Verisign, Inc.

12061 Bluemont Way Reston VA 20190 United States of America jgould@verisign.com https://www.verisign.com

Verisign, Inc.

12061 Bluemont Way Reston VA 20190 United States of America 4rickwilhelm@gmail.com https://www.verisign.com

EPP authinfo random short-lived strong storing securely The Extensible Provisioning Protocol (EPP) (RFC 5730) defines the use of authorization information to authorize a transfer of an EPP object, such as a domain name, between clients that are referred to as "registrars". Object-specific, password-based authorization information (see RFCs 5731 and 5733) is commonly used but raises issues related to the security, complexity, storage, and lifetime of authentication information. This document defines an operational practice, using the EPP RFCs, that leverages the use of strong random authorization information values that are short lived, not stored by the client, and stored by the server using a cryptographic hash that provides for secure authorization information that can safely be used for object transfers.

Status of This Memo This is an Internet Standards Track document. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at .

Copyright Notice Copyright (c) 2021 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents () in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.

Table of Contents

• .  Introduction
  • .  Conventions Used in This Document
• .  Registrant, Registrar, Registry
• .  Signaling Client and Server Support
• .  Secure Authorization Information
  • .  Secure Random Authorization Information
  • .  Authorization Information Time To Live (TTL)
  • .  Authorization Information Storage and Transport
  • .  Authorization Information Matching
• .  Create, Transfer, and Secure Authorization Information
  • .  <Create> Command
  • .  <Update> Command
  • .  <Info> Command and Response
  • .  <Transfer> Request Command
• .  Transition Considerations
  • .  Transition Phase 1 - Features
  • .  Transition Phase 2 - Storage
  • .  Transition Phase 3 - Enforcement
• .  IANA Considerations
  • .  XML Namespace
  • .  EPP Extension Registry
• .  Security Considerations
• .  References
  • .  Normative References
  • .  Informative References
• Acknowledgements
• Authors' Addresses

Introduction The Extensible Provisioning Protocol (EPP) defines the use of authorization information to authorize a transfer of an EPP object, such as a domain name, between clients that are referred to as "registrars". The authorization information is object specific and has been defined in "" and "" as password-based authorization information. Other authorization mechanisms can be used, but in practice the password-based authorization information has been used at the time of object creation, managed with the object update, and used to authorize an object transfer request. What has not been considered is the security of the authorization information, which includes the complexity of the authorization information, the Time To Live (TTL) of the authorization information, and where and how the authorization information is stored. The current/original lifecycle for authorization information involves long-term storage of encrypted (not hashed) passwords, which presents a significant latent risk of password compromise and is not consistent with current best practices. The mechanisms in this document provide a way to avoid long-term password storage entirely and to only require the storage of hashed (not retrievable) passwords instead of encrypted passwords. This document defines an operational practice, using the EPP RFCs, that leverages the use of strong, random authorization information values that are short lived, not stored by the client, and stored by the server using a cryptographic hash to provide secure authorization information used for transfers. This operational practice can be used to support transfers of any EPP object, where the domain name object as defined in is used in this document for illustration purposes. Elements of the practice may be used to support the secure use of the authorization information for purposes other than transfer, but any other purposes and the applicable elements are out of scope for this document. The overall goal is to have strong, random authorization information values that are short lived and are either not stored or stored as cryptographic hash values by the non-responsible parties. In a registrant, registrar, and registry model, the registrant registers the object through the registrar to the registry. The registrant is the responsible party, and the registrar and the registry are the non-responsible parties. EPP is a protocol between the registrar and the registry, where the registrar is referred to as the "client" and the registry is referred to as the "server". The following are the elements of the operational practice and how the existing features of the EPP RFCs can be leveraged to satisfy them:

Strong Random Authorization Information:

The EPP RFCs define the password-based authorization information value using an XML schema "normalizedString" type, so they don't restrict what can be used in any substantial way. This operational practice defines the recommended mechanism for creating a strong random authorization value that would be generated by the client.

Short-Lived Authorization Information:

The EPP RFCs don't explicitly support short-lived authorization information or a TTL for authorization information, but there are EPP RFC features that can be leveraged to support short-lived authorization information. All of these features are compatible with the EPP RFCs, though not mandatory to implement. As stated in , authorization information is assigned when a domain object is created, which results in long-lived authorization information. This specification changes the nature of the authorization information from long lived to short lived. If authorization information is set only when a transfer is in process, the server needs to support an empty authorization information value on create, support setting and unsetting authorization information, and support automatically unsetting the authorization information upon a successful transfer. All of these features can be supported by the EPP RFCs.

Storing Authorization Information Securely:

The EPP RFCs don't specify where and how the authorization information is stored in the client or the server, so there are no restrictions on defining an operational practice for storing the authorization information securely. The operational practice will require the client to not store the authorization information and will require the server to store the authorization information using a cryptographic hash with at least a 256-bit hash function, such as SHA-256 , and with a per-authorization information random salt with at least 128 bits. Returning the authorization information set in an EPP info response will not be supported.

Conventions Used in This Document The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 when, and only when, they appear in all capitals, as shown here. XML is case sensitive. Unless stated otherwise, XML specifications and examples provided in this document MUST be interpreted in the character case presented in order to develop a conforming implementation. In examples, "C:" represents lines sent by a protocol client and "S:" represents lines returned by a protocol server. Indentation and empty space in examples are provided only to illustrate element relationships and are not a required feature of this protocol. The examples reference XML namespace prefixes that are used for the associated XML namespaces. Implementations MUST NOT depend on the example XML namespaces and instead employ a proper namespace-aware XML parser and serializer to interpret and output the XML documents. The example namespace prefixes used and their associated XML namespaces include the following:

domain:

urn:ietf:params:xml:ns:domain-1.0

contact:

urn:ietf:params:xml:ns:contact-1.0

Registrant, Registrar, Registry The EPP RFCs refer to "client" and "server", but when it comes to transfers, there are three types of actors that are involved. This document will refer to these actors as "registrant", "registrar", and "registry". defines these terms formally for the Domain Name System (DNS). The terms are further described below to cover their roles as actors using the authorization information in the transfer process of any object in the registry, such as a domain name or a contact:

Registrant:

defines the registrant as "an individual or organization on whose behalf a name in a zone is registered by the registry." The registrant can be the owner of any object in the registry, such as a domain name or a contact. The registrant interfaces with the registrar for provisioning the objects. A transfer is coordinated by the registrant to transfer the sponsorship of the object from one registrar to another. The authorization information is meant to authenticate the registrant as the owner of the object to the non-sponsoring registrar and to authorize the transfer.

Registrar:

defines the registrar as "a service provider that acts as a go-between for registrants and registries." The registrar interfaces with the registrant for the provisioning of objects, such as domain names and contacts, and with the registries to satisfy the registrant's provisioning requests. A registrar may (1) directly interface with the registrant or (2) indirectly interface with the registrant, typically through one or more resellers. Implementing a transfer using secure authorization information extends through the registrar's reseller channel up to the direct interface with the registrant. The registrar's interface with the registries uses EPP. The registrar's interface with its reseller channel or the registrant is registrar specific. In the EPP RFCs, the registrar is referred to as the "client", since EPP is the protocol used between the registrar and the registry. The sponsoring registrar is the authorized registrar to manage objects on behalf of the registrant. A non-sponsoring registrar is not authorized to manage objects on behalf of the registrant. A transfer of an object's sponsorship is from one registrar, referred to as the "losing registrar", to another registrar, referred to as the "gaining registrar".

Registry:

defines the registry as "the administrative operation of a zone that allows registration of names within that zone." The registry typically interfaces with the registrars over EPP and generally does not interact directly with the registrant. In the EPP RFCs, the registry is referred to as the "server", since EPP is the protocol used between the registrar and the registry. The registry has a record of the sponsoring registrar for each object and provides the mechanism (over EPP) to coordinate a transfer of an object's sponsorship between registrars.

Signaling Client and Server Support This document does not define a new protocol; rather, it defines an operational practice using existing EPP features, where the client and the server can signal support for the operational practice using a namespace URI in the login and greeting extension services. The namespace URI "urn:ietf:params:xml:ns:epp:secure-authinfo-transfer-1.0" is used to signal support for the operational practice. The client includes the namespace URI in an <svcExtension> <extURI> element of the <login> command . The server includes the namespace URI in an <svcExtension> <extURI> element of the greeting . A client that receives the namespace URI in the server's greeting extension services can expect the following supported behavior by the server:

1. Support for an empty authorization information value with a <create> command.
2. Support for unsetting authorization information with an <update> command.
3. Support for validating authorization information with an <info> command.
4. Support for not returning an indication of whether the authorization information is set or unset to the non-sponsoring registrar.
5. Support for returning an empty authorization information value to the sponsoring registrar when the authorization information is set in an info response.
6. Support for allowing the passing of a matching non-empty authorization information value to authorize a transfer.
7. Support for automatically unsetting the authorization information upon successful completion of a transfer.

A server that receives the namespace URI in the client's <login> command extension services can expect the following supported behavior by the client:

1. Support for the generation of authorization information using a secure random value.
2. Support for only setting the authorization information when a transfer is in process.

Secure Authorization Information The EPP RFCs ( and ) use password-based authorization information to support transfer with the <domain:pw> element and with the <contact:pw> element . Other EPP objects that support password-based authorization information for transfer can use secure authorization information as defined in this document. For authorization information to be secure, it must be generated using a strong random value and have a short TTL. The security of the authorization information is defined in the following sections.

Secure Random Authorization Information For authorization information to be secure, it MUST be generated using a secure random value. The authorization information is treated as a password, and the required length L of a password, rounded up to the largest whole number, is based on the size N of the set of characters and the desired entropy H, in the equation L = ROUNDUP(H / log₂ N). Given a target entropy, the required length can be calculated after deciding on the set of characters that will be randomized. In accordance with current best practices and noting that the authorization information is a machine-generated value, the implementation SHOULD use at least 128 bits of entropy as the value of H. The lengths below are calculated using that value. Calculation of the required length with 128 bits of entropy and with the set of all printable ASCII characters except space (0x20), which consists of the 94 characters 0x21-0x7E: ROUNDUP(128 / log₂ 94) =~ ROUNDUP(128 / 6.55) =~ ROUNDUP(19.54) = 20 Calculation of the required length with 128 bits of entropy and with the set of case-insensitive alphanumeric characters, which consists of 36 characters (a-z A-Z 0-9): ROUNDUP(128 / log₂ 36) =~ ROUNDUP(128 / 5.17) =~ ROUNDUP(24.76) = 25 The strength of the random authorization information is dependent on the random number generator. Suitably strong random number generators are available in a wide variety of implementation environments, including the interfaces listed in Sections  and of . In environments that do not provide interfaces to strong random number generators, the practices defined in and Section 4.7.1 of the NIST Federal Information Processing Standards (FIPS) Publication 140-2 can be followed to produce random values that will be resistant to attack. (Note: FIPS 140-2 has been superseded by FIPS 140-3, but FIPS 140-3 does not contain information regarding random number generators.)

Authorization Information Time To Live (TTL) The authorization information SHOULD only be set when a transfer is in process. This implies that the authorization information has a TTL by which the authorization information is cleared when the TTL expires. The EPP RFCs do not provide definitions for TTL, but since the server supports the setting and unsetting of the authorization information by the sponsoring registrar, the sponsoring registrar can apply a TTL based on client policy. The TTL client policy may be based on proprietary registrar-specific criteria, which provides for a transfer-specific TTL tuned for the particular circumstances of the transaction. The sponsoring registrar will be aware of the TTL, and the sponsoring registrar MUST inform the registrant of the TTL when the authorization information is provided to the registrant.

Authorization Information Storage and Transport To protect the disclosure of the authorization information, the following requirements apply:

1. The authorization information MUST be stored by the registry using a strong one-way cryptographic hash with at least a 256-bit hash function, such as SHA-256 , and with a per-authorization information random salt with at least 128 bits.
2. An empty authorization information value MUST be stored as an undefined value that is referred to as a "NULL" value. The representation of a NULL (undefined) value is dependent on the type of database used.
3. The authorization information MUST NOT be stored by the losing registrar.
4. The authorization information MUST only be stored by the gaining registrar as a "transient" value in support of the transfer process.
5. The plain-text version of the authorization information MUST NOT be written to any logs by a registrar or the registry, nor otherwise recorded where it will persist beyond the transfer process.
6. All communication that includes the authorization information MUST be over an encrypted channel (for example, see ) for EPP.
7. The registrar's interface for communicating the authorization information with the registrant MUST be over an authenticated and encrypted channel.

Authorization Information Matching To support the authorization information TTL, as described in , the authorization information must have either a set or unset state. Authorization information that is unset is stored with a NULL (undefined) value. Based on the requirement to store the authorization information using a strong one-way cryptographic hash, as described in , authorization information that is set is stored with a non-NULL hashed value. The empty authorization information value is used as input in both the <create> command and the <update> command to define the unset state. The matching of the authorization information in the <info> command and the <transfer> request command is based on the following rules:

1. Any input authorization information value MUST NOT match an unset authorization information value. For example, in the input <domain:pw>2fooBAR</domain:pw> must not match an unset authorization information value that used <domain:null/> or <domain:pw/>.
2. An empty input authorization information value MUST NOT match any set authorization information value.
3. A non-empty input authorization information value MUST be hashed and matched against the set authorization information value, which is stored using the same hash algorithm.

Create, Transfer, and Secure Authorization Information To secure the transfer process using secure authorization information as described in , the client and server need to implement steps where the authorization information is set only when a transfer is actively in process and ensure that the authorization information is stored securely and transported only over secure channels. The steps for management of the authorization information for transfers include the following:

1. The registrant requests to register the object with the registrar. The registrar sends the <create> command with an empty authorization information value to the registry, as described in .
2. The registrant requests from the losing registrar the authorization information to provide to the gaining registrar.
3. The losing registrar generates a secure random authorization information value and sends it to the registry, as described in , and then provides it to the registrant.
4. The registrant provides the authorization information value to the gaining registrar.
5. The gaining registrar optionally verifies the authorization information with the <info> command to the registry, as described in .
6. The gaining registrar sends the transfer request with the authorization information to the registry, as described in .
7. If the transfer completes successfully, the registry automatically unsets the authorization information; otherwise, the losing registrar unsets the authorization information when the TTL expires; see .

The following sections outline the practices of the EPP commands and responses between the registrar and the registry that supports secure authorization information for transfer.

<Create> Command For a <create> command, the registry MUST allow the passing of an empty authorization information value and MAY disallow the passing of a non-empty authorization information value. By having an empty authorization information value on create, the object is initially not involved in the transfer process. Any EPP object extension that supports setting the authorization information with an "eppcom:pwAuthInfoType" element can pass an empty authorization information value. Examples of such extensions are found in and . Example of passing an empty authorization information value in a domain name <create> command : C:<?xml version="1.0" encoding="UTF-8" standalone="no"?> C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"> C: <command> C: <create> C: <domain:create C: xmlns:domain="urn:ietf:params:xml:ns:domain-1.0"> C: <domain:name>example.com</domain:name> C: <domain:authInfo> C: <domain:pw/> C: </domain:authInfo> C: </domain:create> C: </create> C: <clTRID>ABC-12345</clTRID> C: </command> C:</epp> Example of passing an empty authorization information value in a contact <create> command : C:<?xml version="1.0" encoding="UTF-8" standalone="no"?> C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"> C: <command> C: <create> C: <contact:create C: xmlns:contact="urn:ietf:params:xml:ns:contact-1.0"> C: <contact:id>sh8013</contact:id> C: <contact:postalInfo type="int"> C: <contact:name>John Doe</contact:name> C: <contact:addr> C: <contact:city>Dulles</contact:city> C: <contact:cc>US</contact:cc> C: </contact:addr> C: </contact:postalInfo> C: <contact:email>jdoe@example.com</contact:email> C: <contact:authInfo> C: <contact:pw/> C: </contact:authInfo> C: </contact:create> C: </create> C: <clTRID>ABC-12345</clTRID> C: </command> C:</epp>

<Update> Command For an <update> command, the registry MUST allow the setting and unsetting of the authorization information. The registrar sets the authorization information by first generating a strong, random authorization information value, based on the information provided in , and setting it in the registry in the <update> command. The importance of generating strong authorization information values cannot be overstated: secure transfers are very important to the Internet to mitigate damage in the form of theft, fraud, and other abuse. It is critical that registrars only use strong, randomly generated authorization information values. Because of this, registries may validate the randomness of the authorization information based on the length and character set required by the registry -- for example, validating that an authorization value contains a combination of uppercase, lowercase, and non-alphanumeric characters in an attempt to assess the strength of the value and returning an EPP error result of 2202 ("Invalid authorization information") if the check fails. Such checks are, by their nature, heuristic and imperfect, and may identify well-chosen authorization information values as being not sufficiently strong. Registrars, therefore, must be prepared for an error response of 2202 and respond by generating a new value and trying again, possibly more than once. Often, the registrar has the "clientTransferProhibited" status set, so to start the transfer process, the "clientTransferProhibited" status needs to be removed, and the strong, random authorization information value needs to be set. The registrar MUST define a TTL, as described in , and if the TTL expires, the registrar will unset the authorization information. Example of removing the "clientTransferProhibited" status and setting the authorization information in a domain name <update> command : C:<?xml version="1.0" encoding="UTF-8" standalone="no"?> C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"> C: <command> C: <update> C: <domain:update C: xmlns:domain="urn:ietf:params:xml:ns:domain-1.0"> C: <domain:name>example.com</domain:name> C: <domain:rem> C: <domain:status s="clientTransferProhibited"/> C: </domain:rem> C: <domain:chg> C: <domain:authInfo> C: <domain:pw>LuQ7Bu@w9?%+_HK3cayg$55$LSft3MPP C: </domain:pw> C: </domain:authInfo> C: </domain:chg> C: </domain:update> C: </update> C: <clTRID>ABC-12345-XYZ</clTRID> C: </command> C:</epp> When the registrar-defined TTL expires, the sponsoring registrar MUST cancel the transfer process by unsetting the authorization information value and MAY add back statuses like the "clientTransferProhibited" status. Any EPP object extension that supports setting the authorization information with an "eppcom:pwAuthInfoType" element can pass an empty authorization information value. Examples of such extensions are found in and . Setting an empty authorization information value unsets the authorization information. supports an explicit mechanism of unsetting the authorization information, by passing the <domain:null> authorization information value. The registry MUST support unsetting the authorization information by accepting an empty authorization information value and accepting an explicit unset element if it is supported by the object extension. Example of adding the "clientTransferProhibited" status and unsetting the authorization information explicitly in a domain name <update> command : C:<?xml version="1.0" encoding="UTF-8" standalone="no"?> C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"> C: <command> C: <update> C: <domain:update C: xmlns:domain="urn:ietf:params:xml:ns:domain-1.0"> C: <domain:name>example.com</domain:name> C: <domain:add> C: <domain:status s="clientTransferProhibited"/> C: </domain:add> C: <domain:chg> C: <domain:authInfo> C: <domain:null/> C: </domain:authInfo> C: </domain:chg> C: </domain:update> C: </update> C: <clTRID>ABC-12345-XYZ</clTRID> C: </command> C:</epp> Example of unsetting the authorization information with an empty authorization information value in a domain name <update> command : C:<?xml version="1.0" encoding="UTF-8" standalone="no"?> C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"> C: <command> C: <update> C: <domain:update C: xmlns:domain="urn:ietf:params:xml:ns:domain-1.0"> C: <domain:name>example.com</domain:name> C: <domain:add> C: <domain:status s="clientTransferProhibited"/> C: </domain:add> C: <domain:chg> C: <domain:authInfo> C: <domain:pw/> C: </domain:authInfo> C: </domain:chg> C: </domain:update> C: </update> C: <clTRID>ABC-12345-XYZ</clTRID> C: </command> C:</epp> Example of unsetting the authorization information with an empty authorization information value in a contact <update> command : C:<?xml version="1.0" encoding="UTF-8" standalone="no"?> C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"> C: <command> C: <update> C: <contact:update C: xmlns:contact="urn:ietf:params:xml:ns:contact-1.0"> C: <contact:id>sh8013</contact:id> C: <contact:chg> C: <contact:authInfo> C: <contact:pw/> C: </contact:authInfo> C: </contact:chg> C: </contact:update> C: </update> C: <clTRID>ABC-12345-XYZ</clTRID> C: </command> C:</epp>

<Info> Command and Response For an <info> command, the registry MUST allow the passing of a non-empty authorization information value for verification. The gaining registrar can pre-verify the authorization information provided by the registrant prior to submitting the transfer request with the use of the <info> command. The registry compares the hash of the passed authorization information with the hashed authorization information value stored for the object. When the authorization information is not set or the passed authorization information does not match the previously set value, the registry MUST return an EPP error result code of 2202 . Example of passing a non-empty authorization information value in a domain name <info> command to verify the authorization information value: C:<?xml version="1.0" encoding="UTF-8" standalone="no"?> C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"> C: <command> C: <info> C: <domain:info C: xmlns:domain="urn:ietf:params:xml:ns:domain-1.0"> C: <domain:name>example.com</domain:name> C: <domain:authInfo> C: <domain:pw>LuQ7Bu@w9?%+_HK3cayg$55$LSft3MPP C: </domain:pw> C: </domain:authInfo> C: </domain:info> C: </info> C: <clTRID>ABC-12345</clTRID> C: </command> C:</epp> The info response in object extensions, such as those defined in and , MUST NOT include the optional authorization information element with a non-empty authorization value. The authorization information is stored as a hash in the registry, so returning the plain-text authorization information is not possible, unless valid plain-text authorization information is passed in the <info> command. The registry MUST NOT return any indication of whether the authorization information is set or unset to the non-sponsoring registrar by not returning the authorization information element in the response. The registry MAY return an indication to the sponsoring registrar that the authorization information is set by using an empty authorization information value. The registry MAY return an indication to the sponsoring registrar that the authorization information is unset by not returning the authorization information element. Example of returning an empty authorization information value in a domain name info response to indicate to the sponsoring registrar that the authorization information is set: S:<?xml version="1.0" encoding="UTF-8" standalone="no"?> S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"> S: <response> S: <result code="1000"> S: <msg>Command completed successfully</msg> S: </result> S: <resData> S: <domain:infData S: xmlns:domain="urn:ietf:params:xml:ns:domain-1.0"> S: <domain:name>example.com</domain:name> S: <domain:roid>EXAMPLE1-REP</domain:roid> S: <domain:status s="ok"/> S: <domain:clID>ClientX</domain:clID> S: <domain:authInfo> S: <domain:pw/> S: </domain:authInfo> S: </domain:infData> S: </resData> S: <trID> S: <clTRID>ABC-12345</clTRID> S: <svTRID>54322-XYZ</svTRID> S: </trID> S: </response> S:</epp>

<Transfer> Request Command For a <transfer> request command, the registry MUST allow the passing of a non-empty authorization information value to authorize a transfer. The registry compares the hash of the passed authorization information with the hashed authorization information value stored for the object. When the authorization information is not set or the passed authorization information does not match the previously set value, the registry MUST return an EPP error result code of 2202 . Whether the transfer occurs immediately or is pending is up to server policy. When the transfer occurs immediately, the registry MUST return the EPP success result code of 1000 ("Command completed successfully") , and when the transfer is pending, the registry MUST return the EPP success result code of 1001 ("Command completed successfully; action pending"). The losing registrar MUST be informed of a successful transfer request using an EPP <poll> message. Example of passing a non-empty authorization information value in a domain name <transfer> request command to authorize the transfer: C:<?xml version="1.0" encoding="UTF-8" standalone="no"?> C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"> C: <command> C: <transfer op="request"> C: <domain:transfer C: xmlns:domain="urn:ietf:params:xml:ns:domain-1.0"> C: <domain:name>example1.com</domain:name> C: <domain:authInfo> C: <domain:pw>LuQ7Bu@w9?%+_HK3cayg$55$LSft3MPP C: </domain:pw> C: </domain:authInfo> C: </domain:transfer> C: </transfer> C: <clTRID>ABC-12345</clTRID> C: </command> C:</epp> Upon successful completion of the transfer, the registry MUST automatically unset the authorization information. If the transfer request is not submitted within the TTL or the transfer is canceled or rejected, the registrar MUST unset the authorization information, as described in .

Transition Considerations The goal of the transition considerations is to minimize the impact to the registrars in supporting the Secure Authorization Information Model defined in this document by supporting incremental transition steps. The transition steps are dependent on the starting point of the registry. Registries may have different starting points, since some of the elements of the Secure Authorization Information Model may have already been implemented. The considerations assume a starting point, referred to as the "Classic Authorization Information Model", which incorporates the following steps for management of the authorization information for transfers:

1. The registrant requests to register the object with the registrar. The registrar sends the <create> command, with a non-empty authorization information value, to the registry. The registry stores the authorization information as an encrypted value and requires a non-empty authorization information value for the life of the object. The registrar may store the long-lived authorization information.
2. At the time of transfer, the registrant requests from the losing registrar the authorization information to provide to the gaining registrar.
3. The losing registrar retrieves the locally stored authorization information or queries the registry for authorization information using the <info> command, and provides it to the registrant. If the registry is queried, the authorization information is decrypted and the plain-text authorization information is returned in the info response to the registrar.
4. The registrant provides the authorization information value to the gaining registrar.
5. The gaining registrar optionally verifies the authorization information with the <info> command to the registry, by passing the authorization information in the <info> command to the registry.
6. The gaining registrar sends the transfer request with the authorization information to the registry. The registry will decrypt the stored authorization information to compare to the passed authorization information.
7. If the transfer completes successfully, the authorization information is not touched by the registry and may be updated by the gaining registrar using the <update> command. If the transfer is canceled or rejected, the losing registrar may reset the authorization information using the <update> command.

The gaps between the Classic Authorization Information Model and the Secure Authorization Information Model include the following:

1. Registry requirement for a non-empty authorization information value on create and for the life of the object versus the authorization information not being set on create and only being set when a transfer is in process.
2. Registry not allowing the authorization information to be unset versus providing support for unsetting the authorization information in the <update> command.
3. Registry storing the authorization information as an encrypted value versus a hashed value.
4. Registry support for returning the authorization information versus not returning the authorization information in the info response.
5. Registry not touching the authorization information versus the registry automatically unsetting the authorization information upon a successful transfer.
6. Registry possibly validating a shorter authorization information value using password complexity rules versus validating the randomness of a longer authorization information value that meets the required bits of entropy.

The transition can be handled in the three phases defined in Sections , , and .

Transition Phase 1 - Features The goal of "Transition Phase 1 - Features" is to implement the needed features in EPP so that the registrar can optionally implement the Secure Authorization Information Model. The features to implement are broken out by the commands and responses below:

<Create> Command:

Change the <create> command to make the authorization information optional, by allowing both a non-empty value and an empty value. This enables a registrar to optionally create objects without an authorization information value, as described in .

<Update> Command:

Change the <update> command to allow unsetting the authorization information, as described in . This enables the registrar to optionally unset the authorization information when the TTL expires or when the transfer is canceled or rejected.

Transfer Approve Command and Transfer Auto-Approve:

Change the transfer approve command and the transfer auto-approve to automatically unset the authorization information. This sets the default state of the object to not have the authorization information set. The registrar implementing the Secure Authorization Information Model will not set the authorization information for an inbound transfer, and the registrar implementing the Classic Authorization Information Model will set the new authorization information upon a successful transfer.

Info Response:

Change the <info> command to not return the authorization information in the info response, as described in . This sets up the implementation of "Transition Phase 2 - Storage" (), since the dependency on returning the authorization information in the info response will be removed. This feature is the only one that is not an optional change to the registrar, and this change could potentially break the client, so it's recommended that the registry provide notice of the change.

<Info> Command and Transfer Request:

Change the <info> command and the transfer request to ensure that a registrar cannot get an indication that the authorization information is set or not set by returning the EPP error result code of 2202 when comparing a passed authorization to a non-matching set authorization information value or an unset value.

Transition Phase 2 - Storage The goal of "Transition Phase 2 - Storage" is to transition the registry to use hashed authorization information instead of encrypted authorization information. There is no direct impact on the registrars, since the only visible indication that the authorization information has been hashed is that the set authorization information is not returned in the info response, as addressed in "Transition Phase 1 - Features". Transitioning the authorization information storage includes the following three steps:

Hash New Authorization Information Values:

Change the <create> command and the <update> command to hash rather than encrypt the authorization information.

Support Comparison against Encrypted or Hashed Authorization Information:

Change the <info> command and the <transfer> request command to be able to compare a passed authorization information value with either a hashed or encrypted authorization information value. This requires that the stored values be self-identifying as being in hashed or encrypted form.

Hash Existing Encrypted Authorization Information Values:

Convert the encrypted authorization information values stored in the registry database to hashed values. This update will not be visible to the registrar. The conversion can be done over a period of time, depending on registry policy.

Transition Phase 3 - Enforcement The goal of "Transition Phase 3 - Enforcement" is to complete the implementation of the Secure Authorization Information Model, by enforcing the following:

Disallow Authorization Information on <Create> Command:

Change the <create> command to not allow the passing of a non-empty authorization information value. This behavior could potentially break the client, so it's recommended that the registry provide notice of this change.

Validate the Strong Random Authorization Information:

Change the validation of the authorization information in the <update> command to ensure at least 128 bits of entropy.

IANA Considerations

XML Namespace This document uses URNs to describe XML namespaces conforming to the registry mechanism described in . IANA has assigned the following URI in the "ns" subregistry within the "IETF XML Registry" for secure authorization information for the transfer namespace:

URI:

urn:ietf:params:xml:ns:epp:secure-authinfo-transfer-1.0

Registrant Contact:

IESG

XML:

None. Namespace URIs do not represent an XML specification.

EPP Extension Registry IANA has registered the EPP operational practice described in this document in the "Extensions for the Extensible Provisioning Protocol (EPP)" registry as defined in . The details of the registration are as follows:

Name of Extension:

"Extensible Provisioning Protocol (EPP) Secure Authorization Information for Transfer"

Document status:

Standards Track

Reference:

RFC 9154

Registrant Name and Email Address:

IESG (iesg@ietf.org)

TLDs:

Any

IPR Disclosure:

None

Status:

Active

Notes:

None

Security Considerations defines the use of a secure random value for the generation of authorization information. The client SHOULD choose a length and set of characters that result in at least 128 bits of entropy. defines the use of an authorization information TTL. The registrar SHOULD only set the authorization information during the transfer process by setting the authorization information at the start of the transfer process and unsetting the authorization information at the end of the transfer process. The TTL value is left up to registrar policy, and the sponsoring registrar MUST inform the registrant of the TTL when providing the authorization information to the registrant. defines the storage and transport of authorization information. The losing registrar MUST NOT store the authorization information and the gaining registrar MUST only store the authorization information as a "transient" value during the transfer process, where the authorization information MUST NOT be stored after the end of the transfer process. The registry MUST store the authorization information using a one-way cryptographic hash of at least 256 bits and with a per-authorization information random salt with at least 128 bits. All communication that includes the authorization information MUST be over an encrypted channel. The plain-text authorization information MUST NOT be written to any logs by the registrar or the registry. defines the matching of the authorization information values. The registry stores an unset authorization information value as a NULL (undefined) value to ensure that an empty input authorization information value never matches it. The method used to define a NULL (undefined) value is database specific.

References Normative References In many standards track documents several words are used to signify the requirements in the specification. These words are often capitalized. This document defines these words as they should be interpreted in IETF documents. This document specifies an Internet Best Current Practices for the Internet Community, and requests discussion and suggestions for improvements. This document describes an IANA maintained registry for IETF standards which use Extensible Markup Language (XML) related items such as Namespaces, Document Type Declarations (DTDs), Schemas, and Resource Description Framework (RDF) Schemas. Security systems are built on strong cryptographic algorithms that foil pattern analysis attempts. However, the security of these systems is dependent on generating secret quantities for passwords, cryptographic keys, and similar quantities. The use of pseudo-random processes to generate secret quantities can result in pseudo-security. A sophisticated attacker may find it easier to reproduce the environment that produced the secret quantities and to search the resulting small set of possibilities than to locate the quantities in the whole of the potential number space. Choosing random quantities to foil a resourceful and motivated adversary is surprisingly difficult. This document points out many pitfalls in using poor entropy sources or traditional pseudo-random number generation techniques for generating such quantities. It recommends the use of truly random hardware techniques and shows that the existing hardware on many systems can be used for this purpose. It provides suggestions to ameliorate the problem when a hardware solution is not available, and it gives examples of how large such quantities need to be for some applications. This document specifies an Internet Best Current Practices for the Internet Community, and requests discussion and suggestions for improvements. This document describes an application-layer client-server protocol for the provisioning and management of objects stored in a shared central repository. Specified in XML, the protocol defines generic object management operations and an extensible framework that maps protocol operations to objects. This document includes a protocol specification, an object mapping template, and an XML media type registration. This document obsoletes RFC 4930. [STANDARDS-TRACK] This document describes an Extensible Provisioning Protocol (EPP) mapping for the provisioning and management of Internet domain names stored in a shared central repository. Specified in XML, the mapping defines EPP command syntax and semantics as applied to domain names. This document obsoletes RFC 4931. [STANDARDS-TRACK] This document describes an Extensible Provisioning Protocol (EPP) mapping for the provisioning and management of individual or organizational social information identifiers (known as "contacts") stored in a shared central repository. Specified in Extensible Markup Language (XML), the mapping defines EPP command syntax and semantics as applied to contacts. This document obsoletes RFC 4933. [STANDARDS-TRACK] This document describes how an Extensible Provisioning Protocol (EPP) session is mapped onto a single Transmission Control Protocol (TCP) connection. This mapping requires use of the Transport Layer Security (TLS) protocol to protect information exchanged between an EPP client and an EPP server. This document obsoletes RFC 4934. [STANDARDS-TRACK] RFC 2119 specifies common key words that may be used in protocol specifications. This document aims to reduce the ambiguity by clarifying that only UPPERCASE usage of the key words have the defined special meanings. The Domain Name System (DNS) is defined in literally dozens of different RFCs. The terminology used by implementers and developers of DNS protocols, and by operators of DNS systems, has sometimes changed in the decades since the DNS was first defined. This document gives current definitions for many of the terms used in the DNS in a single document. This document obsoletes RFC 7719 and updates RFC 2308. World Wide Web Consortium Recommendation REC-xml-20081126 Informative References National Institute of Standards and Technology, U.S. Department of Commerce National Institute of Standards and Technology, U.S. Department of Commerce The Extensible Provisioning Protocol (EPP) includes features to add functionality by extending the protocol. It does not, however, describe how those extensions are managed. This document describes a procedure for the registration and management of extensions to EPP, and it specifies a format for an IANA registry to record those extensions.

Acknowledgements The authors wish to thank the following persons for their feedback and suggestions: , , , , , , , , , and .

Authors' Addresses Verisign, Inc.

12061 Bluemont Way Reston VA 20190 United States of America jgould@verisign.com https://www.verisign.com

Verisign, Inc.

12061 Bluemont Way Reston VA 20190 United States of America 4rickwilhelm@gmail.com https://www.verisign.com