What is crossdev
----------------

crossdev is a cross-compiler environment generator for Gentoo.

It is useful for various purposes:

- build cross-compiler toolchain for an operating system
- build cross-compiler toolchain for embedded target (bare metal)
- cross-compile whole Gentoo on a new (or existing) target
- cross-compile your favourite tool for every target out there
  just to make sure it still compiles and works. Countless bugs
  were found and fixed like that :)

Crossdev nano HOWTO
-------------------

So you want to cross-compile a Gentoo package (say busybox to s390x):

  # crossdev -t s390x-unknown-linux-gnu
  # (optional) ARCH=s390 PORTAGE_CONFIGROOT=/usr/s390x-unknown-linux-gnu eselect profile set default/linux/s390/17.0/s390x
  # USE=static s390x-unknown-linux-gnu-emerge -v1 busybox
  # file /usr/s390x-unknown-linux-gnu/bin/busybox
  /usr/s390x-unknown-linux-gnu/bin/busybox: ELF 64-bit MSB executable, IBM S/390, version 1 (GNU/Linux), statically linked, for GNU/Linux 3.2.0, stripped

Done!

You can use qemu-user to run this binary:

  $ qemu-s390x -L /usr/s390x-unknown-linux-gnu/ /usr/s390x-unknown-linux-gnu/bin/busybox uname -m
  s390x

or even chroot to /usr/s390x-unknown-linux-gnu directory!

https://wiki.gentoo.org/wiki/Crossdev_qemu-static-user-chroot

Supported platforms
-------------------

Cross-compilation is fairly well supported to linux targets.
Windows is not too broken either.

Be prepared for rough corners. This doc will try to help you
understand what crossdev does and does not do.

A few examples of targets that worked today (produce running
executables or kernels if applies):

 aarch64-unknown-linux-gnu-7.3.0
 alpha-unknown-linux-gnu-7.3.0
 arm-none-eabi-7.3.0
 armv5tel-softfloat-linux-gnueabi-7.3.0
 armv7a-hardfloat-linux-gnueabi-7.3.0
 armv7a-unknown-linux-gnueabi-7.3.0
 avr-7.3.0
 hppa-unknown-linux-gnu-7.3.0
 hppa2.0-unknown-linux-gnu-7.3.0
 hppa64-unknown-linux-gnu-7.3.0
 i686-pc-gnu-7.3.0
 i686-w64-mingw32-7.3.0
 ia64-unknown-linux-gnu-7.3.0
 m68k-unknown-linux-gnu-7.3.0
 mips-unknown-linux-gnu-7.3.0
 mips64-unknown-linux-gnu-7.3.0
 mips64el-unknown-linux-gnu-7.3.0
 mipsel-unknown-linux-gnu-7.3.0
 mmix-7.3.0
 nios2-unknown-linux-gnu-7.3.0
 powerpc-unknown-linux-gnu-7.3.0
 powerpc64-unknown-linux-gnu-7.3.0
 powerpc64le-unknown-linux-gnu-7.3.0
 s390-unknown-linux-gnu-7.3.0
 s390x-unknown-linux-gnu-7.3.0
 sh4-unknown-linux-gnu-7.3.0
 sparc-unknown-linux-gnu-7.3.0
 sparc64-unknown-linux-gnu-7.3.0
 x86_64-HEAD-linux-gnu-7.3.0
 x86_64-UNREG-linux-gnu-7.3.0
 x86_64-pc-linux-gnu-7.3.0
 x86_64-w64-mingw32-7.3.0

A few more targets are likely to Just Work.
And many more can be made to work with a litle touch.

How crossdev works (high-level overview)
----------------------------------------

crossdev is a tiny shell wrapper around emerge tool. The wrapper
overrides a few variables to aim emerge at another target.

Crossdev leverages the following features of portage (and ::gentoo
ebulds):

- ability to override ROOT=/usr/<target> to install cross-compiled
  packages into a new root on a filesystem to avoid cluttering host.

- ability to override PORTAGE_CONFIGROOT=/usr/<target> to untangle
  from host's /etc/portage/ configuration. Namely crossdev populates
      /usr/<target>/etc/portage/
  with defaults suitable for cross-compiling (ARCH, KERNEL, ELIBC
  variables and so on). You can change all of them.

- set CBUILD/CHOST/CTARGET variables accordingly to force build
  system into cross-compiling mode. For autotools-based system
  it means running ./configure script using following options:
    ./configure --build=${CBUILD} --host=${CHOST} --target=${CTARGET} ...

If toolchains were simple programs crossdev would be a one-liner script:

  ARCH=...    \
  CBUILD=...  \
  CHOST=...   \
  CTARGET=... \
  ROOT=...    \
      emerge "$@"

Unfortunately todays' toolchains have loops in their build-time dependencies:

- cross-compiler itself normally needs a libc built for <target> because
  libc defines various aspects of userland ABI and features provided.
- and libc is written in C and thus needs a cross-compiler to be built for
  <target>.

That's where crossdev comes in useful. It unties this vicious compiler<->libc
circle by carefully running the following emerge commands (assume s390x
example).

Here is what crossdev actually does:

1. create an overlay with new ebuilds (symlinks to existing ebuilds)
2. build cross-binutils:
   $ emerge cross-s390x-unknown-linux-gnu/binutils
3. Install system headers (kernel headers and libc headers):
   $ USE="headers-only" emerge cross-s390x-unknown-linux-gnu/linux-headers
   $ USE="headers-only" emerge cross-s390x-unknown-linux-gnu/glibc
4. Build minimal GCC without libc support (not able to link final
   executables yet)
   $ USE="-*" emerge cross-s390x-unknown-linux-gnu/gcc
5. Build complete libc (gcc will need crt.o files)
   $ emerge cross-s390x-unknown-linux-gnu/linux-headers
   $ emerge cross-s390x-unknown-linux-gnu/glibc
6. Build full GCC (able to link final binaries for C and C++)
   $ emerge cross-s390x-unknown-linux-gnu/gcc

Done!

How crossdev works (more details)
---------------------------------

This section contains more details on what actually happens.
Here we elaborate on each step outlined in previous section:

1. create an overlay with new ebuilds (symlinks to existing ebuilds)
   <skipping numeruos mkdir and ln commands>. After this step the
   outcomes are:

   - overlay layout is formed in cross-overlay/:

     $ ls -l cross-overlay/cross-s390x-unknown-linux-gnu
     binutils -> /gentoo-ebuilds/gentoo/sys-devel/binutils
     gcc -> /gentoo-ebuilds/gentoo/sys-devel/gcc
     glibc -> /gentoo-ebuilds/gentoo/sys-libs/glibc
     linux-headers -> /gentoo-ebuilds/gentoo/sys-kernel/linux-headers

   - /usr/cross-s390x-unknown-linux-gnu (aka $SYSROOT) layout is set:

     $ ls -l /usr/s390x-unknown-linux-gnu/etc/portage/
     make.conf
     make.profile -> /gentoo-ebuilds/gentoo/profiles/embedded
     profile/

     Here we override ARCH, LIBC, KERNEL, CBUILD, CHOST, CTARGET and a
     few other variables.

   - a few convenience wrappers are created:

     /usr/bin/s390x-unknown-linux-gnu-emerge -> cross-emerge
     /usr/bin/s390x-unknown-linux-gnu-pkg-config -> cross-pkg-config
     /usr/bin/s390x-unknown-linux-gnu-fix-root -> cross-fix-root

   This way we share ebuild code and still can install cross-compilers
   independently. Each with it's own version of libc.

2. build cross-binutils
   # emerge cross-s390x-unknown-linux-gnu/binutils

   This way we can install the same version of binutils aiming at
   a new target. As a result we get tools like:
   s390x-unknown-linux-gnu-ar (static library archiver)
   s390x-unknown-linux-gnu-as (assembler)
   s390x-unknown-linux-gnu-ld (linker)
   ... <many others>

   Nothing special here.

3. Install minimal set of system headers (kernel and libc)
   $ USE="headers-only" emerge cross-s390x-unknown-linux-gnu/linux-headers
   $ USE="headers-only" emerge cross-s390x-unknown-linux-gnu/glibc

   As we don't have cross-compiler yet ebuilds just copy a bunch of
   header files into
       /usr/s390x-unknown-linux-gnu/usr/include
   and setup symlinks like:
       /usr/s390x-unknown-linux-gnu/sys-include -> usr/include
   to make cross-gcc happy.

   These include symlinks are target-dependent. A few unusual examples:

   - windows (mingw): /usr/x86_64-w64-mingw32/mingw -> usr
   - hurd: /usr/i686-pc-gnu/include -> usr/include
   - DOS: /usr/i686-pc-gnu/dev/env/DJDIR/include -> ../../../usr/include

   Side note: we could have omited symlink creation completely
   and build gcc with parameter:
     --with-native-system-header-dir=${EPREFIX}/usr/include
   That way ${SYSROOT} directory contents would be even more like normal
   root. Worth a try! TODO: actually do it.

4. Build minimal GCC without libc support (not able to link final executables
   yet)
   # USE="-*" emerge cross-s390x-unknown-linux-gnu/gcc

   Here gcc uses headers from step [3.] to find out what target libc can do:

   - POSIX support
   - trigonometry functions
   - threading
   - vital constants

   As a result we only get C code generator. No knowledge of how to link
   executables or shared libraries as those require bits of libc.

   For tiniest targets (bare-metal) this can be a final step to get basic
   C toolchain.

5. Build complete libc
   # emerge cross-s390x-unknown-linux-gnu/linux-headers
   # emerge cross-s390x-unknown-linux-gnu/glibc

   Here we build full libc against system headers. As a result we get C
   startup files (crt.o) and can now link full C programs!

6. Build full GCC (able to link final binaries for C and C++)
   # USE="" emerge cross-s390x-unknown-linux-gnu/gcc

   Here we get full C++ support, various default flags enabled (pie,
   sanitizers, stack protectors and others).

   The final result is ready for large-scale operations.

Various notes (AKA dirty little tricks)
---------------------------------------

- config.site

  Some ./configure scripts rely on runtime feature testing. We would
  still like to enable things even in cross-environment.

  crossdev installs /usr/share/config.site with a bunch of cache
  variables preset for targets. It might be a nice place to drop
  more things into. Or it could be a source of all your cross-compilation
  problems if variables set incorrect values.

- eclass importing

  To find out various things about target crossdev loads multilib.eclass
  and tries to find out default ABI supported by the target.

- crossdev is just a tiny shell script around emerge :)

  It's full source code is comparable to the size of this README.

- USE=headers-only

  Many toolchain ebuilds (libcs and kernel headers) are aware of
  headers-only install specifically for crossdev and similar tools
  to be able to build cross-toolchains.

- How to test crossdev layout generation:

  $ mkdir -p foo
  $ PORTAGE_CONFIGROOT=$(pwd)/foo EPREFIX=$(pwd)/foo ./crossdev -t mmix -P -p

  This needs some local patching. TODO: fix it to Just Work (perhaps with
  additional --test options).

Happy cross-compiling!
