/0x1764 mount_bdev+0x1b4/0x21c f2fs_mount+0x20/0x30 legacy_get_tree+0x50/0xbc vfs_get_tree+0x5c/0x1b0 do_new_mount+0x298/0x4cc path_mount+0x33c/0x5fc __arm64_sys_mount+0xcc/0x15c invoke_syscall+0x60/0x150 el0_svc_common+0xb8/0xf8 do_el0_svc+0x28/0xa0 el0_svc+0x24/0x84 el0t_64_sync_handler+0x88/0xec It is because inode.i_crypt_info is not initialized during below path: - mount - f2fs_fill_super - f2fs_disable_checkpoint - f2fs_gc - f2fs_iget - f2fs_truncate So, let's relocate truncation of preallocated blocks to f2fs_file_open(), after fscrypt_file_open().(CVE-2024-43859) In the Linux kernel, the following vulnerability has been resolved: usb: vhci-hcd: Do not drop references before new references are gained At a few places the driver carries stale pointers to references that can still be used. Make sure that does not happen. This strictly speaking closes ZDI-CAN-22273, though there may be similar races in the driver.(CVE-2024-43883) In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Add error handling to pair_device() hci_conn_params_add() never checks for a NULL value and could lead to a NULL pointer dereference causing a crash. Fixed by adding error handling in the function.(CVE-2024-43884) In the Linux kernel, the following vulnerability has been resolved: padata: Fix possible divide-by-0 panic in padata_mt_helper() We are hit with a not easily reproducible divide-by-0 panic in padata.c at bootup time. [ 10.017908] Oops: divide error: 0000 1 PREEMPT SMP NOPTI [ 10.017908] CPU: 26 PID: 2627 Comm: kworker/u1666:1 Not tainted 6.10.0-15.el10.x86_64 #1 [ 10.017908] Hardware name: Lenovo ThinkSystem SR950 [7X12CTO1WW]/[7X12CTO1WW], BIOS [PSE140J-2.30] 07/20/2021 [ 10.017908] Workqueue: events_unbound padata_mt_helper [ 10.017908] RIP: 0010:padata_mt_helper+0x39/0xb0 : [ 10.017963] Call Trace: [ 10.017968] <TASK> [ 10.018004] ? padata_mt_helper+0x39/0xb0 [ 10.018084] process_one_work+0x174/0x330 [ 10.018093] worker_thread+0x266/0x3a0 [ 10.018111] kthread+0xcf/0x100 [ 10.018124] ret_from_fork+0x31/0x50 [ 10.018138] ret_from_fork_asm+0x1a/0x30 [ 10.018147] </TASK> Looking at the padata_mt_helper() function, the only way a divide-by-0 panic can happen is when ps->chunk_size is 0. The way that chunk_size is initialized in padata_do_multithreaded(), chunk_size can be 0 when the min_chunk in the passed-in padata_mt_job structure is 0. Fix this divide-by-0 panic by making sure that chunk_size will be at least 1 no matter what the input parameters are.(CVE-2024-43889) In the Linux kernel, the following vulnerability has been resolved: tracing: Fix overflow in get_free_elt() "tracing_map->next_elt" in get_free_elt() is at risk of overflowing. Once it overflows, new elements can still be inserted into the tracing_map even though the maximum number of elements (`max_elts`) has been reached. Continuing to insert elements after the overflow could result in the tracing_map containing "tracing_map->max_size" elements, leaving no empty entries. If any attempt is made to insert an element into a full tracing_map using `__tracing_map_insert()`, it will cause an infinite loop with preemption disabled, leading to a CPU hang problem. Fix this by preventing any further increments to "tracing_map->next_elt" once it reaches "tracing_map->max_elt".(CVE-2024-43890) In the Linux kernel, the following vulnerability has been resolved: tracing: Have format file honor EVENT_FILE_FL_FREED When eventfs was introduced, special care had to be done to coordinate the freeing of the file meta data with the files that are exposed to user space. The file meta data would have a ref count that is set when the file is created and would be decremented and freed after the last user that opened the file closed it. When the file meta data was to be freed, it would set a flag (EVENT_FILE_FL_FREED) to denote that the file is freed, and any new references made (like new opens or reads) would fail as it is marked freed. This allowed other meta data to be freed after this flag was set (under the event_mutex). All the files that were dynamically created in the events directory had a pointer to the file meta data and would call event_release() when the last reference to the user space file was closed. This would be the time that it is safe to free the file meta data. A shortcut was made for the "format" file. It's i_private would point to the "call" entry directly and not point to the file's meta data. This is because all format files are the same for the same "call", so it was thought there was no reason to differentiate them. The other files maintain state (like the "enable", "trigger", etc). But this meant if the file were to disappear, the "format" file would be unaware of it. This caused a race that could be trigger via the user_events test (that would create dynamic events and free them), and running a loop that would read the user_events format files: In one console run: # cd tools/testing/selftests/user_events # while true; do ./ftrace_test; done And in another console run: # cd /sys/kernel/tracing/ # while true; do cat events/user_events/__test_event/format; done 2>/dev/null With KASAN memory checking, it would trigger a use-after-free bug report (which was a real bug). This was because the format file was not checking the file's meta data flag "EVENT_FILE_FL_FREED", so it would access the event that the file meta data pointed to after the event was freed. After inspection, there are other locations that were found to not check the EVENT_FILE_FL_FREED flag when accessing the trace_event_file. Add a new helper function: event_file_file() that will make sure that the event_mutex is held, and will return NULL if the trace_event_file has the EVENT_FILE_FL_FREED flag set. Have the first reference of the struct file pointer use event_file_file() and check for NULL. Later uses can still use the event_file_data() helper function if the event_mutex is still held and was not released since the event_file_file() call.(CVE-2024-43891) In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip Recompute DSC Params if no Stream on Link [why] Encounter NULL pointer dereference uner mst + dsc setup. BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2 Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022 RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? plist_add+0xbe/0x100 ? exc_page_fault+0x7c/0x180 ? asm_exc_page_fault+0x26/0x30 ? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] ? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] ? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] drm_atomic_check_only+0x5c5/0xa40 drm_mode_atomic_ioctl+0x76e/0xbc0 [how] dsc recompute should be skipped if no mode change detected on the new request. If detected, keep checking whether the stream is already on current state or not. (cherry picked from commit 8151a6c13111b465dbabe07c19f572f7cbd16fef)(CVE-2024-43895) In the Linux kernel, the following vulnerability has been resolved: net: drop bad gso csum_start and offset in virtio_net_hdr Tighten csum_start and csum_offset checks in virtio_net_hdr_to_skb for GSO packets. The function already checks that a checksum requested with VIRTIO_NET_HDR_F_NEEDS_CSUM is in skb linear. But for GSO packets this might not hold for segs after segmentation. Syzkaller demonstrated to reach this warning in skb_checksum_help offset = skb_checksum_start_offset(skb); ret = -EINVAL; if (WARN_ON_ONCE(offset >= skb_headlen(skb))) By injecting a TSO packet: WARNING: CPU: 1 PID: 3539 at net/core/dev.c:3284 skb_checksum_help+0x3d0/0x5b0 ip_do_fragment+0x209/0x1b20 net/ipv4/ip_output.c:774 ip_finish_output_gso net/ipv4/ip_output.c:279 [inline] __ip_finish_output+0x2bd/0x4b0 net/ipv4/ip_output.c:301 iptunnel_xmit+0x50c/0x930 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x2296/0x2c70 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x759/0xa60 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4850 [inline] netdev_start_xmit include/linux/netdevice.h:4864 [inline] xmit_one net/core/dev.c:3595 [inline] dev_hard_start_xmit+0x261/0x8c0 net/core/dev.c:3611 __dev_queue_xmit+0x1b97/0x3c90 net/core/dev.c:4261 packet_snd net/packet/af_packet.c:3073 [inline] The geometry of the bad input packet at tcp_gso_segment: [ 52.003050][ T8403] skb len=12202 headroom=244 headlen=12093 tailroom=0 [ 52.003050][ T8403] mac=(168,24) mac_len=24 net=(192,52) trans=244 [ 52.003050][ T8403] shinfo(txflags=0 nr_frags=1 gso(size=1552 type=3 segs=0)) [ 52.003050][ T8403] csum(0x60000c7 start=199 offset=1536 ip_summed=3 complete_sw=0 valid=0 level=0) Mitigate with stricter input validation. csum_offset: for GSO packets, deduce the correct value from gso_type. This is already done for USO. Extend it to TSO. Let UFO be: udp[46]_ufo_fragment ignores these fields and always computes the checksum in software. csum_start: finding the real offset requires parsing to the transport header. Do not add a parser, use existing segmentation parsing. Thanks to SKB_GSO_DODGY, that also catches bad packets that are hw offloaded. Again test both TSO and USO. Do not test UFO for the above reason, and do not test UDP tunnel offload. GSO packet are almost always CHECKSUM_PARTIAL. USO packets may be CHECKSUM_NONE since commit 10154dbded6d6 ("udp: Allow GSO transmit from devices with no checksum offload"), but then still these fields are initialized correctly in udp4_hwcsum/udp6_hwcsum_outgoing. So no need to test for ip_summed == CHECKSUM_PARTIAL first. This revises an existing fix mentioned in the Fixes tag, which broke small packets with GSO offload, as detected by kselftests.(CVE-2024-43897) Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.(CVE-2024-43898) In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null pointer deref in dcn20_resource.c Fixes a hang thats triggered when MPV is run on a DCN401 dGPU: mpv --hwdec=vaapi --vo=gpu --hwdec-codecs=all and then enabling fullscreen playback (double click on the video) The following calltrace will be seen: [ 181.843989] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 181.843997] #PF: supervisor instruction fetch in kernel mode [ 181.844003] #PF: error_code(0x0010) - not-present page [ 181.844009] PGD 0 P4D 0 [ 181.844020] Oops: 0010 [#1] PREEMPT SMP NOPTI [ 181.844028] CPU: 6 PID: 1892 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic #41~22.04.2-Ubuntu [ 181.844038] Hardware name: System manufacturer System Product Name/CROSSHAIR VI HERO, BIOS 6302 10/23/2018 [ 181.844044] RIP: 0010:0x0 [ 181.844079] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 181.844084] RSP: 0018:ffffb593c2b8f7b0 EFLAGS: 00010246 [ 181.844093] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004 [ 181.844099] RDX: ffffb593c2b8f804 RSI: ffffb593c2b8f7e0 RDI: ffff9e3c8e758400 [ 181.844105] RBP: ffffb593c2b8f7b8 R08: ffffb593c2b8f9c8 R09: ffffb593c2b8f96c [ 181.844110] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb593c2b8f9c8 [ 181.844115] R13: 0000000000000001 R14: ffff9e3c88000000 R15: 0000000000000005 [ 181.844121] FS: 00007c6e323bb5c0(0000) GS:ffff9e3f85f80000(0000) knlGS:0000000000000000 [ 181.844128] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 181.844134] CR2: ffffffffffffffd6 CR3: 0000000140fbe000 CR4: 00000000003506e0 [ 181.844141] Call Trace: [ 181.844146] <TASK> [ 181.844153] ? show_regs+0x6d/0x80 [ 181.844167] ? __die+0x24/0x80 [ 181.844179] ? page_fault_oops+0x99/0x1b0 [ 181.844192] ? do_user_addr_fault+0x31d/0x6b0 [ 181.844204] ? exc_page_fault+0x83/0x1b0 [ 181.844216] ? asm_exc_page_fault+0x27/0x30 [ 181.844237] dcn20_get_dcc_compression_cap+0x23/0x30 [amdgpu] [ 181.845115] amdgpu_dm_plane_validate_dcc.constprop.0+0xe5/0x180 [amdgpu] [ 181.845985] amdgpu_dm_plane_fill_plane_buffer_attributes+0x300/0x580 [amdgpu] [ 181.846848] fill_dc_plane_info_and_addr+0x258/0x350 [amdgpu] [ 181.847734] fill_dc_plane_attributes+0x162/0x350 [amdgpu] [ 181.848748] dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.849791] ? dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu] [ 181.850840] amdgpu_dm_atomic_check+0xdfe/0x1760 [amdgpu](CVE-2024-43899) In the Linux kernel, the following vulnerability has been resolved: media: xc2028: avoid use-after-free in load_firmware_cb() syzkaller reported use-after-free in load_firmware_cb() [1]. The reason is because the module allocated a struct tuner in tuner_probe(), and then the module initialization failed, the struct tuner was released. A worker which created during module initialization accesses this struct tuner later, it caused use-after-free. The process is as follows: task-6504 worker_thread tuner_probe <= alloc dvb_frontend [2] ... request_firmware_nowait <= create a worker ... tuner_remove <= free dvb_frontend ... request_firmware_work_func <= the firmware is ready load_firmware_cb <= but now the dvb_frontend has been freed To fix the issue, check the dvd_frontend in load_firmware_cb(), if it is null, report a warning and just return. [1]: ================================================================== BUG: KASAN: use-after-free in load_firmware_cb+0x1310/0x17a0 Read of size 8 at addr ffff8000d7ca2308 by task kworker/2:3/6504 Call trace: load_firmware_cb+0x1310/0x17a0 request_firmware_work_func+0x128/0x220 process_one_work+0x770/0x1824 worker_thread+0x488/0xea0 kthread+0x300/0x430 ret_from_fork+0x10/0x20 Allocated by task 6504: kzalloc tuner_probe+0xb0/0x1430 i2c_device_probe+0x92c/0xaf0 really_probe+0x678/0xcd0 driver_probe_device+0x280/0x370 __device_attach_driver+0x220/0x330 bus_for_each_drv+0x134/0x1c0 __device_attach+0x1f4/0x410 device_initial_probe+0x20/0x30 bus_probe_device+0x184/0x200 device_add+0x924/0x12c0 device_register+0x24/0x30 i2c_new_device+0x4e0/0xc44 v4l2_i2c_new_subdev_board+0xbc/0x290 v4l2_i2c_new_subdev+0xc8/0x104 em28xx_v4l2_init+0x1dd0/0x3770 Freed by task 6504: kfree+0x238/0x4e4 tuner_remove+0x144/0x1c0 i2c_device_remove+0xc8/0x290 __device_release_driver+0x314/0x5fc device_release_driver+0x30/0x44 bus_remove_device+0x244/0x490 device_del+0x350/0x900 device_unregister+0x28/0xd0 i2c_unregister_device+0x174/0x1d0 v4l2_device_unregister+0x224/0x380 em28xx_v4l2_init+0x1d90/0x3770 The buggy address belongs to the object at ffff8000d7ca2000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 776 bytes inside of 2048-byte region [ffff8000d7ca2000, ffff8000d7ca2800) The buggy address belongs to the page: page:ffff7fe00035f280 count:1 mapcount:0 mapping:ffff8000c001f000 index:0x0 flags: 0x7ff800000000100(slab) raw: 07ff800000000100 ffff7fe00049d880 0000000300000003 ffff8000c001f000 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8000d7ca2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8000d7ca2300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8000d7ca2380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== [2] Actually, it is allocated for struct tuner, and dvb_frontend is inside.(CVE-2024-43900) In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null checker before passing variables Checks null pointer before passing variables to functions. This fixes 3 NULL_RETURNS issues reported by Coverity.(CVE-2024-43902) In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Fix the null pointer dereference for vega10_hwmgr Check return value and conduct null pointer handling to avoid null pointer dereference.(CVE-2024-43905) In the Linux kernel, the following vulnerability has been resolved: drm/admgpu: fix dereferencing null pointer context When user space sets an invalid ta type, the pointer context will be empty. So it need to check the pointer context before using it(CVE-2024-43906) In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm: Fix the null pointer dereference in apply_state_adjust_rules Check the pointer value to fix potential null pointer dereference(CVE-2024-43907) In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix the null pointer dereference to ras_manager Check ras_manager before using it(CVE-2024-43908) In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm: Fix the null pointer dereference for smu7 optimize the code to avoid pass a null pointer (hwmgr->backend) to function smu7_update_edc_leakage_table.(CVE-2024-43909) In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: disallow setting special AP channel widths Setting the AP channel width is meant for use with the normal 20/40/... MHz channel width progression, and switching around in S1G or narrow channels isn't supported. Disallow that.(CVE-2024-43912) In the Linux kernel, the following vulnerability has been resolved: nvme: apple: fix device reference counting Drivers must call nvme_uninit_ctrl after a successful nvme_init_ctrl. Split the allocation side out to make the error handling boundary easier to navigate. The apple driver had been doing this wrong, leaking the controller device memory on a tagset failure.(CVE-2024-43913) In the Linux kernel, the following vulnerability has been resolved: md/raid5: avoid BUG_ON() while continue reshape after reassembling Currently, mdadm support --revert-reshape to abort the reshape while reassembling, as the test 07revert-grow. However, following BUG_ON() can be triggerred by the test: kernel BUG at drivers/md/raid5.c:6278! invalid opcode: 0000 [#1] PREEMPT SMP PTI irq event stamp: 158985 CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94 RIP: 0010:reshape_request+0x3f1/0xe60 Call Trace: <TASK> raid5_sync_request+0x43d/0x550 md_do_sync+0xb7a/0x2110 md_thread+0x294/0x2b0 kthread+0x147/0x1c0 ret_from_fork+0x59/0x70 ret_from_fork_asm+0x1a/0x30 </TASK> Root cause is that --revert-reshape update the raid_disks from 5 to 4, while reshape position is still set, and after reassembling the array, reshape position will be read from super block, then during reshape the checking of 'writepos' that is caculated by old reshape position will fail. Fix this panic the easy way first, by converting the BUG_ON() to WARN_ON(), and stop the reshape if checkings fail. Noted that mdadm must fix --revert-shape as well, and probably md/raid should enhance metadata validation as well, however this means reassemble will fail and there must be user tools to fix the wrong metadata.(CVE-2024-43914) In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: wait for previous gc cycles when removing port syzbot hit a use-after-free[1] which is caused because the bridge doesn't make sure that all previous garbage has been collected when removing a port. What happens is: CPU 1 CPU 2 start gc cycle remove port acquire gc lock first wait for lock call br_multicasg_gc() directly acquire lock now but free port the port can be freed while grp timers still running Make sure all previous gc cycles have finished by using flush_work before freeing the port. [1] BUG: KASAN: slab-use-after-free in br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861 Read of size 8 at addr ffff888071d6d000 by task syz.5.1232/9699 CPU: 1 PID: 9699 Comm: syz.5.1232 Not tainted 6.10.0-rc5-syzkaller-00021-g24ca36a562d6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861 call_timer_fn+0x1a3/0x610 kernel/time/timer.c:1792 expire_timers kernel/time/timer.c:1843 [inline] __run_timers+0x74b/0xaf0 kernel/time/timer.c:2417 __run_timer_base kernel/time/timer.c:2428 [inline] __run_timer_base kernel/time/timer.c:2421 [inline] run_timer_base+0x111/0x190 kernel/time/timer.c:2437(CVE-2024-44934) In the Linux kernel, the following vulnerability has been resolved: sctp: Fix null-ptr-deref in reuseport_add_sock(). syzbot reported a null-ptr-deref while accessing sk2->sk_reuseport_cb in reuseport_add_sock(). [0] The repro first creates a listener with SO_REUSEPORT. Then, it creates another listener on the same port and concurrently closes the first listener. The second listen() calls reuseport_add_sock() with the first listener as sk2, where sk2->sk_reuseport_cb is not expected to be cleared concurrently, but the close() does clear it by reuseport_detach_sock(). The problem is SCTP does not properly synchronise reuseport_alloc(), reuseport_add_sock(), and reuseport_detach_sock(). The caller of reuseport_alloc() and reuseport_{add,detach}_sock() must provide synchronisation for sockets that are classified into the same reuseport group. Otherwise, such sockets form multiple identical reuseport groups, and all groups except one would be silently dead. 1. Two sockets call listen() concurrently 2. No socket in the same group found in sctp_ep_hashtable[] 3. Two sockets call reuseport_alloc() and form two reuseport groups 4. Only one group hit first in __sctp_rcv_lookup_endpoint() receives incoming packets Also, the reported null-ptr-deref could occur. TCP/UDP guarantees that would not happen by holding the hash bucket lock. Let's apply the locking strategy to __sctp_hash_endpoint() and __sctp_unhash_endpoint(). [0]: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 UID: 0 PID: 10230 Comm: syz-executor119 Not tainted 6.10.0-syzkaller-12585-g301927d2d2eb #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 RIP: 0010:reuseport_add_sock+0x27e/0x5e0 net/core/sock_reuseport.c:350 Code: 00 0f b7 5d 00 bf 01 00 00 00 89 de e8 1b a4 ff f7 83 fb 01 0f 85 a3 01 00 00 e8 6d a0 ff f7 49 8d 7e 12 48 89 f8 48 c1 e8 03 <42> 0f b6 04 28 84 c0 0f 85 4b 02 00 00 41 0f b7 5e 12 49 8d 7e 14 RSP: 0018:ffffc9000b947c98 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff8880252ddf98 RCX: ffff888079478000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000012 RBP: 0000000000000001 R08: ffffffff8993e18d R09: 1ffffffff1fef385 R10: dffffc0000000000 R11: fffffbfff1fef386 R12: ffff8880252ddac0 R13: dffffc0000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f24e45b96c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffcced5f7b8 CR3: 00000000241be000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __sctp_hash_endpoint net/sctp/input.c:762 [inline] sctp_hash_endpoint+0x52a/0x600 net/sctp/input.c:790 sctp_listen_start net/sctp/socket.c:8570 [inline] sctp_inet_listen+0x767/0xa20 net/sctp/socket.c:8625 __sys_listen_socket net/socket.c:1883 [inline] __sys_listen+0x1b7/0x230 net/socket.c:1894 __do_sys_listen net/socket.c:1902 [inline] __se_sys_listen net/socket.c:1900 [inline] __x64_sys_listen+0x5a/0x70 net/socket.c:1900 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f24e46039b9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f24e45b9228 EFLAGS: 00000246 ORIG_RAX: 0000000000000032 RAX: ffffffffffffffda RBX: 00007f24e468e428 RCX: 00007f24e46039b9 RDX: 00007f24e46039b9 RSI: 0000000000000003 RDI: 0000000000000004 RBP: 00007f24e468e420 R08: 00007f24e45b96c0 R09: 00007f24e45b96c0 R10: 00007f24e45b96c0 R11: 0000000000000246 R12: 00007f24e468e42c R13: ---truncated---(CVE-2024-44935) In the Linux kernel, the following vulnerability has been resolved: fou: remove warn in gue_gro_receive on unsupported protocol Drop the WARN_ON_ONCE inn gue_gro_receive if the encapsulated type is not known or does not have a GRO handler. Such a packet is easily constructed. Syzbot generates them and sets off this warning. Remove the warning as it is expected and not actionable. The warning was previously reduced from WARN_ON to WARN_ON_ONCE in commit 270136613bf7 ("fou: Do WARN_ON_ONCE in gue_gro_receive for bad proto callbacks").(CVE-2024-44940) In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on F2FS_INLINE_DATA flag in inode during GC syzbot reports a f2fs bug as below: ------------[ cut here ]------------ kernel BUG at fs/f2fs/inline.c:258! CPU: 1 PID: 34 Comm: kworker/u8:2 Not tainted 6.9.0-rc6-syzkaller-00012-g9e4bc4bcae01 #0 RIP: 0010:f2fs_write_inline_data+0x781/0x790 fs/f2fs/inline.c:258 Call Trace: f2fs_write_single_data_page+0xb65/0x1d60 fs/f2fs/data.c:2834 f2fs_write_cache_pages fs/f2fs/data.c:3133 [inline] __f2fs_write_data_pages fs/f2fs/data.c:3288 [inline] f2fs_write_data_pages+0x1efe/0x3a90 fs/f2fs/data.c:3315 do_writepages+0x35b/0x870 mm/page-writeback.c:2612 __writeback_single_inode+0x165/0x10b0 fs/fs-writeback.c:1650 writeback_sb_inodes+0x905/0x1260 fs/fs-writeback.c:1941 wb_writeback+0x457/0xce0 fs/fs-writeback.c:2117 wb_do_writeback fs/fs-writeback.c:2264 [inline] wb_workfn+0x410/0x1090 fs/fs-writeback.c:2304 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0xa12/0x17c0 kernel/workqueue.c:3335 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416 kthread+0x2f2/0x390 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 The root cause is: inline_data inode can be fuzzed, so that there may be valid blkaddr in its direct node, once f2fs triggers background GC to migrate the block, it will hit f2fs_bug_on() during dirty page writeback. Let's add sanity check on F2FS_INLINE_DATA flag in inode during GC, so that, it can forbid migrating inline_data inode's data block for fixing.(CVE-2024-44942) In the Linux kernel, the following vulnerability has been resolved: kcm: Serialise kcm_sendmsg() for the same socket. syzkaller reported UAF in kcm_release(). [0] The scenario is 1. Thread A builds a skb with MSG_MORE and sets kcm->seq_skb. 2. Thread A resumes building skb from kcm->seq_skb but is blocked by sk_stream_wait_memory() 3. Thread B calls sendmsg() concurrently, finishes building kcm->seq_skb and puts the skb to the write queue 4. Thread A faces an error and finally frees skb that is already in the write queue 5. kcm_release() does double-free the skb in the write queue When a thread is building a MSG_MORE skb, another thread must not touch it. Let's add a per-sk mutex and serialise kcm_sendmsg(). [0]: BUG: KASAN: slab-use-after-free in __skb_unlink include/linux/skbuff.h:2366 [inline] BUG: KASAN: slab-use-after-free in __skb_dequeue include/linux/skbuff.h:2385 [inline] BUG: KASAN: slab-use-after-free in __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline] BUG: KASAN: slab-use-after-free in __skb_queue_purge include/linux/skbuff.h:3181 [inline] BUG: KASAN: slab-use-after-free in kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691 Read of size 8 at addr ffff0000ced0fc80 by task syz-executor329/6167 CPU: 1 PID: 6167 Comm: syz-executor329 Tainted: G B 6.8.0-rc5-syzkaller-g9abbc24128bc #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call trace: dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:291 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:298 __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0x178/0x518 mm/kasan/report.c:488 kasan_report+0xd8/0x138 mm/kasan/report.c:601 __asan_report_load8_noabort+0x20/0x2c mm/kasan/report_generic.c:381 __skb_unlink include/linux/skbuff.h:2366 [inline] __skb_dequeue include/linux/skbuff.h:2385 [inline] __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline] __skb_queue_purge include/linux/skbuff.h:3181 [inline] kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691 __sock_release net/socket.c:659 [inline] sock_close+0xa4/0x1e8 net/socket.c:1421 __fput+0x30c/0x738 fs/file_table.c:376 ____fput+0x20/0x30 fs/file_table.c:404 task_work_run+0x230/0x2e0 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x618/0x1f64 kernel/exit.c:871 do_group_exit+0x194/0x22c kernel/exit.c:1020 get_signal+0x1500/0x15ec kernel/signal.c:2893 do_signal+0x23c/0x3b44 arch/arm64/kernel/signal.c:1249 do_notify_resume+0x74/0x1f4 arch/arm64/kernel/entry-common.c:148 exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline] exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline] el0_svc+0xac/0x168 arch/arm64/kernel/entry-common.c:713 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Allocated by task 6166: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x40/0x78 mm/kasan/common.c:68 kasan_save_alloc_info+0x70/0x84 mm/kasan/generic.c:626 unpoison_slab_object mm/kasan/common.c:314 [inline] __kasan_slab_alloc+0x74/0x8c mm/kasan/common.c:340 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3813 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_node+0x204/0x4c0 mm/slub.c:3903 __alloc_skb+0x19c/0x3d8 net/core/skbuff.c:641 alloc_skb include/linux/skbuff.h:1296 [inline] kcm_sendmsg+0x1d3c/0x2124 net/kcm/kcmsock.c:783 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_sendmsg+0x220/0x2c0 net/socket.c:768 splice_to_socket+0x7cc/0xd58 fs/splice.c:889 do_splice_from fs/splice.c:941 [inline] direct_splice_actor+0xec/0x1d8 fs/splice.c:1164 splice_direct_to_actor+0x438/0xa0c fs/splice.c:1108 do_splice_direct_actor ---truncated---(CVE-2024-44946) In the Linux kernel, the following vulnerability has been resolved: fuse: Initialize beyond-EOF page contents before setting uptodate fuse_notify_store(), unlike fuse_do_readpage(), does not enable page zeroing (because it can be used to change partial page contents). So fuse_notify_store() must be more careful to fully initialize page contents (including parts of the page that are beyond end-of-file) before marking the page uptodate. The current code can leave beyond-EOF page contents uninitialized, which makes these uninitialized page contents visible to userspace via mmap(). This is an information leak, but only affects systems which do not enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the corresponding kernel command line parameter).(CVE-2024-44947) In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Forward soft recovery errors to userspace As we discussed before[1], soft recovery should be forwarded to userspace, or we can get into a really bad state where apps will keep submitting hanging command buffers cascading us to a hard reset. 1: https://lore.kernel.org/all/bf23d5ed-9a6b-43e7-84ee-8cbfd0d60f18@froggi.es/ (cherry picked from commit 434967aadbbbe3ad9103cc29e9a327de20fdba01)(CVE-2024-44961) In the Linux kernel, the following vulnerability has been resolved: binfmt_flat: Fix corruption when not offsetting data start Commit 04d82a6d0881 ("binfmt_flat: allow not offsetting data start") introduced a RISC-V specific variant of the FLAT format which does not allocate any space for the (obsolete) array of shared library pointers. However, it did not disable the code which initializes the array, resulting in the corruption of sizeof(long) bytes before the DATA segment, generally the end of the TEXT segment. Introduce MAX_SHARED_LIBS_UPDATE which depends on the state of CONFIG_BINFMT_FLAT_NO_DATA_START_OFFSET to guard the initialization of the shared library pointer region so that it will only be initialized if space is reserved for it.(CVE-2024-44966) In the Linux kernel, the following vulnerability has been resolved: net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register() bcm_sf2_mdio_register() calls of_phy_find_device() and then phy_device_remove() in a loop to remove existing PHY devices. of_phy_find_device() eventually calls bus_find_device(), which calls get_device() on the returned struct device * to increment the refcount. The current implementation does not decrement the refcount, which causes memory leak. This commit adds the missing phy_device_free() call to decrement the refcount via put_device() to balance the refcount.(CVE-2024-44971) An update for kernel is now available for openEuler-24.03-LTS. openEuler Security has rated this update as having a security impact of high. A Common Vunlnerability Scoring System(CVSS)base score,which gives a detailed severity rating, is available for each vulnerability from the CVElink(s) in the References section. High kernel https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-36934 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-37078 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-40959 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-40976 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-40978 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-41012 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-41016 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-41037 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-41052 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-41071 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-41082 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-41098 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42139 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42152 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42153 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42234 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42235 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42237 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42238 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42239 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42240 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42241 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42243 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42248 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42250 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42253 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42258 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42259 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42271 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42272 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42276 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42277 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42279 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42291 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42294 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42296 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42298 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42303 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42307 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42314 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42315 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42316 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42317 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42320 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42321 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43817 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43818 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43821 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43825 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43826 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43829 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43832 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43833 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43837 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43841 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43842 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43845 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43846 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43847 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43849 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43850 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43851 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43855 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43856 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43859 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43883 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43884 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43889 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43890 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43891 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43895 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43897 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43898 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43899 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43900 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43902 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43905 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43906 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43907 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43908 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43909 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43912 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43913 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43914 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-44934 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-44935 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-44940 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-44942 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-44946 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-44947 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-44961 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-44966 https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-44971 https://nvd.nist.gov/vuln/detail/CVE-2024-36934 https://nvd.nist.gov/vuln/detail/CVE-2024-37078 https://nvd.nist.gov/vuln/detail/CVE-2024-40959 https://nvd.nist.gov/vuln/detail/CVE-2024-40976 https://nvd.nist.gov/vuln/detail/CVE-2024-40978 https://nvd.nist.gov/vuln/detail/CVE-2024-41012 https://nvd.nist.gov/vuln/detail/CVE-2024-41016 https://nvd.nist.gov/vuln/detail/CVE-2024-41037 https://nvd.nist.gov/vuln/detail/CVE-2024-41052 https://nvd.nist.gov/vuln/detail/CVE-2024-41071 https://nvd.nist.gov/vuln/detail/CVE-2024-41082 https://nvd.nist.gov/vuln/detail/CVE-2024-41098 https://nvd.nist.gov/vuln/detail/CVE-2024-42139 https://nvd.nist.gov/vuln/detail/CVE-2024-42152 https://nvd.nist.gov/vuln/detail/CVE-2024-42153 https://nvd.nist.gov/vuln/detail/CVE-2024-42234 https://nvd.nist.gov/vuln/detail/CVE-2024-42235 https://nvd.nist.gov/vuln/detail/CVE-2024-42237 https://nvd.nist.gov/vuln/detail/CVE-2024-42238 https://nvd.nist.gov/vuln/detail/CVE-2024-42239 https://nvd.nist.gov/vuln/detail/CVE-2024-42240 https://nvd.nist.gov/vuln/detail/CVE-2024-42241 https://nvd.nist.gov/vuln/detail/CVE-2024-42243 https://nvd.nist.gov/vuln/detail/CVE-2024-42248 https://nvd.nist.gov/vuln/detail/CVE-2024-42250 https://nvd.nist.gov/vuln/detail/CVE-2024-42253 https://nvd.nist.gov/vuln/detail/CVE-2024-42258 https://nvd.nist.gov/vuln/detail/CVE-2024-42259 https://nvd.nist.gov/vuln/detail/CVE-2024-42271 https://nvd.nist.gov/vuln/detail/CVE-2024-42272 https://nvd.nist.gov/vuln/detail/CVE-2024-42276 https://nvd.nist.gov/vuln/detail/CVE-2024-42277 https://nvd.nist.gov/vuln/detail/CVE-2024-42279 https://nvd.nist.gov/vuln/detail/CVE-2024-42291 https://nvd.nist.gov/vuln/detail/CVE-2024-42294 https://nvd.nist.gov/vuln/detail/CVE-2024-42296 https://nvd.nist.gov/vuln/detail/CVE-2024-42298 https://nvd.nist.gov/vuln/detail/CVE-2024-42303 https://nvd.nist.gov/vuln/detail/CVE-2024-42307 https://nvd.nist.gov/vuln/detail/CVE-2024-42314 https://nvd.nist.gov/vuln/detail/CVE-2024-42315 https://nvd.nist.gov/vuln/detail/CVE-2024-42316 https://nvd.nist.gov/vuln/detail/CVE-2024-42317 https://nvd.nist.gov/vuln/detail/CVE-2024-42320 https://nvd.nist.gov/vuln/detail/CVE-2024-42321 https://nvd.nist.gov/vuln/detail/CVE-2024-43817 https://nvd.nist.gov/vuln/detail/CVE-2024-43818 https://nvd.nist.gov/vuln/detail/CVE-2024-43821 https://nvd.nist.gov/vuln/detail/CVE-2024-43825 https://nvd.nist.gov/vuln/detail/CVE-2024-43826 https://nvd.nist.gov/vuln/detail/CVE-2024-43829 https://nvd.nist.gov/vuln/detail/CVE-2024-43832 https://nvd.nist.gov/vuln/detail/CVE-2024-43833 https://nvd.nist.gov/vuln/detail/CVE-2024-43837 https://nvd.nist.gov/vuln/detail/CVE-2024-43841 https://nvd.nist.gov/vuln/detail/CVE-2024-43842 https://nvd.nist.gov/vuln/detail/CVE-2024-43845 https://nvd.nist.gov/vuln/detail/CVE-2024-43846 https://nvd.nist.gov/vuln/detail/CVE-2024-43847 https://nvd.nist.gov/vuln/detail/CVE-2024-43849 https://nvd.nist.gov/vuln/detail/CVE-2024-43850 https://nvd.nist.gov/vuln/detail/CVE-2024-43851 https://nvd.nist.gov/vuln/detail/CVE-2024-43855 https://nvd.nist.gov/vuln/detail/CVE-2024-43856 https://nvd.nist.gov/vuln/detail/CVE-2024-43859 https://nvd.nist.gov/vuln/detail/CVE-2024-43883 https://nvd.nist.gov/vuln/detail/CVE-2024-43884 https://nvd.nist.gov/vuln/detail/CVE-2024-43889 https://nvd.nist.gov/vuln/detail/CVE-2024-43890 https://nvd.nist.gov/vuln/detail/CVE-2024-43891 https://nvd.nist.gov/vuln/detail/CVE-2024-43895 https://nvd.nist.gov/vuln/detail/CVE-2024-43897 https://nvd.nist.gov/vuln/detail/CVE-2024-43898 https://nvd.nist.gov/vuln/detail/CVE-2024-43899 https://nvd.nist.gov/vuln/detail/CVE-2024-43900 https://nvd.nist.gov/vuln/detail/CVE-2024-43902 https://nvd.nist.gov/vuln/detail/CVE-2024-43905 https://nvd.nist.gov/vuln/detail/CVE-2024-43906 https://nvd.nist.gov/vuln/detail/CVE-2024-43907 https://nvd.nist.gov/vuln/detail/CVE-2024-43908 https://nvd.nist.gov/vuln/detail/CVE-2024-43909 https://nvd.nist.gov/vuln/detail/CVE-2024-43912 https://nvd.nist.gov/vuln/detail/CVE-2024-43913 https://nvd.nist.gov/vuln/detail/CVE-2024-43914 https://nvd.nist.gov/vuln/detail/CVE-2024-44934 https://nvd.nist.gov/vuln/detail/CVE-2024-44935 https://nvd.nist.gov/vuln/detail/CVE-2024-44940 https://nvd.nist.gov/vuln/detail/CVE-2024-44942 https://nvd.nist.gov/vuln/detail/CVE-2024-44946 https://nvd.nist.gov/vuln/detail/CVE-2024-44947 https://nvd.nist.gov/vuln/detail/CVE-2024-44961 https://nvd.nist.gov/vuln/detail/CVE-2024-44966 https://nvd.nist.gov/vuln/detail/CVE-2024-44971 openEuler-24.03-LTS bpftool-6.6.0-41.0.0.48.oe2403.aarch64.rpm bpftool-debuginfo-6.6.0-41.0.0.48.oe2403.aarch64.rpm kernel-6.6.0-41.0.0.48.oe2403.aarch64.rpm kernel-debuginfo-6.6.0-41.0.0.48.oe2403.aarch64.rpm kernel-debugsource-6.6.0-41.0.0.48.oe2403.aarch64.rpm kernel-devel-6.6.0-41.0.0.48.oe2403.aarch64.rpm kernel-headers-6.6.0-41.0.0.48.oe2403.aarch64.rpm kernel-source-6.6.0-41.0.0.48.oe2403.aarch64.rpm kernel-tools-6.6.0-41.0.0.48.oe2403.aarch64.rpm kernel-tools-debuginfo-6.6.0-41.0.0.48.oe2403.aarch64.rpm kernel-tools-devel-6.6.0-41.0.0.48.oe2403.aarch64.rpm perf-6.6.0-41.0.0.48.oe2403.aarch64.rpm perf-debuginfo-6.6.0-41.0.0.48.oe2403.aarch64.rpm python3-perf-6.6.0-41.0.0.48.oe2403.aarch64.rpm python3-perf-debuginfo-6.6.0-41.0.0.48.oe2403.aarch64.rpm bpftool-6.6.0-41.0.0.48.oe2403.x86_64.rpm bpftool-debuginfo-6.6.0-41.0.0.48.oe2403.x86_64.rpm kernel-6.6.0-41.0.0.48.oe2403.x86_64.rpm kernel-debuginfo-6.6.0-41.0.0.48.oe2403.x86_64.rpm kernel-debugsource-6.6.0-41.0.0.48.oe2403.x86_64.rpm kernel-devel-6.6.0-41.0.0.48.oe2403.x86_64.rpm kernel-headers-6.6.0-41.0.0.48.oe2403.x86_64.rpm kernel-source-6.6.0-41.0.0.48.oe2403.x86_64.rpm kernel-tools-6.6.0-41.0.0.48.oe2403.x86_64.rpm kernel-tools-debuginfo-6.6.0-41.0.0.48.oe2403.x86_64.rpm kernel-tools-devel-6.6.0-41.0.0.48.oe2403.x86_64.rpm perf-6.6.0-41.0.0.48.oe2403.x86_64.rpm perf-debuginfo-6.6.0-41.0.0.48.oe2403.x86_64.rpm python3-perf-6.6.0-41.0.0.48.oe2403.x86_64.rpm python3-perf-debuginfo-6.6.0-41.0.0.48.oe2403.x86_64.rpm kernel-6.6.0-41.0.0.48.oe2403.src.rpm In the Linux kernel, the following vulnerability has been resolved: bna: ensure the copied buf is NUL terminated Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from userspace to that buffer. Later, we use sscanf on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using sscanf. Fix this issue by using memdup_user_nul instead of memdup_user. 2024-09-14 CVE-2024-36934 openEuler-24.03-LTS Medium 5.1 AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:L kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential kernel bug due to lack of writeback flag waiting Destructive writes to a block device on which nilfs2 is mounted can cause a kernel bug in the folio/page writeback start routine or writeback end routine (__folio_start_writeback in the log below): kernel BUG at mm/page-writeback.c:3070! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI ... RIP: 0010:__folio_start_writeback+0xbaa/0x10e0 Code: 25 ff 0f 00 00 0f 84 18 01 00 00 e8 40 ca c6 ff e9 17 f6 ff ff e8 36 ca c6 ff 4c 89 f7 48 c7 c6 80 c0 12 84 e8 e7 b3 0f 00 90 <0f> 0b e8 1f ca c6 ff 4c 89 f7 48 c7 c6 a0 c6 12 84 e8 d0 b3 0f 00 ... Call Trace: <TASK> nilfs_segctor_do_construct+0x4654/0x69d0 [nilfs2] nilfs_segctor_construct+0x181/0x6b0 [nilfs2] nilfs_segctor_thread+0x548/0x11c0 [nilfs2] kthread+0x2f0/0x390 ret_from_fork+0x4b/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> This is because when the log writer starts a writeback for segment summary blocks or a super root block that use the backing device's page cache, it does not wait for the ongoing folio/page writeback, resulting in an inconsistent writeback state. Fix this issue by waiting for ongoing writebacks when putting folios/pages on the backing device into writeback state. 2024-09-14 CVE-2024-37078 openEuler-24.03-LTS Low 3.3 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:xfrm6: check ip6_dst_idev() return value in xfrm6_get_saddr()ip6_dst_idev() can return NULL, xfrm6_get_saddr() must act accordingly.syzbot reported:Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTIKASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]CPU: 1 PID: 12 Comm: kworker/u8:1 Not tainted 6.10.0-rc2-syzkaller-00383-gb8481381d4e2 #0Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024Workqueue: wg-kex-wg1 wg_packet_handshake_send_worker RIP: 0010:xfrm6_get_saddr+0x93/0x130 net/ipv6/xfrm6_policy.c:64Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 97 00 00 00 4c 8b ab d8 00 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 86 00 00 00 4d 8b 6d 00 e8 ca 13 47 01 48 b8 00RSP: 0018:ffffc90000117378 EFLAGS: 00010246RAX: dffffc0000000000 RBX: ffff88807b079dc0 RCX: ffffffff89a0d6d7RDX: 0000000000000000 RSI: ffffffff89a0d6e9 RDI: ffff88807b079e98RBP: ffff88807ad73248 R08: 0000000000000007 R09: fffffffffffff000R10: ffff88807b079dc0 R11: 0000000000000007 R12: ffffc90000117480R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000FS: 0000000000000000(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 00007f4586d00440 CR3: 0000000079042000 CR4: 00000000003506f0DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400Call Trace: <TASK> xfrm_get_saddr net/xfrm/xfrm_policy.c:2452 [inline] xfrm_tmpl_resolve_one net/xfrm/xfrm_policy.c:2481 [inline] xfrm_tmpl_resolve+0xa26/0xf10 net/xfrm/xfrm_policy.c:2541 xfrm_resolve_and_create_bundle+0x140/0x2570 net/xfrm/xfrm_policy.c:2835 xfrm_bundle_lookup net/xfrm/xfrm_policy.c:3070 [inline] xfrm_lookup_with_ifid+0x4d1/0x1e60 net/xfrm/xfrm_policy.c:3201 xfrm_lookup net/xfrm/xfrm_policy.c:3298 [inline] xfrm_lookup_route+0x3b/0x200 net/xfrm/xfrm_policy.c:3309 ip6_dst_lookup_flow+0x15c/0x1d0 net/ipv6/ip6_output.c:1256 send6+0x611/0xd20 drivers/net/wireguard/socket.c:139 wg_socket_send_skb_to_peer+0xf9/0x220 drivers/net/wireguard/socket.c:178 wg_socket_send_buffer_to_peer+0x12b/0x190 drivers/net/wireguard/socket.c:200 wg_packet_send_handshake_initiation+0x227/0x360 drivers/net/wireguard/send.c:40 wg_packet_handshake_send_worker+0x1c/0x30 drivers/net/wireguard/send.c:51 process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231 process_scheduled_works kernel/workqueue.c:3312 [inline] worker_thread+0x6c8/0xf70 kernel/workqueue.c:3393 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 2024-09-14 CVE-2024-40959 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: drm/lima: mask irqs in timeout path before hard reset There is a race condition in which a rendering job might take just long enough to trigger the drm sched job timeout handler but also still complete before the hard reset is done by the timeout handler. This runs into race conditions not expected by the timeout handler. In some very specific cases it currently may result in a refcount imbalance on lima_pm_idle, with a stack dump such as: [10136.669170] WARNING: CPU: 0 PID: 0 at drivers/gpu/drm/lima/lima_devfreq.c:205 lima_devfreq_record_idle+0xa0/0xb0 ... [10136.669459] pc : lima_devfreq_record_idle+0xa0/0xb0 ... [10136.669628] Call trace: [10136.669634] lima_devfreq_record_idle+0xa0/0xb0 [10136.669646] lima_sched_pipe_task_done+0x5c/0xb0 [10136.669656] lima_gp_irq_handler+0xa8/0x120 [10136.669666] __handle_irq_event_percpu+0x48/0x160 [10136.669679] handle_irq_event+0x4c/0xc0 We can prevent that race condition entirely by masking the irqs at the beginning of the timeout handler, at which point we give up on waiting for that job entirely. The irqs will be enabled again at the next hard reset which is already done as a recovery by the timeout handler. 2024-09-14 CVE-2024-40976 openEuler-24.03-LTS Medium 4.7 AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: scsi: qedi: Fix crash while reading debugfs attribute The qedi_dbg_do_not_recover_cmd_read() function invokes sprintf() directly on a __user pointer, which results into the crash. To fix this issue, use a small local stack buffer for sprintf() and then call simple_read_from_buffer(), which in turns make the copy_to_user() call. BUG: unable to handle page fault for address: 00007f4801111000 PGD 8000000864df6067 P4D 8000000864df6067 PUD 864df7067 PMD 846028067 PTE 0 Oops: 0002 [#1] PREEMPT SMP PTI Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/15/2023 RIP: 0010:memcpy_orig+0xcd/0x130 RSP: 0018:ffffb7a18c3ffc40 EFLAGS: 00010202 RAX: 00007f4801111000 RBX: 00007f4801111000 RCX: 000000000000000f RDX: 000000000000000f RSI: ffffffffc0bfd7a0 RDI: 00007f4801111000 RBP: ffffffffc0bfd7a0 R08: 725f746f6e5f6f64 R09: 3d7265766f636572 R10: ffffb7a18c3ffd08 R11: 0000000000000000 R12: 00007f4881110fff R13: 000000007fffffff R14: ffffb7a18c3ffca0 R15: ffffffffc0bfd7af FS: 00007f480118a740(0000) GS:ffff98e38af00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4801111000 CR3: 0000000864b8e001 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? page_fault_oops+0x183/0x510 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x22/0x30 ? memcpy_orig+0xcd/0x130 vsnprintf+0x102/0x4c0 sprintf+0x51/0x80 qedi_dbg_do_not_recover_cmd_read+0x2f/0x50 [qedi 6bcfdeeecdea037da47069eca2ba717c84a77324] full_proxy_read+0x50/0x80 vfs_read+0xa5/0x2e0 ? folio_add_new_anon_rmap+0x44/0xa0 ? set_pte_at+0x15/0x30 ? do_pte_missing+0x426/0x7f0 ksys_read+0xa5/0xe0 do_syscall_64+0x58/0x80 ? __count_memcg_events+0x46/0x90 ? count_memcg_event_mm+0x3d/0x60 ? handle_mm_fault+0x196/0x2f0 ? do_user_addr_fault+0x267/0x890 ? exc_page_fault+0x69/0x150 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f4800f20b4d 2024-09-14 CVE-2024-40978 openEuler-24.03-LTS Medium 4.4 AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: filelock: Remove locks reliably when fcntl/close race is detected When fcntl_setlk() races with close(), it removes the created lock with do_lock_file_wait(). However, LSMs can allow the first do_lock_file_wait() that created the lock while denying the second do_lock_file_wait() that tries to remove the lock. Separately, posix_lock_file() could also fail to remove a lock due to GFP_KERNEL allocation failure (when splitting a range in the middle). After the bug has been triggered, use-after-free reads will occur in lock_get_status() when userspace reads /proc/locks. This can likely be used to read arbitrary kernel memory, but can't corrupt kernel memory. Fix it by calling locks_remove_posix() instead, which is designed to reliably get rid of POSIX locks associated with the given file and files_struct and is also used by filp_flush(). 2024-09-14 CVE-2024-41012 openEuler-24.03-LTS Medium 6.3 AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: ocfs2: strict bound check before memcmp in ocfs2_xattr_find_entry() xattr in ocfs2 maybe 'non-indexed', which saved with additional space requested. It's better to check if the memory is out of bound before memcmp, although this possibility mainly comes from crafted poisonous images. 2024-09-14 CVE-2024-41016 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:N kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:ASoC: SOF: Intel: hda: fix null deref on system suspend entryWhen system enters suspend with an active stream, SOF corecalls hw_params_upon_resume(). On Intel platforms with HDA DMA usedto manage the link DMA, this leads to call chain of hda_dsp_set_hw_params_upon_resume() -> hda_dsp_dais_suspend() -> hda_dai_suspend() -> hda_ipc4_post_trigger()A bug is hit in hda_dai_suspend() as hda_link_dma_cleanup() is run first,which clears hext_stream->link_substream, and then hda_ipc4_post_trigger()is called with a NULL snd_pcm_substream pointer. 2024-09-14 CVE-2024-41037 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Init the count variable in collecting hot-reset devices The count variable is used without initialization, it results in mistakes in the device counting and crashes the userspace if the get hot reset info path is triggered. 2024-09-14 CVE-2024-41052 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211: Avoid address calculations via out of bounds array indexingreq->n_channels must be set before req->channels[] can be used.This patch fixes one of the issues encountered in [1].[ 83.964255] UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:364:4[ 83.964258] index 0 is out of range for type struct ieee80211_channel *[] [...][ 83.964264] Call Trace:[ 83.964267] <TASK>[ 83.964269] dump_stack_lvl+0x3f/0xc0[ 83.964274] __ubsan_handle_out_of_bounds+0xec/0x110[ 83.964278] ieee80211_prep_hw_scan+0x2db/0x4b0[ 83.964281] __ieee80211_start_scan+0x601/0x990[ 83.964291] nl80211_trigger_scan+0x874/0x980[ 83.964295] genl_family_rcv_msg_doit+0xe8/0x160[ 83.964298] genl_rcv_msg+0x240/0x270[...][1] https://bugzilla.kernel.org/show_bug.cgi?id=218810 2024-09-14 CVE-2024-41071 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: nvme-fabrics: use reserved tag for reg read/write command In some scenarios, if too many commands are issued by nvme command in the same time by user tasks, this may exhaust all tags of admin_q. If a reset (nvme reset or IO timeout) occurs before these commands finish, reconnect routine may fail to update nvme regs due to insufficient tags, which will cause kernel hang forever. In order to workaround this issue, maybe we can let reg_read32()/reg_read64()/reg_write32() use reserved tags. This maybe safe for nvmf: 1. For the disable ctrl path, we will not issue connect command 2. For the enable ctrl / fw activate path, since connect and reg_xx() are called serially. So the reserved tags may still be enough while reg_xx() use reserved tags. 2024-09-14 CVE-2024-41082 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Fix null pointer dereference on error If the ata_port_alloc() call in ata_host_alloc() fails, ata_host_release() will get called. However, the code in ata_host_release() tries to free ata_port struct members unconditionally, which can lead to the following: BUG: unable to handle page fault for address: 0000000000003990 PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 10 PID: 594 Comm: (udev-worker) Not tainted 6.10.0-rc5 #44 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:ata_host_release.cold+0x2f/0x6e [libata] Code: e4 4d 63 f4 44 89 e2 48 c7 c6 90 ad 32 c0 48 c7 c7 d0 70 33 c0 49 83 c6 0e 41 RSP: 0018:ffffc90000ebb968 EFLAGS: 00010246 RAX: 0000000000000041 RBX: ffff88810fb52e78 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88813b3218c0 RDI: ffff88813b3218c0 RBP: ffff88810fb52e40 R08: 0000000000000000 R09: 6c65725f74736f68 R10: ffffc90000ebb738 R11: 73692033203a746e R12: 0000000000000004 R13: 0000000000000000 R14: 0000000000000011 R15: 0000000000000006 FS: 00007f6cc55b9980(0000) GS:ffff88813b300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000003990 CR3: 00000001122a2000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? page_fault_oops+0x15a/0x2f0 ? exc_page_fault+0x7e/0x180 ? asm_exc_page_fault+0x26/0x30 ? ata_host_release.cold+0x2f/0x6e [libata] ? ata_host_release.cold+0x2f/0x6e [libata] release_nodes+0x35/0xb0 devres_release_group+0x113/0x140 ata_host_alloc+0xed/0x120 [libata] ata_host_alloc_pinfo+0x14/0xa0 [libata] ahci_init_one+0x6c9/0xd20 [ahci] Do not access ata_port struct members unconditionally. 2024-09-14 CVE-2024-41098 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: ice: Fix improper extts handling Extts events are disabled and enabled by the application ts2phc. However, in case where the driver is removed when the application is running, a specific extts event remains enabled and can cause a kernel crash. As a side effect, when the driver is reloaded and application is started again, remaining extts event for the channel from a previous run will keep firing and the message "extts on unexpected channel" might be printed to the user. To avoid that, extts events shall be disabled when PTP is released. 2024-09-14 CVE-2024-42139 openEuler-24.03-LTS Medium 4.4 AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: nvmet: fix a possible leak when destroy a ctrl during qp establishment In nvmet_sq_destroy we capture sq->ctrl early and if it is non-NULL we know that a ctrl was allocated (in the admin connect request handler) and we need to release pending AERs, clear ctrl->sqs and sq->ctrl (for nvme-loop primarily), and drop the final reference on the ctrl. However, a small window is possible where nvmet_sq_destroy starts (as a result of the client giving up and disconnecting) concurrently with the nvme admin connect cmd (which may be in an early stage). But *before* kill_and_confirm of sq->ref (i.e. the admin connect managed to get an sq live reference). In this case, sq->ctrl was allocated however after it was captured in a local variable in nvmet_sq_destroy. This prevented the final reference drop on the ctrl. Solve this by re-capturing the sq->ctrl after all inflight request has completed, where for sure sq->ctrl reference is final, and move forward based on that. This issue was observed in an environment with many hosts connecting multiple ctrls simoutanuosly, creating a delay in allocating a ctrl leading up to this race window. 2024-09-14 CVE-2024-42152 openEuler-24.03-LTS Medium 4.7 AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isrWhen del_timer_sync() is called in an interrupt context it throws a warningbecause of potential deadlock. The timer is used only to exit fromwait_for_completion() after a timeout so replacing the call withwait_for_completion_timeout() allows to remove the problematic timer andits related functions altogether. 2024-09-14 CVE-2024-42153 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:mm: fix crashes from deferred split racing folio migrationEven on 6.10-rc6, I ve been seeing elusive Bad page state s (often onflags when freeing, yet the flags shown are not bad: PG_locked had beenset and cleared??), and VM_BUG_ON_PAGE(page_ref_count(page) == 0)s fromdeferred_split_scan() s folio_put(), and a variety of other BUG and WARNsymptoms implying double free by deferred split and large folio migration.6.7 commit 9bcef5973e31 ( mm: memcg: fix split queue list crash when largefolio migration ) was right to fix the memcg-dependent locking broken in85ce2c517ade ( memcontrol: only transfer the memcg data for migration ),but missed a subtlety of deferred_split_scan(): it moves folios to its ownlocal list to work on them without split_queue_lock, during which timefolio->_deferred_list is not empty, but even the right lock does nothingto secure the folio and the list it is on.Fortunately, deferred_split_scan() is careful to use folio_try_get(): sofolio_migrate_mapping() can avoid the race by folio_undo_large_rmappable()while the old folio s reference count is temporarily frozen to 0 - addingsuch a freeze in the !mapping case too (originally, folio lock andunmapping and no swap cache left an anon folio unreachable, so no freezingwas needed there: but the deferred split queue offers a way to reach it). 2024-09-14 CVE-2024-42234 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: s390/mm: Add NULL pointer check to crst_table_free() base_crst_free() crst_table_free() used to work with NULL pointers before the conversion to ptdescs. Since crst_table_free() can be called with a NULL pointer (error handling in crst_table_upgrade() add an explicit check. Also add the same check to base_crst_free() for consistency reasons. In real life this should not happen, since order two GFP_KERNEL allocations will not fail, unless FAIL_PAGE_ALLOC is enabled and used. 2024-09-14 CVE-2024-42235 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:firmware: cs_dsp: Validate payload length before processing blockMove the payload length check in cs_dsp_load() and cs_dsp_coeff_load()to be done before the block is processed.The check that the length of a block payload does not exceed the numberof remaining bytes in the firwmware file buffer was being done near theend of the loop iteration. However, some code before that check used thelength field without validating it. 2024-09-14 CVE-2024-42237 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:firmware: cs_dsp: Return error if block header overflows fileReturn an error from cs_dsp_power_up() if a block header is longerthan the amount of data left in the file.The previous code in cs_dsp_load() and cs_dsp_load_coeff() would loopwhile there was enough data left in the file for a valid region. Thisprotected against overrunning the end of the file data, but it didn tabort the file processing with an error. 2024-09-14 CVE-2024-42238 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:bpf: Fail bpf_timer_cancel when callback is being cancelledGiven a schedule:timer1 cb timer2 cbbpf_timer_cancel(timer2); bpf_timer_cancel(timer1);Both bpf_timer_cancel calls would wait for the other callback to finishexecuting, introducing a lockup.Add an atomic_t count named cancelling in bpf_hrtimer. This keepstrack of all in-flight cancellation requests for a given BPF timer.Whenever cancelling a BPF timer, we must check if we have outstandingcancellation requests, and if so, we must fail the operation with anerror (-EDEADLK) since cancellation is synchronous and waits for thecallback to finish executing. This implies that we can enter a deadlocksituation involving two or more timer callbacks executing in paralleland attempting to cancel one another.Note that we avoid incrementing the cancelling counter for the targettimer (the one being cancelled) if bpf_timer_cancel is not invoked froma callback, to avoid spurious errors. The whole point of detectingcur->cancelling and returning -EDEADLK is to not enter a busy wait loop(which may or may not lead to a lockup). This does not apply in case thecaller is in a non-callback context, the other side can continue tocancel as it sees fit without running into errors.Background on prior attempts:Earlier versions of this patch used a bool cancelling bit and used thefollowing pattern under timer->lock to publish cancellation status.lock(t->lock);t->cancelling = true;mb();if (cur->cancelling) return -EDEADLK;unlock(t->lock);hrtimer_cancel(t->timer);t->cancelling = false;The store outside the critical section could overwrite a parallelrequests t->cancelling assignment to true, to ensure the parallelyexecuting callback observes its cancellation status.It would be necessary to clear this cancelling bit once hrtimer_cancelis done, but lack of serialization introduced races. Another option wasexplored where bpf_timer_start would clear the bit when (re)starting thetimer under timer->lock. This would ensure serialized access to thecancelling bit, but may allow it to be cleared before in-flighthrtimer_cancel has finished executing, such that lockups can occuragain.Thus, we choose an atomic counter to keep track of all outstandingcancellation requests and use it to prevent lockups in case callbacksattempt to cancel each other while executing in parallel. 2024-09-14 CVE-2024-42239 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:x86/bhi: Avoid warning in #DB handler due to BHI mitigationWhen BHI mitigation is enabled, if SYSENTER is invoked with the TF flag setthen entry_SYSENTER_compat() uses CLEAR_BRANCH_HISTORY and calls theclear_bhb_loop() before the TF flag is cleared. This causes the #DB handler(exc_debug_kernel()) to issue a warning because single-step is used outside theentry_SYSENTER_compat() function.To address this issue, entry_SYSENTER_compat() should use CLEAR_BRANCH_HISTORYafter making sure the TF flag is cleared.The problem can be reproduced with the following sequence: $ cat sysenter_step.c int main() { asm( pushf; pop %ax; bts $8,%ax; push %ax; popf; sysenter ); } $ gcc -o sysenter_step sysenter_step.c $ ./sysenter_step Segmentation fault (core dumped)The program is expected to crash, and the #DB handler will issue a warning.Kernel log: WARNING: CPU: 27 PID: 7000 at arch/x86/kernel/traps.c:1009 exc_debug_kernel+0xd2/0x160 ... RIP: 0010:exc_debug_kernel+0xd2/0x160 ... Call Trace: <#DB> ? show_regs+0x68/0x80 ? __warn+0x8c/0x140 ? exc_debug_kernel+0xd2/0x160 ? report_bug+0x175/0x1a0 ? handle_bug+0x44/0x90 ? exc_invalid_op+0x1c/0x70 ? asm_exc_invalid_op+0x1f/0x30 ? exc_debug_kernel+0xd2/0x160 exc_debug+0x43/0x50 asm_exc_debug+0x1e/0x40 RIP: 0010:clear_bhb_loop+0x0/0xb0 ... </#DB> <TASK> ? entry_SYSENTER_compat_after_hwframe+0x6e/0x8d </TASK> [ bp: Massage commit message. ] 2024-09-14 CVE-2024-42240 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:mm/shmem: disable PMD-sized page cache if neededFor shmem files, it s possible that PMD-sized page cache can t besupported by xarray. For example, 512MB page cache on ARM64 when the basepage size is 64KB can t be supported by xarray. It leads to errors as thefollowing messages indicate when this sort of xarray entry is split.WARNING: CPU: 34 PID: 7578 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128Modules linked in: binfmt_misc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm fuse xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce virtio_net net_failover virtio_console virtio_blk failover dimlib virtio_mmioCPU: 34 PID: 7578 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #9Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)pc : xas_split_alloc+0xf8/0x128lr : split_huge_page_to_list_to_order+0x1c4/0x720sp : ffff8000882af5f0x29: ffff8000882af5f0 x28: ffff8000882af650 x27: ffff8000882af768x26: 0000000000000cc0 x25: 000000000000000d x24: ffff00010625b858x23: ffff8000882af650 x22: ffffffdfc0900000 x21: 0000000000000000x20: 0000000000000000 x19: ffffffdfc0900000 x18: 0000000000000000x17: 0000000000000000 x16: 0000018000000000 x15: 52f8004000000000x14: 0000e00000000000 x13: 0000000000002000 x12: 0000000000000020x11: 52f8000000000000 x10: 52f8e1c0ffff6000 x9 : ffffbeb9619a681cx8 : 0000000000000003 x7 : 0000000000000000 x6 : ffff00010b02ddb0x5 : ffffbeb96395e378 x4 : 0000000000000000 x3 : 0000000000000cc0x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000Call trace: xas_split_alloc+0xf8/0x128 split_huge_page_to_list_to_order+0x1c4/0x720 truncate_inode_partial_folio+0xdc/0x160 shmem_undo_range+0x2bc/0x6a8 shmem_fallocate+0x134/0x430 vfs_fallocate+0x124/0x2e8 ksys_fallocate+0x4c/0xa0 __arm64_sys_fallocate+0x24/0x38 invoke_syscall.constprop.0+0x7c/0xd8 do_el0_svc+0xb4/0xd0 el0_svc+0x44/0x1d8 el0t_64_sync_handler+0x134/0x150 el0t_64_sync+0x17c/0x180Fix it by disabling PMD-sized page cache when HPAGE_PMD_ORDER is largerthan MAX_PAGECACHE_ORDER. As Matthew Wilcox pointed, the page cache in ashmem file isn t represented by a multi-index entry and doesn t have thislimitation when the xarry entry is split until commit 6b24ca4a1a8d ( mm:Use multi-index entries in the page cache ). 2024-09-14 CVE-2024-42241 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarrayPatch series mm/filemap: Limit page cache size to that supported byxarray , v2.Currently, xarray can t support arbitrary page cache size. More detailscan be found from the WARN_ON() statement in xas_split_alloc(). In ourtest whose code is attached below, we hit the WARN_ON() on ARM64 systemwhere the base page size is 64KB and huge page size is 512MB. The issuewas reported long time ago and some discussions on it can be found here[1].[1] https://www.spinics.net/lists/linux-xfs/msg75404.htmlIn order to fix the issue, we need to adjust MAX_PAGECACHE_ORDER to onesupported by xarray and avoid PMD-sized page cache if needed. The codechanges are suggested by David Hildenbrand.PATCH[1] adjusts MAX_PAGECACHE_ORDER to that supported by xarrayPATCH[2-3] avoids PMD-sized page cache in the synchronous readahead pathPATCH[4] avoids PMD-sized page cache for shmem files if neededTest program============# cat test.c#define _GNU_SOURCE#include <stdio.h>#include <stdlib.h>#include <unistd.h>#include <string.h>#include <fcntl.h>#include <errno.h>#include <sys/syscall.h>#include <sys/mman.h>#define TEST_XFS_FILENAME /tmp/data #define TEST_SHMEM_FILENAME /dev/shm/data #define TEST_MEM_SIZE 0x20000000int main(int argc, char **argv){ const char *filename; int fd = 0; void *buf = (void *)-1, *p; int pgsize = getpagesize(); int ret; if (pgsize != 0x10000) { fprintf(stderr, 64KB base page size is required n ); return -EPERM; } system( echo force > /sys/kernel/mm/transparent_hugepage/shmem_enabled ); system( rm -fr /tmp/data ); system( rm -fr /dev/shm/data ); system( echo 1 > /proc/sys/vm/drop_caches ); /* Open xfs or shmem file */ filename = TEST_XFS_FILENAME; if (argc > 1 && !strcmp(argv[1], shmem )) filename = TEST_SHMEM_FILENAME; fd = open(filename, O_CREAT | O_RDWR | O_TRUNC); if (fd < 0) { fprintf(stderr, Unable to open <%s> n , filename); return -EIO; } /* Extend file size */ ret = ftruncate(fd, TEST_MEM_SIZE); if (ret) { fprintf(stderr, Error %d to ftruncate() n , ret); goto cleanup; } /* Create VMA */ buf = mmap(NULL, TEST_MEM_SIZE, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); if (buf == (void *)-1) { fprintf(stderr, Unable to mmap <%s> n , filename); goto cleanup; } fprintf(stdout, mapped buffer at 0x%p n , buf); ret = madvise(buf, TEST_MEM_SIZE, MADV_HUGEPAGE); if (ret) { fprintf(stderr, Unable to madvise(MADV_HUGEPAGE) n ); goto cleanup; } /* Populate VMA */ ret = madvise(buf, TEST_MEM_SIZE, MADV_POPULATE_WRITE); if (ret) { fprintf(stderr, Error %d to madvise(MADV_POPULATE_WRITE) n , ret); goto cleanup; } /* Punch the file to enforce xarray split */ ret = fallocate(fd, FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE, TEST_MEM_SIZE - pgsize, pgsize); if (ret) fprintf(stderr, Error %d to fallocate() n , ret);cleanup: if (buf != (void *)-1) munmap(buf, TEST_MEM_SIZE); if (fd > 0) close(fd); return 0;}# gcc test.c -o test# cat /proc/1/smaps | grep KernelPageSize | head -n 1KernelPageSize: 64 kB# ./test shmem :------------[ cut here ]------------WARNING: CPU: 17 PID: 5253 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables rfkill nfnetlink vfat fat virtio_balloon drm fuse xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 virtio_net sha1_ce net_failover failover virtio_console virtio_blk dimlib virtio_mmioCPU: 17 PID: 5253 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #12Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024pstate: 83400005 (Nzcv daif +PAN -UAO +TC---truncated--- 2024-09-14 CVE-2024-42243 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:tty: serial: ma35d1: Add a NULL check for of_nodeThe pdev->dev.of_node can be NULL if the serial node is absent.Add a NULL check to return an error in such cases. 2024-09-14 CVE-2024-42248 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:cachefiles: add missing lock protection when pollingAdd missing lock protection in poll routine when iterating xarray,otherwise:Even with RCU read lock held, only the slot of the radix tree isensured to be pinned there, while the data structure (e.g. structcachefiles_req) stored in the slot has no such guarantee. The pollroutine will iterate the radix tree and dereference cachefiles_reqaccordingly. Thus RCU read lock is not adequate in this case andspinlock is needed here. 2024-09-14 CVE-2024-42250 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:gpio: pca953x: fix pca953x_irq_bus_sync_unlock raceEnsure that `i2c_lock is held when setting interrupt latch and mask inpca953x_irq_bus_sync_unlock() in order to avoid races.The other (non-probe) call site pca953x_gpio_set_multiple() ensures thelock is held before calling pca953x_write_regs().The problem occurred when a request raced against irq_bus_sync_unlock()approximately once per thousand reboots on an i.MX8MP based system. * Normal case 0-0022: write register AI|3a {03,02,00,00,01} Input latch P0 0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0 0-0022: write register AI|08 {ff,00,00,00,00} Output P3 0-0022: write register AI|12 {fc,00,00,00,00} Config P3 * Race case 0-0022: write register AI|08 {ff,00,00,00,00} Output P3 0-0022: write register AI|08 {03,02,00,00,01} *** Wrong register *** 0-0022: write register AI|12 {fc,00,00,00,00} Config P3 0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0 2024-09-14 CVE-2024-42253 openEuler-24.03-LTS Medium 4.4 AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:mm: huge_memory: use !CONFIG_64BIT to relax huge page alignment on 32 bit machinesYves-Alexis Perez reported commit 4ef9ad19e176 ( mm: huge_memory: don tforce huge page alignment on 32 bit ) didn t work for x86_32 [1]. It isbecause x86_32 uses CONFIG_X86_32 instead of CONFIG_32BIT.!CONFIG_64BIT should cover all 32 bit machines.[1] https://lore.kernel.org/linux-mm/CAHbLzkr1LwH3pcTgM+aGQ31ip2bKqiqEQ8=FQB+t2c3dhNKNHA@mail.gmail.com/ 2024-09-14 CVE-2024-42258 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Fix Virtual Memory mapping boundaries calculation Calculating the size of the mapped area as the lesser value between the requested size and the actual size does not consider the partial mapping offset. This can cause page fault access. Fix the calculation of the starting and ending addresses, the total size is now deduced from the difference between the end and start addresses. Additionally, the calculations have been rewritten in a clearer and more understandable form. [Joonas: Add Requires: tag] Requires: 60a2066c5005 ("drm/i915/gem: Adjust vma offset for framebuffer mmap offset") (cherry picked from commit 97b6784753da06d9d40232328efc5c5367e53417) 2024-09-14 CVE-2024-42259 openEuler-24.03-LTS Medium 6.1 AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:net/iucv: fix use after free in iucv_sock_close()iucv_sever_path() is called from process context and from bh context.iucv->path is used as indicator whether somebody else is taking care ofsevering the path (or it is already removed / never existed).This needs to be done with atomic compare and swap, otherwise there is asmall window where iucv_sock_close() will try to work with a path that hasalready been severed and freed by iucv_callback_connrej() called byiucv_tasklet_fn().Example:[452744.123844] Call Trace:[452744.123845] ([<0000001e87f03880>] 0x1e87f03880)[452744.123966] [<00000000d593001e>] iucv_path_sever+0x96/0x138[452744.124330] [<000003ff801ddbca>] iucv_sever_path+0xc2/0xd0 [af_iucv][452744.124336] [<000003ff801e01b6>] iucv_sock_close+0xa6/0x310 [af_iucv][452744.124341] [<000003ff801e08cc>] iucv_sock_release+0x3c/0xd0 [af_iucv][452744.124345] [<00000000d574794e>] __sock_release+0x5e/0xe8[452744.124815] [<00000000d5747a0c>] sock_close+0x34/0x48[452744.124820] [<00000000d5421642>] __fput+0xba/0x268[452744.124826] [<00000000d51b382c>] task_work_run+0xbc/0xf0[452744.124832] [<00000000d5145710>] do_notify_resume+0x88/0x90[452744.124841] [<00000000d5978096>] system_call+0xe2/0x2c8[452744.125319] Last Breaking-Event-Address:[452744.125321] [<00000000d5930018>] iucv_path_sever+0x90/0x138[452744.125324][452744.125325] Kernel panic - not syncing: Fatal exception in interruptNote that bh_lock_sock() is not serializing the tasklet context againstprocess context, because the check for sock_owned_by_user() andcorresponding handling is missing.Ideas for a future clean-up patch:A) Correct usage of bh_lock_sock() in tasklet context, as described inRe-enqueue, if needed. This may require adding return values to thetasklet functions and thus changes to all users of iucv.B) Change iucv tasklet into worker and use only lock_sock() in af_iucv. 2024-09-14 CVE-2024-42271 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: sched: act_ct: take care of padding in struct zones_ht_key Blamed commit increased lookup key size from 2 bytes to 16 bytes, because zones_ht_key got a struct net pointer. Make sure rhashtable_lookup() is not using the padding bytes which are not initialized. BUG: KMSAN: uninit-value in rht_ptr_rcu include/linux/rhashtable.h:376 [inline] BUG: KMSAN: uninit-value in __rhashtable_lookup include/linux/rhashtable.h:607 [inline] BUG: KMSAN: uninit-value in rhashtable_lookup include/linux/rhashtable.h:646 [inline] BUG: KMSAN: uninit-value in rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline] BUG: KMSAN: uninit-value in tcf_ct_flow_table_get+0x611/0x2260 net/sched/act_ct.c:329 rht_ptr_rcu include/linux/rhashtable.h:376 [inline] __rhashtable_lookup include/linux/rhashtable.h:607 [inline] rhashtable_lookup include/linux/rhashtable.h:646 [inline] rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline] tcf_ct_flow_table_get+0x611/0x2260 net/sched/act_ct.c:329 tcf_ct_init+0xa67/0x2890 net/sched/act_ct.c:1408 tcf_action_init_1+0x6cc/0xb30 net/sched/act_api.c:1425 tcf_action_init+0x458/0xf00 net/sched/act_api.c:1488 tcf_action_add net/sched/act_api.c:2061 [inline] tc_ctl_action+0x4be/0x19d0 net/sched/act_api.c:2118 rtnetlink_rcv_msg+0x12fc/0x1410 net/core/rtnetlink.c:6647 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2550 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6665 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2597 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2651 __sys_sendmsg net/socket.c:2680 [inline] __do_sys_sendmsg net/socket.c:2689 [inline] __se_sys_sendmsg net/socket.c:2687 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2687 x64_sys_call+0x2dd6/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable key created at: tcf_ct_flow_table_get+0x4a/0x2260 net/sched/act_ct.c:324 tcf_ct_init+0xa67/0x2890 net/sched/act_ct.c:1408 2024-09-14 CVE-2024-42272 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: nvme-pci: add missing condition check for existence of mapped data nvme_map_data() is called when request has physical segments, hence the nvme_unmap_data() should have same condition to avoid dereference. 2024-09-14 CVE-2024-42276 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: iommu: sprd: Avoid NULL deref in sprd_iommu_hw_en In sprd_iommu_cleanup() before calling function sprd_iommu_hw_en() dom->sdev is equal to NULL, which leads to null dereference. Found by Linux Verification Center (linuxtesting.org) with SVACE. 2024-09-14 CVE-2024-42277 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: spi: microchip-core: ensure TX and RX FIFOs are empty at start of a transfer While transmitting with rx_len == 0, the RX FIFO is not going to be emptied in the interrupt handler. A subsequent transfer could then read crap from the previous transfer out of the RX FIFO into the start RX buffer. The core provides a register that will empty the RX and TX FIFOs, so do that before each transfer. 2024-09-14 CVE-2024-42279 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: ice: Add a per-VF limit on number of FDIR filters While the iavf driver adds a s/w limit (128) on the number of FDIR filters that the VF can request, a malicious VF driver can request more than that and exhaust the resources for other VFs. Add a similar limit in ice. 2024-09-14 CVE-2024-42291 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: block: fix deadlock between sd_remove & sd_release Our test report the following hung task: [ 2538.459400] INFO: task "kworker/0:0":7 blocked for more than 188 seconds. [ 2538.459427] Call trace: [ 2538.459430] __switch_to+0x174/0x338 [ 2538.459436] __schedule+0x628/0x9c4 [ 2538.459442] schedule+0x7c/0xe8 [ 2538.459447] schedule_preempt_disabled+0x24/0x40 [ 2538.459453] __mutex_lock+0x3ec/0xf04 [ 2538.459456] __mutex_lock_slowpath+0x14/0x24 [ 2538.459459] mutex_lock+0x30/0xd8 [ 2538.459462] del_gendisk+0xdc/0x350 [ 2538.459466] sd_remove+0x30/0x60 [ 2538.459470] device_release_driver_internal+0x1c4/0x2c4 [ 2538.459474] device_release_driver+0x18/0x28 [ 2538.459478] bus_remove_device+0x15c/0x174 [ 2538.459483] device_del+0x1d0/0x358 [ 2538.459488] __scsi_remove_device+0xa8/0x198 [ 2538.459493] scsi_forget_host+0x50/0x70 [ 2538.459497] scsi_remove_host+0x80/0x180 [ 2538.459502] usb_stor_disconnect+0x68/0xf4 [ 2538.459506] usb_unbind_interface+0xd4/0x280 [ 2538.459510] device_release_driver_internal+0x1c4/0x2c4 [ 2538.459514] device_release_driver+0x18/0x28 [ 2538.459518] bus_remove_device+0x15c/0x174 [ 2538.459523] device_del+0x1d0/0x358 [ 2538.459528] usb_disable_device+0x84/0x194 [ 2538.459532] usb_disconnect+0xec/0x300 [ 2538.459537] hub_event+0xb80/0x1870 [ 2538.459541] process_scheduled_works+0x248/0x4dc [ 2538.459545] worker_thread+0x244/0x334 [ 2538.459549] kthread+0x114/0x1bc [ 2538.461001] INFO: task "fsck.":15415 blocked for more than 188 seconds. [ 2538.461014] Call trace: [ 2538.461016] __switch_to+0x174/0x338 [ 2538.461021] __schedule+0x628/0x9c4 [ 2538.461025] schedule+0x7c/0xe8 [ 2538.461030] blk_queue_enter+0xc4/0x160 [ 2538.461034] blk_mq_alloc_request+0x120/0x1d4 [ 2538.461037] scsi_execute_cmd+0x7c/0x23c [ 2538.461040] ioctl_internal_command+0x5c/0x164 [ 2538.461046] scsi_set_medium_removal+0x5c/0xb0 [ 2538.461051] sd_release+0x50/0x94 [ 2538.461054] blkdev_put+0x190/0x28c [ 2538.461058] blkdev_release+0x28/0x40 [ 2538.461063] __fput+0xf8/0x2a8 [ 2538.461066] __fput_sync+0x28/0x5c [ 2538.461070] __arm64_sys_close+0x84/0xe8 [ 2538.461073] invoke_syscall+0x58/0x114 [ 2538.461078] el0_svc_common+0xac/0xe0 [ 2538.461082] do_el0_svc+0x1c/0x28 [ 2538.461087] el0_svc+0x38/0x68 [ 2538.461090] el0t_64_sync_handler+0x68/0xbc [ 2538.461093] el0t_64_sync+0x1a8/0x1ac T1: T2: sd_remove del_gendisk __blk_mark_disk_dead blk_freeze_queue_start ++q->mq_freeze_depth bdev_release mutex_lock(&disk->open_mutex) sd_release scsi_execute_cmd blk_queue_enter wait_event(!q->mq_freeze_depth) mutex_lock(&disk->open_mutex) SCSI does not set GD_OWNS_QUEUE, so QUEUE_FLAG_DYING is not set in this scenario. This is a classic ABBA deadlock. To fix the deadlock, make sure we don't try to acquire disk->open_mutex after freezing the queue. 2024-09-14 CVE-2024-42294 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: f2fs: fix return value of f2fs_convert_inline_inode() If device is readonly, make f2fs_convert_inline_inode() return EROFS instead of zero, otherwise it may trigger panic during writeback of inline inode's dirty page as below: f2fs_write_single_data_page+0xbb6/0x1e90 fs/f2fs/data.c:2888 f2fs_write_cache_pages fs/f2fs/data.c:3187 [inline] __f2fs_write_data_pages fs/f2fs/data.c:3342 [inline] f2fs_write_data_pages+0x1efe/0x3a90 fs/f2fs/data.c:3369 do_writepages+0x359/0x870 mm/page-writeback.c:2634 filemap_fdatawrite_wbc+0x125/0x180 mm/filemap.c:397 __filemap_fdatawrite_range mm/filemap.c:430 [inline] file_write_and_wait_range+0x1aa/0x290 mm/filemap.c:788 f2fs_do_sync_file+0x68a/0x1ae0 fs/f2fs/file.c:276 generic_write_sync include/linux/fs.h:2806 [inline] f2fs_file_write_iter+0x7bd/0x24e0 fs/f2fs/file.c:4977 call_write_iter include/linux/fs.h:2114 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xa72/0xc90 fs/read_write.c:590 ksys_write+0x1a0/0x2c0 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f 2024-09-14 CVE-2024-42296 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl: fsl_qmc_audio: Check devm_kasprintf() returned value devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fix this lack and check the returned value. 2024-09-14 CVE-2024-42298 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: media: imx-pxp: Fix ERR_PTR dereference in pxp_probe() devm_regmap_init_mmio() can fail, add a check and bail out in case of error. 2024-09-14 CVE-2024-42303 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: cifs: fix potential null pointer use in destroy_workqueue in init_cifs error path Dan Carpenter reported a Smack static checker warning: fs/smb/client/cifsfs.c:1981 init_cifs() error: we previously assumed 'serverclose_wq' could be null (see line 1895) The patch which introduced the serverclose workqueue used the wrong oredering in error paths in init_cifs() for freeing it on errors. 2024-09-14 CVE-2024-42307 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: btrfs: fix extent map use-after-free when adding pages to compressed bio At add_ra_bio_pages() we are accessing the extent map to calculate 'add_size' after we dropped our reference on the extent map, resulting in a use-after-free. Fix this by computing 'add_size' before dropping our extent map reference. 2024-09-14 CVE-2024-42314 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: exfat: fix potential deadlock on __exfat_get_dentry_set When accessing a file with more entries than ES_MAX_ENTRY_NUM, the bh-array is allocated in __exfat_get_entry_set. The problem is that the bh-array is allocated with GFP_KERNEL. It does not make sense. In the following cases, a deadlock for sbi->s_lock between the two processes may occur. CPU0 CPU1 ---- ---- kswapd balance_pgdat lock(fs_reclaim) exfat_iterate lock(&sbi->s_lock) exfat_readdir exfat_get_uniname_from_ext_entry exfat_get_dentry_set __exfat_get_dentry_set kmalloc_array ... lock(fs_reclaim) ... evict exfat_evict_inode lock(&sbi->s_lock) To fix this, let's allocate bh-array with GFP_NOFS. 2024-09-14 CVE-2024-42315 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: mm/mglru: fix div-by-zero in vmpressure_calc_level() evict_folios() uses a second pass to reclaim folios that have gone through page writeback and become clean before it finishes the first pass, since folio_rotate_reclaimable() cannot handle those folios due to the isolation. The second pass tries to avoid potential double counting by deducting scan_control->nr_scanned. However, this can result in underflow of nr_scanned, under a condition where shrink_folio_list() does not increment nr_scanned, i.e., when folio_trylock() fails. The underflow can cause the divisor, i.e., scale=scanned+reclaimed in vmpressure_calc_level(), to become zero, resulting in the following crash: [exception RIP: vmpressure_work_fn+101] process_one_work at ffffffffa3313f2b Since scan_control->nr_scanned has no established semantics, the potential double counting has minimal risks. Therefore, fix the problem by not deducting scan_control->nr_scanned in evict_folios(). 2024-09-14 CVE-2024-42316 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: avoid PMD-size page cache if needed xarray can't support arbitrary page cache size. the largest and supported page cache size is defined as MAX_PAGECACHE_ORDER by commit 099d90642a71 ("mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray"). However, it's possible to have 512MB page cache in the huge memory's collapsing path on ARM64 system whose base page size is 64KB. 512MB page cache is breaking the limitation and a warning is raised when the xarray entry is split as shown in the following example. [root@dhcp-10-26-1-207 ~]# cat /proc/1/smaps | grep KernelPageSize KernelPageSize: 64 kB [root@dhcp-10-26-1-207 ~]# cat /tmp/test.c : int main(int argc, char **argv) { const char *filename = TEST_XFS_FILENAME; int fd = 0; void *buf = (void *)-1, *p; int pgsize = getpagesize(); int ret = 0; if (pgsize != 0x10000) { fprintf(stdout, "System with 64KB base page size is required!\n"); return -EPERM; } system("echo 0 > /sys/devices/virtual/bdi/253:0/read_ahead_kb"); system("echo 1 > /proc/sys/vm/drop_caches"); /* Open the xfs file */ fd = open(filename, O_RDONLY); assert(fd > 0); /* Create VMA */ buf = mmap(NULL, TEST_MEM_SIZE, PROT_READ, MAP_SHARED, fd, 0); assert(buf != (void *)-1); fprintf(stdout, "mapped buffer at 0x%p\n", buf); /* Populate VMA */ ret = madvise(buf, TEST_MEM_SIZE, MADV_NOHUGEPAGE); assert(ret == 0); ret = madvise(buf, TEST_MEM_SIZE, MADV_POPULATE_READ); assert(ret == 0); /* Collapse VMA */ ret = madvise(buf, TEST_MEM_SIZE, MADV_HUGEPAGE); assert(ret == 0); ret = madvise(buf, TEST_MEM_SIZE, MADV_COLLAPSE); if (ret) { fprintf(stdout, "Error %d to madvise(MADV_COLLAPSE)\n", errno); goto out; } /* Split xarray entry. Write permission is needed */ munmap(buf, TEST_MEM_SIZE); buf = (void *)-1; close(fd); fd = open(filename, O_RDWR); assert(fd > 0); fallocate(fd, FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE, TEST_MEM_SIZE - pgsize, pgsize); out: if (buf != (void *)-1) munmap(buf, TEST_MEM_SIZE); if (fd > 0) close(fd); return ret; } [root@dhcp-10-26-1-207 ~]# gcc /tmp/test.c -o /tmp/test [root@dhcp-10-26-1-207 ~]# /tmp/test ------------[ cut here ]------------ WARNING: CPU: 25 PID: 7560 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \ nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \ nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm fuse \ xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 virtio_net \ sha1_ce net_failover virtio_blk virtio_console failover dimlib virtio_mmio CPU: 25 PID: 7560 Comm: test Kdump: loaded Not tainted 6.10.0-rc7-gavin+ #9 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : xas_split_alloc+0xf8/0x128 lr : split_huge_page_to_list_to_order+0x1c4/0x780 sp : ffff8000ac32f660 x29: ffff8000ac32f660 x28: ffff0000e0969eb0 x27: ffff8000ac32f6c0 x26: 0000000000000c40 x25: ffff0000e0969eb0 x24: 000000000000000d x23: ffff8000ac32f6c0 x22: ffffffdfc0700000 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffdfc0700000 x18: 0000000000000000 x17: 0000000000000000 x16: ffffd5f3708ffc70 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: ffffffffffffffc0 x10: 0000000000000040 x9 : ffffd5f3708e692c x8 : 0000000000000003 x7 : 0000000000000000 x6 : ffff0000e0969eb8 x5 : ffffd5f37289e378 x4 : 0000000000000000 x3 : 0000000000000c40 x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000 Call trace: xas_split_alloc+0xf8/0x128 split_huge_page_to_list_to_order+0x1c4/0x780 truncate_inode_partial_folio+0xdc/0x160 truncate_inode_pages_range+0x1b4/0x4a8 truncate_pagecache_range+0x84/0xa ---truncated--- 2024-09-14 CVE-2024-42317 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: s390/dasd: fix error checks in dasd_copy_pair_store() dasd_add_busid() can return an error via ERR_PTR() if an allocation fails. However, two callsites in dasd_copy_pair_store() do not check the result, potentially resulting in a NULL pointer dereference. Fix this by checking the result with IS_ERR() and returning the error up the stack. 2024-09-14 CVE-2024-42320 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: net: flow_dissector: use DEBUG_NET_WARN_ON_ONCE The following splat is easy to reproduce upstream as well as in -stable kernels. Florian Westphal provided the following commit: d1dab4f71d37 ("net: add and use __skb_get_hash_symmetric_net") but this complementary fix has been also suggested by Willem de Bruijn and it can be easily backported to -stable kernel which consists in using DEBUG_NET_WARN_ON_ONCE instead to silence the following splat given __skb_get_hash() is used by the nftables tracing infrastructure to to identify packets in traces. [69133.561393] ------------[ cut here ]------------ [69133.561404] WARNING: CPU: 0 PID: 43576 at net/core/flow_dissector.c:1104 __skb_flow_dissect+0x134f/ [...] [69133.561944] CPU: 0 PID: 43576 Comm: socat Not tainted 6.10.0-rc7+ #379 [69133.561959] RIP: 0010:__skb_flow_dissect+0x134f/0x2ad0 [69133.561970] Code: 83 f9 04 0f 84 b3 00 00 00 45 85 c9 0f 84 aa 00 00 00 41 83 f9 02 0f 84 81 fc ff ff 44 0f b7 b4 24 80 00 00 00 e9 8b f9 ff ff <0f> 0b e9 20 f3 ff ff 41 f6 c6 20 0f 84 e4 ef ff ff 48 8d 7b 12 e8 [69133.561979] RSP: 0018:ffffc90000006fc0 EFLAGS: 00010246 [69133.561988] RAX: 0000000000000000 RBX: ffffffff82f33e20 RCX: ffffffff81ab7e19 [69133.561994] RDX: dffffc0000000000 RSI: ffffc90000007388 RDI: ffff888103a1b418 [69133.562001] RBP: ffffc90000007310 R08: 0000000000000000 R09: 0000000000000000 [69133.562007] R10: ffffc90000007388 R11: ffffffff810cface R12: ffff888103a1b400 [69133.562013] R13: 0000000000000000 R14: ffffffff82f33e2a R15: ffffffff82f33e28 [69133.562020] FS: 00007f40f7131740(0000) GS:ffff888390800000(0000) knlGS:0000000000000000 [69133.562027] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [69133.562033] CR2: 00007f40f7346ee0 CR3: 000000015d200001 CR4: 00000000001706f0 [69133.562040] Call Trace: [69133.562044] <IRQ> [69133.562049] ? __warn+0x9f/0x1a0 [ 1211.841384] ? __skb_flow_dissect+0x107e/0x2860 [...] [ 1211.841496] ? bpf_flow_dissect+0x160/0x160 [ 1211.841753] __skb_get_hash+0x97/0x280 [ 1211.841765] ? __skb_get_hash_symmetric+0x230/0x230 [ 1211.841776] ? mod_find+0xbf/0xe0 [ 1211.841786] ? get_stack_info_noinstr+0x12/0xe0 [ 1211.841798] ? bpf_ksym_find+0x56/0xe0 [ 1211.841807] ? __rcu_read_unlock+0x2a/0x70 [ 1211.841819] nft_trace_init+0x1b9/0x1c0 [nf_tables] [ 1211.841895] ? nft_trace_notify+0x830/0x830 [nf_tables] [ 1211.841964] ? get_stack_info+0x2b/0x80 [ 1211.841975] ? nft_do_chain_arp+0x80/0x80 [nf_tables] [ 1211.842044] nft_do_chain+0x79c/0x850 [nf_tables] 2024-09-14 CVE-2024-42321 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: net: missing check virtio Two missing check in virtio_net_hdr_to_skb() allowed syzbot to crash kernels again 1. After the skb_segment function the buffer may become non-linear (nr_frags != 0), but since the SKBTX_SHARED_FRAG flag is not set anywhere the __skb_linearize function will not be executed, then the buffer will remain non-linear. Then the condition (offset >= skb_headlen(skb)) becomes true, which causes WARN_ON_ONCE in skb_checksum_help. 2. The struct sk_buff and struct virtio_net_hdr members must be mathematically related. (gso_size) must be greater than (needed) otherwise WARN_ON_ONCE. (remainder) must be greater than (needed) otherwise WARN_ON_ONCE. (remainder) may be 0 if division is without remainder. offset+2 (4191) > skb_headlen() (1116) WARNING: CPU: 1 PID: 5084 at net/core/dev.c:3303 skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303 Modules linked in: CPU: 1 PID: 5084 Comm: syz-executor336 Not tainted 6.7.0-rc3-syzkaller-00014-gdf60cee26a2e #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 RIP: 0010:skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303 Code: 89 e8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 52 01 00 00 44 89 e2 2b 53 74 4c 89 ee 48 c7 c7 40 57 e9 8b e8 af 8f dd f8 90 <0f> 0b 90 90 e9 87 fe ff ff e8 40 0f 6e f9 e9 4b fa ff ff 48 89 ef RSP: 0018:ffffc90003a9f338 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff888025125780 RCX: ffffffff814db209 RDX: ffff888015393b80 RSI: ffffffff814db216 RDI: 0000000000000001 RBP: ffff8880251257f4 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 000000000000045c R13: 000000000000105f R14: ffff8880251257f0 R15: 000000000000105d FS: 0000555555c24380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002000f000 CR3: 0000000023151000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ip_do_fragment+0xa1b/0x18b0 net/ipv4/ip_output.c:777 ip_fragment.constprop.0+0x161/0x230 net/ipv4/ip_output.c:584 ip_finish_output_gso net/ipv4/ip_output.c:286 [inline] __ip_finish_output net/ipv4/ip_output.c:308 [inline] __ip_finish_output+0x49c/0x650 net/ipv4/ip_output.c:295 ip_finish_output+0x31/0x310 net/ipv4/ip_output.c:323 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip_output+0x13b/0x2a0 net/ipv4/ip_output.c:433 dst_output include/net/dst.h:451 [inline] ip_local_out+0xaf/0x1a0 net/ipv4/ip_output.c:129 iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82 ipip6_tunnel_xmit net/ipv6/sit.c:1034 [inline] sit_tunnel_xmit+0xed2/0x28f0 net/ipv6/sit.c:1076 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3545 [inline] dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3561 __dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4346 dev_queue_xmit include/linux/netdevice.h:3134 [inline] packet_xmit+0x257/0x380 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x24ca/0x5240 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 __sys_sendto+0x255/0x340 net/socket.c:2190 __do_sys_sendto net/socket.c:2202 [inline] __se_sys_sendto net/socket.c:2198 [inline] __x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Found by Linux Verification Center (linuxtesting.org) with Syzkaller 2024-09-14 CVE-2024-43817 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: Adjust error handling in case of absent codec device acpi_get_first_physical_node() can return NULL in several cases (no such device, ACPI table error, reference count drop to 0, etc). Existing check just emit error message, but doesn't perform return. Then this NULL pointer is passed to devm_acpi_dev_add_driver_gpios() where it is dereferenced. Adjust this error handling by adding error code return. Found by Linux Verification Center (linuxtesting.org) with SVACE. 2024-09-14 CVE-2024-43818 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix a possible null pointer dereference In function lpfc_xcvr_data_show, the memory allocation with kmalloc might fail, thereby making rdp_context a null pointer. In the following context and functions that use this pointer, there are dereferencing operations, leading to null pointer dereference. To fix this issue, a null pointer check should be added. If it is null, use scnprintf to notify the user and return len. 2024-09-14 CVE-2024-43821 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: iio: Fix the sorting functionality in iio_gts_build_avail_time_table The sorting in iio_gts_build_avail_time_table is not working as intended. It could result in an out-of-bounds access when the time is zero. Here are more details: 1. When the gts->itime_table[i].time_us is zero, e.g., the time sequence is `3, 0, 1`, the inner for-loop will not terminate and do out-of-bound writes. This is because once `times[j] > new`, the value `new` will be added in the current position and the `times[j]` will be moved to `j+1` position, which makes the if-condition always hold. Meanwhile, idx will be added one, making the loop keep running without termination and out-of-bound write. 2. If none of the gts->itime_table[i].time_us is zero, the elements will just be copied without being sorted as described in the comment "Sort times from all tables to one and remove duplicates". For more details, please refer to https://lore.kernel.org/all/6dd0d822-046c-4dd2-9532-79d7ab96ec05@gmail.com. 2024-09-14 CVE-2024-43825 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: nfs: pass explicit offset/count to trace events nfs_folio_length is unsafe to use without having the folio locked and a check for a NULL ->f_mapping that protects against truncations and can lead to kernel crashes. E.g. when running xfstests generic/065 with all nfs trace points enabled. Follow the model of the XFS trace points and pass in an explіcit offset and length. This has the additional benefit that these values can be more accurate as some of the users touch partial folio ranges. 2024-09-14 CVE-2024-43826 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: drm/qxl: Add check for drm_cvt_mode Add check for the return value of drm_cvt_mode() and return the error if it fails in order to avoid NULL pointer dereference. 2024-09-14 CVE-2024-43829 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: s390/uv: Don't call folio_wait_writeback() without a folio reference folio_wait_writeback() requires that no spinlocks are held and that a folio reference is held, as documented. After we dropped the PTL, the folio could get freed concurrently. So grab a temporary reference. 2024-09-14 CVE-2024-43832 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: media: v4l: async: Fix NULL pointer dereference in adding ancillary links In v4l2_async_create_ancillary_links(), ancillary links are created for lens and flash sub-devices. These are sub-device to sub-device links and if the async notifier is related to a V4L2 device, the source sub-device of the ancillary link is NULL, leading to a NULL pointer dereference. Check the notifier's sd field is non-NULL in v4l2_async_create_ancillary_links(). [Sakari Ailus: Reword the subject and commit messages slightly.] 2024-09-14 CVE-2024-43833 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: bpf: Fix null pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT When loading a EXT program without specifying `attr->attach_prog_fd`, the `prog->aux->dst_prog` will be null. At this time, calling resolve_prog_type() anywhere will result in a null pointer dereference. Example stack trace: [ 8.107863] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 8.108262] Mem abort info: [ 8.108384] ESR = 0x0000000096000004 [ 8.108547] EC = 0x25: DABT (current EL), IL = 32 bits [ 8.108722] SET = 0, FnV = 0 [ 8.108827] EA = 0, S1PTW = 0 [ 8.108939] FSC = 0x04: level 0 translation fault [ 8.109102] Data abort info: [ 8.109203] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 8.109399] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 8.109614] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 8.109836] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101354000 [ 8.110011] [0000000000000004] pgd=0000000000000000, p4d=0000000000000000 [ 8.112624] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 8.112783] Modules linked in: [ 8.113120] CPU: 0 PID: 99 Comm: may_access_dire Not tainted 6.10.0-rc3-next-20240613-dirty #1 [ 8.113230] Hardware name: linux,dummy-virt (DT) [ 8.113390] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 8.113429] pc : may_access_direct_pkt_data+0x24/0xa0 [ 8.113746] lr : add_subprog_and_kfunc+0x634/0x8e8 [ 8.113798] sp : ffff80008283b9f0 [ 8.113813] x29: ffff80008283b9f0 x28: ffff800082795048 x27: 0000000000000001 [ 8.113881] x26: ffff0000c0bb2600 x25: 0000000000000000 x24: 0000000000000000 [ 8.113897] x23: ffff0000c1134000 x22: 000000000001864f x21: ffff0000c1138000 [ 8.113912] x20: 0000000000000001 x19: ffff0000c12b8000 x18: ffffffffffffffff [ 8.113929] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720 [ 8.113944] x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 [ 8.113958] x11: 0720072007200720 x10: 0000000000f9fca4 x9 : ffff80008021f4e4 [ 8.113991] x8 : 0101010101010101 x7 : 746f72705f6d656d x6 : 000000001e0e0f5f [ 8.114006] x5 : 000000000001864f x4 : ffff0000c12b8000 x3 : 000000000000001c [ 8.114020] x2 : 0000000000000002 x1 : 0000000000000000 x0 : 0000000000000000 [ 8.114126] Call trace: [ 8.114159] may_access_direct_pkt_data+0x24/0xa0 [ 8.114202] bpf_check+0x3bc/0x28c0 [ 8.114214] bpf_prog_load+0x658/0xa58 [ 8.114227] __sys_bpf+0xc50/0x2250 [ 8.114240] __arm64_sys_bpf+0x28/0x40 [ 8.114254] invoke_syscall.constprop.0+0x54/0xf0 [ 8.114273] do_el0_svc+0x4c/0xd8 [ 8.114289] el0_svc+0x3c/0x140 [ 8.114305] el0t_64_sync_handler+0x134/0x150 [ 8.114331] el0t_64_sync+0x168/0x170 [ 8.114477] Code: 7100707f 54000081 f9401c00 f9403800 (b9400403) [ 8.118672] ---[ end trace 0000000000000000 ]--- One way to fix it is by forcing `attach_prog_fd` non-empty when bpf_prog_load(). But this will lead to `libbpf_probe_bpf_prog_type` API broken which use verifier log to probe prog type and will log nothing if we reject invalid EXT prog before bpf_check(). Another way is by adding null check in resolve_prog_type(). The issue was introduced by commit 4a9c7bbe2ed4 ("bpf: Resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT") which wanted to correct type resolution for BPF_PROG_TYPE_TRACING programs. Before that, the type resolution of BPF_PROG_TYPE_EXT prog actually follows the logic below: prog->aux->dst_prog ? prog->aux->dst_prog->type : prog->type; It implies that when EXT program is not yet attached to `dst_prog`, the prog type should be EXT itself. This code worked fine in the past. So just keep using it. Fix this by returning `prog->type` for BPF_PROG_TYPE_EXT if `dst_prog` is not present in resolve_prog_type(). 2024-09-14 CVE-2024-43837 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: wifi: virt_wifi: avoid reporting connection success with wrong SSID When user issues a connection with a different SSID than the one virt_wifi has advertised, the __cfg80211_connect_result() will trigger the warning: WARN_ON(bss_not_found). The issue is because the connection code in virt_wifi does not check the SSID from user space (it only checks the BSSID), and virt_wifi will call cfg80211_connect_result() with WLAN_STATUS_SUCCESS even if the SSID is different from the one virt_wifi has advertised. Eventually cfg80211 won't be able to find the cfg80211_bss and generate the warning. Fixed it by checking the SSID (from user space) in the connection code. 2024-09-14 CVE-2024-43841 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: Fix array index mistake in rtw89_sta_info_get_iter() In rtw89_sta_info_get_iter() 'status->he_gi' is compared to array size. But then 'rate->he_gi' is used as array index instead of 'status->he_gi'. This can lead to go beyond array boundaries in case of 'rate->he_gi' is not equal to 'status->he_gi' and is bigger than array size. Looks like "copy-paste" mistake. Fix this mistake by replacing 'rate->he_gi' with 'status->he_gi'. Found by Linux Verification Center (linuxtesting.org) with SVACE. 2024-09-14 CVE-2024-43842 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: udf: Fix bogus checksum computation in udf_rename() Syzbot reports uninitialized memory access in udf_rename() when updating checksum of '..' directory entry of a moved directory. This is indeed true as we pass on-stack diriter.fi to the udf_update_tag() and because that has only struct fileIdentDesc included in it and not the impUse or name fields, the checksumming function is going to checksum random stack contents beyond the end of the structure. This is actually harmless because the following udf_fiiter_write_fi() will recompute the checksum from on-disk buffers where everything is properly included. So all that is needed is just removing the bogus calculation. 2024-09-14 CVE-2024-43845 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: lib: objagg: Fix general protection fault The library supports aggregation of objects into other objects only if the parent object does not have a parent itself. That is, nesting is not supported. Aggregation happens in two cases: Without and with hints, where hints are a pre-computed recommendation on how to aggregate the provided objects. Nesting is not possible in the first case due to a check that prevents it, but in the second case there is no check because the assumption is that nesting cannot happen when creating objects based on hints. The violation of this assumption leads to various warnings and eventually to a general protection fault [1]. Before fixing the root cause, error out when nesting happens and warn. [1] general protection fault, probably for non-canonical address 0xdead000000000d90: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 1083 Comm: kworker/1:9 Tainted: G W 6.9.0-rc6-custom-gd9b4f1cca7fb #7 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_erp_bf_insert+0x25/0x80 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_entry_add+0x256/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270 mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> 2024-09-14 CVE-2024-43846 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix invalid memory access while processing fragmented packets The monitor ring and the reo reinject ring share the same ring mask index. When the driver receives an interrupt for the reo reinject ring, the monitor ring is also processed, leading to invalid memory access. Since monitor support is not yet enabled in ath12k, the ring mask for the monitor ring should be removed. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1 2024-09-14 CVE-2024-43847 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: soc: qcom: pdr: protect locator_addr with the main mutex If the service locator server is restarted fast enough, the PDR can rewrite locator_addr fields concurrently. Protect them by placing modification of those fields under the main pdr->lock. 2024-09-14 CVE-2024-43849 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: soc: qcom: icc-bwmon: Fix refcount imbalance seen during bwmon_remove The following warning is seen during bwmon_remove due to refcount imbalance, fix this by releasing the OPPs after use. Logs: WARNING: at drivers/opp/core.c:1640 _opp_table_kref_release+0x150/0x158 Hardware name: Qualcomm Technologies, Inc. X1E80100 CRD (DT) ... Call trace: _opp_table_kref_release+0x150/0x158 dev_pm_opp_remove_table+0x100/0x1b4 devm_pm_opp_of_table_release+0x10/0x1c devm_action_release+0x14/0x20 devres_release_all+0xa4/0x104 device_unbind_cleanup+0x18/0x60 device_release_driver_internal+0x1ec/0x228 driver_detach+0x50/0x98 bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 bwmon_driver_exit+0x18/0x524 [icc_bwmon] __arm64_sys_delete_module+0x184/0x264 invoke_syscall+0x48/0x118 el0_svc_common.constprop.0+0xc8/0xe8 do_el0_svc+0x20/0x2c el0_svc+0x34/0xdc el0t_64_sync_handler+0x13c/0x158 el0t_64_sync+0x190/0x194 --[ end trace 0000000000000000 ]--- 2024-09-14 CVE-2024-43850 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: soc: xilinx: rename cpu_number1 to dummy_cpu_number The per cpu variable cpu_number1 is passed to xlnx_event_handler as argument "dev_id", but it is not used in this function. So drop the initialization of this variable and rename it to dummy_cpu_number. This patch is to fix the following call trace when the kernel option CONFIG_DEBUG_ATOMIC_SLEEP is enabled: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 preempt_count: 1, expected: 0 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0 #53 Hardware name: Xilinx Versal vmk180 Eval board rev1.1 (QSPI) (DT) Call trace: dump_backtrace+0xd0/0xe0 show_stack+0x18/0x40 dump_stack_lvl+0x7c/0xa0 dump_stack+0x18/0x34 __might_resched+0x10c/0x140 __might_sleep+0x4c/0xa0 __kmem_cache_alloc_node+0xf4/0x168 kmalloc_trace+0x28/0x38 __request_percpu_irq+0x74/0x138 xlnx_event_manager_probe+0xf8/0x298 platform_probe+0x68/0xd8 2024-09-14 CVE-2024-43851 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: md: fix deadlock between mddev_suspend and flush bio Deadlock occurs when mddev is being suspended while some flush bio is in progress. It is a complex issue. T1. the first flush is at the ending stage, it clears 'mddev->flush_bio' and tries to submit data, but is blocked because mddev is suspended by T4. T2. the second flush sets 'mddev->flush_bio', and attempts to queue md_submit_flush_data(), which is already running (T1) and won't execute again if on the same CPU as T1. T3. the third flush inc active_io and tries to flush, but is blocked because 'mddev->flush_bio' is not NULL (set by T2). T4. mddev_suspend() is called and waits for active_io dec to 0 which is inc by T3. T1 T2 T3 T4 (flush 1) (flush 2) (third 3) (suspend) md_submit_flush_data mddev->flush_bio = NULL; . . md_flush_request . mddev->flush_bio = bio . queue submit_flushes . . . . md_handle_request . . active_io + 1 . . md_flush_request . . wait !mddev->flush_bio . . . . mddev_suspend . . wait !active_io . . . submit_flushes . queue_work md_submit_flush_data . //md_submit_flush_data is already running (T1) . md_handle_request wait resume The root issue is non-atomic inc/dec of active_io during flush process. active_io is dec before md_submit_flush_data is queued, and inc soon after md_submit_flush_data() run. md_flush_request active_io + 1 submit_flushes active_io - 1 md_submit_flush_data md_handle_request active_io + 1 make_request active_io - 1 If active_io is dec after md_handle_request() instead of within submit_flushes(), make_request() can be called directly intead of md_handle_request() in md_submit_flush_data(), and active_io will only inc and dec once in the whole flush process. Deadlock will be fixed. Additionally, the only difference between fixing the issue and before is that there is no return error handling of make_request(). But after previous patch cleaned md_write_start(), make_requst() only return error in raid5_make_request() by dm-raid, see commit 41425f96d7aa ("dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape)". Since dm always splits data and flush operation into two separate io, io size of flush submitted by dm always is 0, make_request() will not be called in md_submit_flush_data(). To prevent future modifications from introducing issues, add WARN_ON to ensure make_request() no error is returned in this context. 2024-09-14 CVE-2024-43855 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:dma: fix call order in dmam_free_coherentdmam_free_coherent() frees a DMA allocation, which makes thefreed vaddr available for reuse, then calls devres_destroy()to remove and free the data structure used to track the DMAallocation. Between the two calls, it is possible for aconcurrent task to make an allocation with the same vaddrand add it to the devres list.If this happens, there will be two entries in the devres listwith the same vaddr and devres_destroy() can free the wrongentry, triggering the WARN_ON() in dmam_match.Fix by destroying the devres entry before freeing the DMAallocation. kokonut //net/encryption http://sponge2/b9145fe6-0f72-4325-ac2f-a84d81075b03 2024-09-14 CVE-2024-43856 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to truncate preallocated blocks in f2fs_file_open() chenyuwen reports a f2fs bug as below: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000011 fscrypt_set_bio_crypt_ctx+0x78/0x1e8 f2fs_grab_read_bio+0x78/0x208 f2fs_submit_page_read+0x44/0x154 f2fs_get_read_data_page+0x288/0x5f4 f2fs_get_lock_data_page+0x60/0x190 truncate_partial_data_page+0x108/0x4fc f2fs_do_truncate_blocks+0x344/0x5f0 f2fs_truncate_blocks+0x6c/0x134 f2fs_truncate+0xd8/0x200 f2fs_iget+0x20c/0x5ac do_garbage_collect+0x5d0/0xf6c f2fs_gc+0x22c/0x6a4 f2fs_disable_checkpoint+0xc8/0x310 f2fs_fill_super+0x14bc/0x1764 mount_bdev+0x1b4/0x21c f2fs_mount+0x20/0x30 legacy_get_tree+0x50/0xbc vfs_get_tree+0x5c/0x1b0 do_new_mount+0x298/0x4cc path_mount+0x33c/0x5fc __arm64_sys_mount+0xcc/0x15c invoke_syscall+0x60/0x150 el0_svc_common+0xb8/0xf8 do_el0_svc+0x28/0xa0 el0_svc+0x24/0x84 el0t_64_sync_handler+0x88/0xec It is because inode.i_crypt_info is not initialized during below path: - mount - f2fs_fill_super - f2fs_disable_checkpoint - f2fs_gc - f2fs_iget - f2fs_truncate So, let's relocate truncation of preallocated blocks to f2fs_file_open(), after fscrypt_file_open(). 2024-09-14 CVE-2024-43859 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: usb: vhci-hcd: Do not drop references before new references are gained At a few places the driver carries stale pointers to references that can still be used. Make sure that does not happen. This strictly speaking closes ZDI-CAN-22273, though there may be similar races in the driver. 2024-09-14 CVE-2024-43883 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Add error handling to pair_device() hci_conn_params_add() never checks for a NULL value and could lead to a NULL pointer dereference causing a crash. Fixed by adding error handling in the function. 2024-09-14 CVE-2024-43884 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:padata: Fix possible divide-by-0 panic in padata_mt_helper()We are hit with a not easily reproducible divide-by-0 panic in padata.c atbootup time. [ 10.017908] Oops: divide error: 0000 1 PREEMPT SMP NOPTI [ 10.017908] CPU: 26 PID: 2627 Comm: kworker/u1666:1 Not tainted 6.10.0-15.el10.x86_64 #1 [ 10.017908] Hardware name: Lenovo ThinkSystem SR950 [7X12CTO1WW]/[7X12CTO1WW], BIOS [PSE140J-2.30] 07/20/2021 [ 10.017908] Workqueue: events_unbound padata_mt_helper [ 10.017908] RIP: 0010:padata_mt_helper+0x39/0xb0 : [ 10.017963] Call Trace: [ 10.017968] <TASK> [ 10.018004] ? padata_mt_helper+0x39/0xb0 [ 10.018084] process_one_work+0x174/0x330 [ 10.018093] worker_thread+0x266/0x3a0 [ 10.018111] kthread+0xcf/0x100 [ 10.018124] ret_from_fork+0x31/0x50 [ 10.018138] ret_from_fork_asm+0x1a/0x30 [ 10.018147] </TASK>Looking at the padata_mt_helper() function, the only way a divide-by-0panic can happen is when ps->chunk_size is 0. The way that chunk_size isinitialized in padata_do_multithreaded(), chunk_size can be 0 when themin_chunk in the passed-in padata_mt_job structure is 0.Fix this divide-by-0 panic by making sure that chunk_size will be at least1 no matter what the input parameters are. 2024-09-14 CVE-2024-43889 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:tracing: Fix overflow in get_free_elt() tracing_map->next_elt in get_free_elt() is at risk of overflowing.Once it overflows, new elements can still be inserted into the tracing_mapeven though the maximum number of elements (`max_elts`) has been reached.Continuing to insert elements after the overflow could result in thetracing_map containing tracing_map->max_size elements, leaving no emptyentries.If any attempt is made to insert an element into a full tracing_map using`__tracing_map_insert()`, it will cause an infinite loop with preemptiondisabled, leading to a CPU hang problem.Fix this by preventing any further increments to tracing_map->next_elt once it reaches tracing_map->max_elt . 2024-09-14 CVE-2024-43890 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: tracing: Have format file honor EVENT_FILE_FL_FREED When eventfs was introduced, special care had to be done to coordinate the freeing of the file meta data with the files that are exposed to user space. The file meta data would have a ref count that is set when the file is created and would be decremented and freed after the last user that opened the file closed it. When the file meta data was to be freed, it would set a flag (EVENT_FILE_FL_FREED) to denote that the file is freed, and any new references made (like new opens or reads) would fail as it is marked freed. This allowed other meta data to be freed after this flag was set (under the event_mutex). All the files that were dynamically created in the events directory had a pointer to the file meta data and would call event_release() when the last reference to the user space file was closed. This would be the time that it is safe to free the file meta data. A shortcut was made for the "format" file. It's i_private would point to the "call" entry directly and not point to the file's meta data. This is because all format files are the same for the same "call", so it was thought there was no reason to differentiate them. The other files maintain state (like the "enable", "trigger", etc). But this meant if the file were to disappear, the "format" file would be unaware of it. This caused a race that could be trigger via the user_events test (that would create dynamic events and free them), and running a loop that would read the user_events format files: In one console run: # cd tools/testing/selftests/user_events # while true; do ./ftrace_test; done And in another console run: # cd /sys/kernel/tracing/ # while true; do cat events/user_events/__test_event/format; done 2>/dev/null With KASAN memory checking, it would trigger a use-after-free bug report (which was a real bug). This was because the format file was not checking the file's meta data flag "EVENT_FILE_FL_FREED", so it would access the event that the file meta data pointed to after the event was freed. After inspection, there are other locations that were found to not check the EVENT_FILE_FL_FREED flag when accessing the trace_event_file. Add a new helper function: event_file_file() that will make sure that the event_mutex is held, and will return NULL if the trace_event_file has the EVENT_FILE_FL_FREED flag set. Have the first reference of the struct file pointer use event_file_file() and check for NULL. Later uses can still use the event_file_data() helper function if the event_mutex is still held and was not released since the event_file_file() call. 2024-09-14 CVE-2024-43891 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip Recompute DSC Params if no Stream on Link [why] Encounter NULL pointer dereference uner mst + dsc setup. BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2 Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022 RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? plist_add+0xbe/0x100 ? exc_page_fault+0x7c/0x180 ? asm_exc_page_fault+0x26/0x30 ? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] ? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] ? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] drm_atomic_check_only+0x5c5/0xa40 drm_mode_atomic_ioctl+0x76e/0xbc0 [how] dsc recompute should be skipped if no mode change detected on the new request. If detected, keep checking whether the stream is already on current state or not. (cherry picked from commit 8151a6c13111b465dbabe07c19f572f7cbd16fef) 2024-09-14 CVE-2024-43895 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: net: drop bad gso csum_start and offset in virtio_net_hdr Tighten csum_start and csum_offset checks in virtio_net_hdr_to_skb for GSO packets. The function already checks that a checksum requested with VIRTIO_NET_HDR_F_NEEDS_CSUM is in skb linear. But for GSO packets this might not hold for segs after segmentation. Syzkaller demonstrated to reach this warning in skb_checksum_help offset = skb_checksum_start_offset(skb); ret = -EINVAL; if (WARN_ON_ONCE(offset >= skb_headlen(skb))) By injecting a TSO packet: WARNING: CPU: 1 PID: 3539 at net/core/dev.c:3284 skb_checksum_help+0x3d0/0x5b0 ip_do_fragment+0x209/0x1b20 net/ipv4/ip_output.c:774 ip_finish_output_gso net/ipv4/ip_output.c:279 [inline] __ip_finish_output+0x2bd/0x4b0 net/ipv4/ip_output.c:301 iptunnel_xmit+0x50c/0x930 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x2296/0x2c70 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x759/0xa60 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4850 [inline] netdev_start_xmit include/linux/netdevice.h:4864 [inline] xmit_one net/core/dev.c:3595 [inline] dev_hard_start_xmit+0x261/0x8c0 net/core/dev.c:3611 __dev_queue_xmit+0x1b97/0x3c90 net/core/dev.c:4261 packet_snd net/packet/af_packet.c:3073 [inline] The geometry of the bad input packet at tcp_gso_segment: [ 52.003050][ T8403] skb len=12202 headroom=244 headlen=12093 tailroom=0 [ 52.003050][ T8403] mac=(168,24) mac_len=24 net=(192,52) trans=244 [ 52.003050][ T8403] shinfo(txflags=0 nr_frags=1 gso(size=1552 type=3 segs=0)) [ 52.003050][ T8403] csum(0x60000c7 start=199 offset=1536 ip_summed=3 complete_sw=0 valid=0 level=0) Mitigate with stricter input validation. csum_offset: for GSO packets, deduce the correct value from gso_type. This is already done for USO. Extend it to TSO. Let UFO be: udp[46]_ufo_fragment ignores these fields and always computes the checksum in software. csum_start: finding the real offset requires parsing to the transport header. Do not add a parser, use existing segmentation parsing. Thanks to SKB_GSO_DODGY, that also catches bad packets that are hw offloaded. Again test both TSO and USO. Do not test UFO for the above reason, and do not test UDP tunnel offload. GSO packet are almost always CHECKSUM_PARTIAL. USO packets may be CHECKSUM_NONE since commit 10154dbded6d6 ("udp: Allow GSO transmit from devices with no checksum offload"), but then still these fields are initialized correctly in udp4_hwcsum/udp6_hwcsum_outgoing. So no need to test for ip_summed == CHECKSUM_PARTIAL first. This revises an existing fix mentioned in the Fixes tag, which broke small packets with GSO offload, as detected by kselftests. 2024-09-14 CVE-2024-43897 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:ext4: sanity check for NULL pointer after ext4_force_shutdownTest case: 2 threads write short inline data to a file.In ext4_page_mkwrite the resulting inline data is converted.Handling ext4_grp_locked_error with description block bitmapand bg descriptor inconsistent: X vs Y free clusters callsext4_force_shutdown. The conversion clearsEXT4_STATE_MAY_INLINE_DATA but fails forext4_destroy_inline_data_nolock and ext4_mark_iloc_dirty dueto ext4_forced_shutdown. The restoration of inline data failsfor the same reason not setting EXT4_STATE_MAY_INLINE_DATA.Without the flag set a regular process path in ext4_da_write_endfollows trying to dereference page folio private pointer that hasnot been set. The fix calls early return with -EIO error shall thepointer to private be NULL.Sample crash report:Unable to handle kernel paging request at virtual address dfff800000000004KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation faultData abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0[dfff800000000004] address between user and kernel address rangesInternal error: Oops: 0000000096000005 [#1] PREEMPT SMPModules linked in:CPU: 1 PID: 20274 Comm: syz-executor185 Not tainted 6.9.0-rc7-syzkaller-gfda5695d692c #0Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)pc : __block_commit_write+0x64/0x2b0 fs/buffer.c:2167lr : __block_commit_write+0x3c/0x2b0 fs/buffer.c:2160sp : ffff8000a1957600x29: ffff8000a1957610 x28: dfff800000000000 x27: ffff0000e30e34b0x26: 0000000000000000 x25: dfff800000000000 x24: dfff800000000000x23: fffffdffc397c9e0 x22: 0000000000000020 x21: 0000000000000020x20: 0000000000000040 x19: fffffdffc397c9c0 x18: 1fffe000367bd196x17: ffff80008eead000 x16: ffff80008ae89e3c x15: 00000000200000c0x14: 1fffe0001cbe4e04 x13: 0000000000000000 x12: 0000000000000000x11: 0000000000000001 x10: 0000000000ff0100 x9 : 0000000000000000x8 : 0000000000000004 x7 : 0000000000000000 x6 : 0000000000000000x5 : fffffdffc397c9c0 x4 : 0000000000000020 x3 : 0000000000000020x2 : 0000000000000040 x1 : 0000000000000020 x0 : fffffdffc397c9c0Call trace: __block_commit_write+0x64/0x2b0 fs/buffer.c:2167 block_write_end+0xb4/0x104 fs/buffer.c:2253 ext4_da_do_write_end fs/ext4/inode.c:2955 [inline] ext4_da_write_end+0x2c4/0xa40 fs/ext4/inode.c:3028 generic_perform_write+0x394/0x588 mm/filemap.c:3985 ext4_buffered_write_iter+0x2c0/0x4ec fs/ext4/file.c:299 ext4_file_write_iter+0x188/0x1780 call_write_iter include/linux/fs.h:2110 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0x968/0xc3c fs/read_write.c:590 ksys_write+0x15c/0x26c fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __arm64_sys_write+0x7c/0x90 fs/read_write.c:652 __invoke_syscall arch/arm64/kernel/syscall.c:34 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:48 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:133 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:152 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598Code: 97f85911 f94002da 91008356 d343fec8 (38796908)---[ end trace 0000000000000000 ]-------------------Code disassembly (best guess): 0: 97f85911 bl 0xffffffffffe16444 4: f94002da ldr x26, [x22] 8: 91008356 add x22, x26, #0x20 c: d343fec8 lsr x8, x22, #3* 10: 38796908 ldrb w8, [x8, x25] <-- trapping instruction 2024-09-14 CVE-2024-43898 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:drm/amd/display: Fix null pointer deref in dcn20_resource.cFixes a hang thats triggered when MPV is run on a DCN401 dGPU:mpv --hwdec=vaapi --vo=gpu --hwdec-codecs=alland then enabling fullscreen playback (double click on the video)The following calltrace will be seen:[ 181.843989] BUG: kernel NULL pointer dereference, address: 0000000000000000[ 181.843997] #PF: supervisor instruction fetch in kernel mode[ 181.844003] #PF: error_code(0x0010) - not-present page[ 181.844009] PGD 0 P4D 0[ 181.844020] Oops: 0010 [#1] PREEMPT SMP NOPTI[ 181.844028] CPU: 6 PID: 1892 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic #41~22.04.2-Ubuntu[ 181.844038] Hardware name: System manufacturer System Product Name/CROSSHAIR VI HERO, BIOS 6302 10/23/2018[ 181.844044] RIP: 0010:0x0[ 181.844079] Code: Unable to access opcode bytes at 0xffffffffffffffd6.[ 181.844084] RSP: 0018:ffffb593c2b8f7b0 EFLAGS: 00010246[ 181.844093] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004[ 181.844099] RDX: ffffb593c2b8f804 RSI: ffffb593c2b8f7e0 RDI: ffff9e3c8e758400[ 181.844105] RBP: ffffb593c2b8f7b8 R08: ffffb593c2b8f9c8 R09: ffffb593c2b8f96c[ 181.844110] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb593c2b8f9c8[ 181.844115] R13: 0000000000000001 R14: ffff9e3c88000000 R15: 0000000000000005[ 181.844121] FS: 00007c6e323bb5c0(0000) GS:ffff9e3f85f80000(0000) knlGS:0000000000000000[ 181.844128] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 181.844134] CR2: ffffffffffffffd6 CR3: 0000000140fbe000 CR4: 00000000003506e0[ 181.844141] Call Trace:[ 181.844146] <TASK>[ 181.844153] ? show_regs+0x6d/0x80[ 181.844167] ? __die+0x24/0x80[ 181.844179] ? page_fault_oops+0x99/0x1b0[ 181.844192] ? do_user_addr_fault+0x31d/0x6b0[ 181.844204] ? exc_page_fault+0x83/0x1b0[ 181.844216] ? asm_exc_page_fault+0x27/0x30[ 181.844237] dcn20_get_dcc_compression_cap+0x23/0x30 [amdgpu][ 181.845115] amdgpu_dm_plane_validate_dcc.constprop.0+0xe5/0x180 [amdgpu][ 181.845985] amdgpu_dm_plane_fill_plane_buffer_attributes+0x300/0x580 [amdgpu][ 181.846848] fill_dc_plane_info_and_addr+0x258/0x350 [amdgpu][ 181.847734] fill_dc_plane_attributes+0x162/0x350 [amdgpu][ 181.848748] dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu][ 181.849791] ? dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu][ 181.850840] amdgpu_dm_atomic_check+0xdfe/0x1760 [amdgpu] 2024-09-14 CVE-2024-43899 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: media: xc2028: avoid use-after-free in load_firmware_cb() syzkaller reported use-after-free in load_firmware_cb() [1]. The reason is because the module allocated a struct tuner in tuner_probe(), and then the module initialization failed, the struct tuner was released. A worker which created during module initialization accesses this struct tuner later, it caused use-after-free. The process is as follows: task-6504 worker_thread tuner_probe <= alloc dvb_frontend [2] ... request_firmware_nowait <= create a worker ... tuner_remove <= free dvb_frontend ... request_firmware_work_func <= the firmware is ready load_firmware_cb <= but now the dvb_frontend has been freed To fix the issue, check the dvd_frontend in load_firmware_cb(), if it is null, report a warning and just return. [1]: ================================================================== BUG: KASAN: use-after-free in load_firmware_cb+0x1310/0x17a0 Read of size 8 at addr ffff8000d7ca2308 by task kworker/2:3/6504 Call trace: load_firmware_cb+0x1310/0x17a0 request_firmware_work_func+0x128/0x220 process_one_work+0x770/0x1824 worker_thread+0x488/0xea0 kthread+0x300/0x430 ret_from_fork+0x10/0x20 Allocated by task 6504: kzalloc tuner_probe+0xb0/0x1430 i2c_device_probe+0x92c/0xaf0 really_probe+0x678/0xcd0 driver_probe_device+0x280/0x370 __device_attach_driver+0x220/0x330 bus_for_each_drv+0x134/0x1c0 __device_attach+0x1f4/0x410 device_initial_probe+0x20/0x30 bus_probe_device+0x184/0x200 device_add+0x924/0x12c0 device_register+0x24/0x30 i2c_new_device+0x4e0/0xc44 v4l2_i2c_new_subdev_board+0xbc/0x290 v4l2_i2c_new_subdev+0xc8/0x104 em28xx_v4l2_init+0x1dd0/0x3770 Freed by task 6504: kfree+0x238/0x4e4 tuner_remove+0x144/0x1c0 i2c_device_remove+0xc8/0x290 __device_release_driver+0x314/0x5fc device_release_driver+0x30/0x44 bus_remove_device+0x244/0x490 device_del+0x350/0x900 device_unregister+0x28/0xd0 i2c_unregister_device+0x174/0x1d0 v4l2_device_unregister+0x224/0x380 em28xx_v4l2_init+0x1d90/0x3770 The buggy address belongs to the object at ffff8000d7ca2000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 776 bytes inside of 2048-byte region [ffff8000d7ca2000, ffff8000d7ca2800) The buggy address belongs to the page: page:ffff7fe00035f280 count:1 mapcount:0 mapping:ffff8000c001f000 index:0x0 flags: 0x7ff800000000100(slab) raw: 07ff800000000100 ffff7fe00049d880 0000000300000003 ffff8000c001f000 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8000d7ca2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8000d7ca2300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8000d7ca2380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== [2] Actually, it is allocated for struct tuner, and dvb_frontend is inside. 2024-09-14 CVE-2024-43900 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:drm/amd/display: Add null checker before passing variablesChecks null pointer before passing variables to functions.This fixes 3 NULL_RETURNS issues reported by Coverity. 2024-09-14 CVE-2024-43902 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:drm/amd/pm: Fix the null pointer dereference for vega10_hwmgrCheck return value and conduct null pointer handling to avoid null pointer dereference. 2024-09-14 CVE-2024-43905 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: drm/admgpu: fix dereferencing null pointer context When user space sets an invalid ta type, the pointer context will be empty. So it need to check the pointer context before using it 2024-09-14 CVE-2024-43906 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm: Fix the null pointer dereference in apply_state_adjust_rules Check the pointer value to fix potential null pointer dereference 2024-09-14 CVE-2024-43907 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: Fix the null pointer dereference to ras_managerCheck ras_manager before using it 2024-09-14 CVE-2024-43908 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm: Fix the null pointer dereference for smu7 optimize the code to avoid pass a null pointer (hwmgr->backend) to function smu7_update_edc_leakage_table. 2024-09-14 CVE-2024-43909 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: disallow setting special AP channel widths Setting the AP channel width is meant for use with the normal 20/40/... MHz channel width progression, and switching around in S1G or narrow channels isn't supported. Disallow that. 2024-09-14 CVE-2024-43912 openEuler-24.03-LTS Low 3.3 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: nvme: apple: fix device reference counting Drivers must call nvme_uninit_ctrl after a successful nvme_init_ctrl. Split the allocation side out to make the error handling boundary easier to navigate. The apple driver had been doing this wrong, leaking the controller device memory on a tagset failure. 2024-09-14 CVE-2024-43913 openEuler-24.03-LTS Medium 4.4 AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:L kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:md/raid5: avoid BUG_ON() while continue reshape after reassemblingCurrently, mdadm support --revert-reshape to abort the reshape whilereassembling, as the test 07revert-grow. However, following BUG_ON()can be triggerred by the test:kernel BUG at drivers/md/raid5.c:6278!invalid opcode: 0000 [#1] PREEMPT SMP PTIirq event stamp: 158985CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94RIP: 0010:reshape_request+0x3f1/0xe60Call Trace: <TASK> raid5_sync_request+0x43d/0x550 md_do_sync+0xb7a/0x2110 md_thread+0x294/0x2b0 kthread+0x147/0x1c0 ret_from_fork+0x59/0x70 ret_from_fork_asm+0x1a/0x30 </TASK>Root cause is that --revert-reshape update the raid_disks from 5 to 4,while reshape position is still set, and after reassembling the array,reshape position will be read from super block, then during reshape thechecking of writepos that is caculated by old reshape position willfail.Fix this panic the easy way first, by converting the BUG_ON() toWARN_ON(), and stop the reshape if checkings fail.Noted that mdadm must fix --revert-shape as well, and probably md/raidshould enhance metadata validation as well, however this meansreassemble will fail and there must be user tools to fix the wrongmetadata. 2024-09-14 CVE-2024-43914 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:net: bridge: mcast: wait for previous gc cycles when removing portsyzbot hit a use-after-free[1] which is caused because the bridge doesn tmake sure that all previous garbage has been collected when removing aport. What happens is: CPU 1 CPU 2 start gc cycle remove port acquire gc lock first wait for lock call br_multicasg_gc() directly acquire lock now but free port the port can be freed while grp timers still runningMake sure all previous gc cycles have finished by using flush_work beforefreeing the port.[1] BUG: KASAN: slab-use-after-free in br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861 Read of size 8 at addr ffff888071d6d000 by task syz.5.1232/9699 CPU: 1 PID: 9699 Comm: syz.5.1232 Not tainted 6.10.0-rc5-syzkaller-00021-g24ca36a562d6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861 call_timer_fn+0x1a3/0x610 kernel/time/timer.c:1792 expire_timers kernel/time/timer.c:1843 [inline] __run_timers+0x74b/0xaf0 kernel/time/timer.c:2417 __run_timer_base kernel/time/timer.c:2428 [inline] __run_timer_base kernel/time/timer.c:2421 [inline] run_timer_base+0x111/0x190 kernel/time/timer.c:2437 2024-09-14 CVE-2024-44934 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved:sctp: Fix null-ptr-deref in reuseport_add_sock().syzbot reported a null-ptr-deref while accessing sk2->sk_reuseport_cb inreuseport_add_sock(). [0]The repro first creates a listener with SO_REUSEPORT. Then, it createsanother listener on the same port and concurrently closes the firstlistener.The second listen() calls reuseport_add_sock() with the first listener assk2, where sk2->sk_reuseport_cb is not expected to be cleared concurrently,but the close() does clear it by reuseport_detach_sock().The problem is SCTP does not properly synchronise reuseport_alloc(),reuseport_add_sock(), and reuseport_detach_sock().The caller of reuseport_alloc() and reuseport_{add,detach}_sock() mustprovide synchronisation for sockets that are classified into the samereuseport group.Otherwise, such sockets form multiple identical reuseport groups, andall groups except one would be silently dead. 1. Two sockets call listen() concurrently 2. No socket in the same group found in sctp_ep_hashtable[] 3. Two sockets call reuseport_alloc() and form two reuseport groups 4. Only one group hit first in __sctp_rcv_lookup_endpoint() receives incoming packetsAlso, the reported null-ptr-deref could occur.TCP/UDP guarantees that would not happen by holding the hash bucket lock.Let s apply the locking strategy to __sctp_hash_endpoint() and__sctp_unhash_endpoint().[0]:Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTIKASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]CPU: 1 UID: 0 PID: 10230 Comm: syz-executor119 Not tainted 6.10.0-syzkaller-12585-g301927d2d2eb #0Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024RIP: 0010:reuseport_add_sock+0x27e/0x5e0 net/core/sock_reuseport.c:350Code: 00 0f b7 5d 00 bf 01 00 00 00 89 de e8 1b a4 ff f7 83 fb 01 0f 85 a3 01 00 00 e8 6d a0 ff f7 49 8d 7e 12 48 89 f8 48 c1 e8 03 <42> 0f b6 04 28 84 c0 0f 85 4b 02 00 00 41 0f b7 5e 12 49 8d 7e 14RSP: 0018:ffffc9000b947c98 EFLAGS: 00010202RAX: 0000000000000002 RBX: ffff8880252ddf98 RCX: ffff888079478000RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000012RBP: 0000000000000001 R08: ffffffff8993e18d R09: 1ffffffff1fef385R10: dffffc0000000000 R11: fffffbfff1fef386 R12: ffff8880252ddac0R13: dffffc0000000000 R14: 0000000000000000 R15: 0000000000000000FS: 00007f24e45b96c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 00007ffcced5f7b8 CR3: 00000000241be000 CR4: 00000000003506f0DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400Call Trace: <TASK> __sctp_hash_endpoint net/sctp/input.c:762 [inline] sctp_hash_endpoint+0x52a/0x600 net/sctp/input.c:790 sctp_listen_start net/sctp/socket.c:8570 [inline] sctp_inet_listen+0x767/0xa20 net/sctp/socket.c:8625 __sys_listen_socket net/socket.c:1883 [inline] __sys_listen+0x1b7/0x230 net/socket.c:1894 __do_sys_listen net/socket.c:1902 [inline] __se_sys_listen net/socket.c:1900 [inline] __x64_sys_listen+0x5a/0x70 net/socket.c:1900 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7fRIP: 0033:0x7f24e46039b9Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48RSP: 002b:00007f24e45b9228 EFLAGS: 00000246 ORIG_RAX: 0000000000000032RAX: ffffffffffffffda RBX: 00007f24e468e428 RCX: 00007f24e46039b9RDX: 00007f24e46039b9 RSI: 0000000000000003 RDI: 0000000000000004RBP: 00007f24e468e420 R08: 00007f24e45b96c0 R09: 00007f24e45b96c0R10: 00007f24e45b96c0 R11: 0000000000000246 R12: 00007f24e468e42cR13:---truncated--- 2024-09-14 CVE-2024-44935 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: fou: remove warn in gue_gro_receive on unsupported protocol Drop the WARN_ON_ONCE inn gue_gro_receive if the encapsulated type is not known or does not have a GRO handler. Such a packet is easily constructed. Syzbot generates them and sets off this warning. Remove the warning as it is expected and not actionable. The warning was previously reduced from WARN_ON to WARN_ON_ONCE in commit 270136613bf7 ("fou: Do WARN_ON_ONCE in gue_gro_receive for bad proto callbacks"). 2024-09-14 CVE-2024-44940 openEuler-24.03-LTS High 7.5 AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on F2FS_INLINE_DATA flag in inode during GC syzbot reports a f2fs bug as below: ------------[ cut here ]------------ kernel BUG at fs/f2fs/inline.c:258! CPU: 1 PID: 34 Comm: kworker/u8:2 Not tainted 6.9.0-rc6-syzkaller-00012-g9e4bc4bcae01 #0 RIP: 0010:f2fs_write_inline_data+0x781/0x790 fs/f2fs/inline.c:258 Call Trace: f2fs_write_single_data_page+0xb65/0x1d60 fs/f2fs/data.c:2834 f2fs_write_cache_pages fs/f2fs/data.c:3133 [inline] __f2fs_write_data_pages fs/f2fs/data.c:3288 [inline] f2fs_write_data_pages+0x1efe/0x3a90 fs/f2fs/data.c:3315 do_writepages+0x35b/0x870 mm/page-writeback.c:2612 __writeback_single_inode+0x165/0x10b0 fs/fs-writeback.c:1650 writeback_sb_inodes+0x905/0x1260 fs/fs-writeback.c:1941 wb_writeback+0x457/0xce0 fs/fs-writeback.c:2117 wb_do_writeback fs/fs-writeback.c:2264 [inline] wb_workfn+0x410/0x1090 fs/fs-writeback.c:2304 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0xa12/0x17c0 kernel/workqueue.c:3335 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416 kthread+0x2f2/0x390 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 The root cause is: inline_data inode can be fuzzed, so that there may be valid blkaddr in its direct node, once f2fs triggers background GC to migrate the block, it will hit f2fs_bug_on() during dirty page writeback. Let's add sanity check on F2FS_INLINE_DATA flag in inode during GC, so that, it can forbid migrating inline_data inode's data block for fixing. 2024-09-14 CVE-2024-44942 openEuler-24.03-LTS High 7.8 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: kcm: Serialise kcm_sendmsg() for the same socket. syzkaller reported UAF in kcm_release(). [0] The scenario is 1. Thread A builds a skb with MSG_MORE and sets kcm->seq_skb. 2. Thread A resumes building skb from kcm->seq_skb but is blocked by sk_stream_wait_memory() 3. Thread B calls sendmsg() concurrently, finishes building kcm->seq_skb and puts the skb to the write queue 4. Thread A faces an error and finally frees skb that is already in the write queue 5. kcm_release() does double-free the skb in the write queue When a thread is building a MSG_MORE skb, another thread must not touch it. Let's add a per-sk mutex and serialise kcm_sendmsg(). [0]: BUG: KASAN: slab-use-after-free in __skb_unlink include/linux/skbuff.h:2366 [inline] BUG: KASAN: slab-use-after-free in __skb_dequeue include/linux/skbuff.h:2385 [inline] BUG: KASAN: slab-use-after-free in __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline] BUG: KASAN: slab-use-after-free in __skb_queue_purge include/linux/skbuff.h:3181 [inline] BUG: KASAN: slab-use-after-free in kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691 Read of size 8 at addr ffff0000ced0fc80 by task syz-executor329/6167 CPU: 1 PID: 6167 Comm: syz-executor329 Tainted: G B 6.8.0-rc5-syzkaller-g9abbc24128bc #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call trace: dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:291 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:298 __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0x178/0x518 mm/kasan/report.c:488 kasan_report+0xd8/0x138 mm/kasan/report.c:601 __asan_report_load8_noabort+0x20/0x2c mm/kasan/report_generic.c:381 __skb_unlink include/linux/skbuff.h:2366 [inline] __skb_dequeue include/linux/skbuff.h:2385 [inline] __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline] __skb_queue_purge include/linux/skbuff.h:3181 [inline] kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691 __sock_release net/socket.c:659 [inline] sock_close+0xa4/0x1e8 net/socket.c:1421 __fput+0x30c/0x738 fs/file_table.c:376 ____fput+0x20/0x30 fs/file_table.c:404 task_work_run+0x230/0x2e0 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x618/0x1f64 kernel/exit.c:871 do_group_exit+0x194/0x22c kernel/exit.c:1020 get_signal+0x1500/0x15ec kernel/signal.c:2893 do_signal+0x23c/0x3b44 arch/arm64/kernel/signal.c:1249 do_notify_resume+0x74/0x1f4 arch/arm64/kernel/entry-common.c:148 exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline] exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline] el0_svc+0xac/0x168 arch/arm64/kernel/entry-common.c:713 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Allocated by task 6166: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x40/0x78 mm/kasan/common.c:68 kasan_save_alloc_info+0x70/0x84 mm/kasan/generic.c:626 unpoison_slab_object mm/kasan/common.c:314 [inline] __kasan_slab_alloc+0x74/0x8c mm/kasan/common.c:340 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3813 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_node+0x204/0x4c0 mm/slub.c:3903 __alloc_skb+0x19c/0x3d8 net/core/skbuff.c:641 alloc_skb include/linux/skbuff.h:1296 [inline] kcm_sendmsg+0x1d3c/0x2124 net/kcm/kcmsock.c:783 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_sendmsg+0x220/0x2c0 net/socket.c:768 splice_to_socket+0x7cc/0xd58 fs/splice.c:889 do_splice_from fs/splice.c:941 [inline] direct_splice_actor+0xec/0x1d8 fs/splice.c:1164 splice_direct_to_actor+0x438/0xa0c fs/splice.c:1108 do_splice_direct_actor ---truncated--- 2024-09-14 CVE-2024-44946 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: fuse: Initialize beyond-EOF page contents before setting uptodate fuse_notify_store(), unlike fuse_do_readpage(), does not enable page zeroing (because it can be used to change partial page contents). So fuse_notify_store() must be more careful to fully initialize page contents (including parts of the page that are beyond end-of-file) before marking the page uptodate. The current code can leave beyond-EOF page contents uninitialized, which makes these uninitialized page contents visible to userspace via mmap(). This is an information leak, but only affects systems which do not enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the corresponding kernel command line parameter). 2024-09-14 CVE-2024-44947 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Forward soft recovery errors to userspace As we discussed before[1], soft recovery should be forwarded to userspace, or we can get into a really bad state where apps will keep submitting hanging command buffers cascading us to a hard reset. 1: https://lore.kernel.org/all/bf23d5ed-9a6b-43e7-84ee-8cbfd0d60f18@froggi.es/ (cherry picked from commit 434967aadbbbe3ad9103cc29e9a327de20fdba01) 2024-09-14 CVE-2024-44961 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: binfmt_flat: Fix corruption when not offsetting data start Commit 04d82a6d0881 ("binfmt_flat: allow not offsetting data start") introduced a RISC-V specific variant of the FLAT format which does not allocate any space for the (obsolete) array of shared library pointers. However, it did not disable the code which initializes the array, resulting in the corruption of sizeof(long) bytes before the DATA segment, generally the end of the TEXT segment. Introduce MAX_SHARED_LIBS_UPDATE which depends on the state of CONFIG_BINFMT_FLAT_NO_DATA_START_OFFSET to guard the initialization of the shared library pointer region so that it will only be initialized if space is reserved for it. 2024-09-14 CVE-2024-44966 openEuler-24.03-LTS Low 3.9 AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124 In the Linux kernel, the following vulnerability has been resolved: net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register() bcm_sf2_mdio_register() calls of_phy_find_device() and then phy_device_remove() in a loop to remove existing PHY devices. of_phy_find_device() eventually calls bus_find_device(), which calls get_device() on the returned struct device * to increment the refcount. The current implementation does not decrement the refcount, which causes memory leak. This commit adds the missing phy_device_free() call to decrement the refcount via put_device() to balance the refcount. 2024-09-14 CVE-2024-44971 openEuler-24.03-LTS Medium 5.5 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H kernel security update 2024-09-14 https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2124