]> Isode Limited

alexey.melnikov@isode.com https://www.isode.com

Yahoo!

arunprakash@myyahoo.com

Yahoo!

nvikram_imap@yahoo.com

luis.alves@lafaspot.com

art extra The PARTIAL extension of the Internet Message Access Protocol (see RFCs 3501 and 9051) allows clients to limit the number of SEARCH results returned, as well as to perform incremental (paged) searches. This also helps servers to optimize resource usage when performing searches. This document extends the PARTIAL SEARCH return option originally specified in RFC 5267. It also clarifies some interactions between RFC 5267 and RFCs 4731 and 9051. This document updates RFCs 4731 and 5267.

Introduction and Overview This document defines an extension to the Internet Message Access Protocol for performing incremental searches and fetches. This extension is compatible with both IMAP4rev1 and IMAP4rev2 . This extension uses IMAP extensibility rules defined in . The PARTIAL extension of the Internet Message Access Protocol allows clients to limit the number of SEARCH results returned, as well as to perform incremental (paged) searches. This also helps servers to optimize resource usage when performing searches. This document extends the PARTIAL SEARCH return option originally specified in RFC 5267. It also clarifies some interactions between RFC 5267 and RFCs 4731 and 9051.

Document Conventions In protocol examples, this document uses a prefix of "C: " to denote lines sent by the client to the server and "S: " for lines sent by the server to the client. Lines prefixed with "// " are comments explaining the previous protocol line. These prefixes and comments are not part of the protocol. Lines without any of these prefixes are continuations of the previous line, and no line breaks are present in the protocol unless specifically mentioned. The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 when, and only when, they appear in all capitals, as shown here. Other capitalized words are IMAP key words or key words from this document.

The PARTIAL Extension An IMAP server advertises support for the PARTIAL extension by including the "PARTIAL" capability in the CAPABILITY response / response code.

Incremental SEARCH and Partial Results The PARTIAL SEARCH return option causes the server to provide in an ESEARCH response a subset of the results denoted by the sequence range given as the mandatory argument. The first result (message with the lowest matching Unique Identifier (UID)) is 1; thus, the first 500 results would be obtained by a return option of "PARTIAL 1:500" and the second 500 by "PARTIAL 501:1000". This intentionally mirrors message sequence numbers. It is also possible to direct the server to start the SEARCH from the latest matching (with the highest UID) message. This can be done by prepending "-" to the index. For example, -1 is the last message, -2 is next to the last, and so on. Using this syntax helps server implementations to optimize their SEARCHes. A single command MUST NOT contain more than one PARTIAL or ALL search return option; that is, either one PARTIAL, one ALL, or neither PARTIAL nor ALL is allowed. For SEARCH results, the entire list of results MUST be ordered in mailbox order -- that is, in UID or message sequence number order. In cases where a PARTIAL SEARCH return option references results that do not exist by using a range that starts or ends higher (or lower) than the current number of results, the server returns the results that are in the set. This yields a PARTIAL return data item that has, as payload, the original range and a potentially missing set of results that may be shorter than the extent of the range. If the whole range references results that do not exist, a special value "NIL" is returned by the server instead of the sequence set. Clients need not request PARTIAL results in any particular order. Because mailboxes may change, clients might wish to use PARTIAL in combination with UPDATE (see ) if the server also advertises the "CONTEXT=SEARCH" capability, especially if the intent is to walk a large set of results; however, these return options do not interact -- the UPDATE will provide notifications for all matching results.

Interaction between PARTIAL, MIN, MAX, and SAVE SEARCH Return Options This section only applies if the server advertises the "PARTIAL" IMAP capability or "CONTEXT=SEARCH" , together with "ESEARCH" and/or IMAP4rev2 . The SAVE result option doesn't change whether the server would return items corresponding to PARTIAL SEARCH result options. As specified in , it is an error to specify both the PARTIAL and ALL result options in the same SEARCH command. When the SAVE result option is combined with the PARTIAL result option and none of the MIN/MAX/COUNT result options are present, the corresponding PARTIAL is returned, and the "$" marker would contain references to all messages returned by the PARTIAL result option. When the SAVE and PARTIAL result options are combined with the MIN or MAX result option and the COUNT result option is absent, the corresponding PARTIAL result and MIN/MAX are returned (if the SEARCH result is not empty), and the "$" marker would contain references to all messages returned by the PARTIAL result option together with the corresponding MIN/MAX message. If the SAVE and PARTIAL result options are combined with both the MIN and MAX result options and the COUNT result option is absent, the PARTIAL, MIN, and MAX result options are returned (if the SEARCH result is not empty), and the "$" marker would contain references to all messages returned by the PARTIAL result option together with the MIN and MAX messages. If the SAVE and PARTIAL result options are combined with the COUNT result option, the PARTIAL and COUNT result options are returned, and the "$" marker would always contain references to all messages found by the SEARCH or UID SEARCH command. summarizes additional requirements for ESEARCH server implementations described in this section. Note regarding : "[m]" means optional "MIN" and/or "MAX".

Combination of Result Options	"$" Marker Value
SAVE PARTIAL	PARTIAL
SAVE PARTIAL MIN	PARTIAL & MIN
SAVE PARTIAL MAX	PARTIAL & MAX
SAVE PARTIAL MIN MAX	PARTIAL & MIN & MAX
SAVE PARTIAL COUNT [m]	all found messages

Extension to UID FETCH The PARTIAL extension also extends the UID FETCH command with a PARTIAL FETCH modifier. The PARTIAL FETCH modifier has the same syntax as the PARTIAL SEARCH result option. The presence of the PARTIAL FETCH modifier instructs the server to only return FETCH results for messages in the specified range. It is useful when the sequence-set (first) parameter in the UID FETCH command includes an unknown number of messages.

Use of "PARTIAL" and "CONDSTORE" IMAP Extensions Together This section is informative. The PARTIAL FETCH modifier can be combined with the CHANGEDSINCE FETCH modifier . The above example causes the server to first select the last 30 messages and then only return flag changes for a subset of those messages that have MODSEQ higher than 98305. Note that the order of PARTIAL and CHANGEDSINCE FETCH modifiers in the UID FETCH command is not important, i.e., the above example can also use the "UID FETCH 25900:26600 (UID FLAGS) (CHANGEDSINCE 98305 PARTIAL -1:-30)" command and it would result in the same responses.

Formal Syntax The following syntax specification uses the Augmented Backus-Naur Form (ABNF) notation as specified in . Non-terminals referenced but not defined below are as defined by IMAP4rev1 or IMAP4rev2. Except as noted otherwise, all alphabetic characters are case insensitive. The use of uppercase or lowercase characters to define token strings is for editorial clarity only. Implementations MUST accept these strings in a case-insensitive fashion. MINUS = "-" capability =/ "PARTIAL" ;; from [RFC3501]. modifier-partial = "PARTIAL" SP partial-range partial-range-first = nz-number ":" nz-number ;; Request to search from oldest (lowest UIDs) to ;; more recent messages. ;; A range 500:400 is the same as 400:500. ;; This is similar to from [RFC3501] ;; but cannot contain "*". partial-range-last = MINUS nz-number ":" MINUS nz-number ;; Request to search from newest (highest UIDs) to ;; oldest messages. ;; A range -500:-400 is the same as -400:-500. partial-range = partial-range-first / partial-range-last search-return-opt =/ modifier-partial ;; All conform to from ;; [RFC4466] and [RFC9051]. search-return-data =/ ret-data-partial ret-data-partial = "PARTIAL" SP "(" partial-range SP partial-results ")" ;; is the requested range. partial-results = sequence-set / "NIL" ;; from [RFC3501]. ;; NIL indicates that no results correspond to ;; the requested range. tagged-ext-simple =/ partial-range-last fetch-modifier =/ modifier-partial ;; from [RFC4466]. ]]>

Security Considerations This document defines an additional IMAP4 capability. As such, it does not change the underlying security considerations of IMAP4rev1 and IMAP4rev2 . The authors and reviewers believe that no new security issues are introduced with these additional IMAP4 capabilities. This document defines an optimization that can reduce both the amount of work performed by the server and the amount of data returned to the client. Use of this extension is likely to cause the server and the client to use less memory than when the extension is not used. However, as this is going to be new code in both the client and the server, rigorous testing of such code is required in order to avoid introducing new implementation bugs.

IANA Considerations

Changes/Additions to the IMAP Capabilities Registry IMAP4 capabilities are registered by publishing a Standards Track or IESG-approved Informational or Experimental RFC. The registry is currently located at . IANA has added the PARTIAL extension to the "IMAP Capabilities" registry with RFC 9394 as the reference.

References Normative References Informative References

Acknowledgments This document was motivated by the Yahoo! team and their questions about best client practices for dealing with large mailboxes. The authors of this document would like to thank the following people, who provided useful comments or participated in discussions of this document: and . This document uses a lot of text from RFC 5267. Thus, the work of the RFC 5267 authors -- and -- is appreciated.