A YANG Data Model for Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) Proxy Devices

Introduction This document defines a YANG data model for the management of Internet Group Management Protocol (IGMP) or Multicast Listener Discovery (MLD) Proxy devices . The YANG module in this document conforms to the Network Management Datastore Architecture as defined in .

Terminology The terminology for describing YANG data models is found in and , including:

augment
data model
data node
identity
module

The following abbreviations are used in this document and in the defined YANG data model:

IGMP:: Internet Group Management Protocol .
MLD:: Multicast Listener Discovery .
PIM:: Protocol Independent Multicast .

Tree Diagrams Tree diagrams used in this document follow the notation defined in .

Prefixes in Data Node Names In this document, names of data nodes and other data model objects are often used without a prefix, as long as the context clearly indicates the YANG module in which each name is defined. Otherwise, names are prefixed using the standard prefix associated with the corresponding YANG module, as shown in . Prefixes and Corresponding YANG Modules

Prefix	YANG Module	Reference
inet	ietf-inet-types
if	ietf-interfaces
rt	ietf-routing
rt-types	ietf-routing-types
pim-base	ietf-pim-base

Design of Data Model The model covers forwarding based on IGMP and MLD proxying . One goal of this document is to define a data model that provides a common user interface for IGMP/MLD Proxy devices.

Overview The model defined in this document has all the common building blocks for IGMP/MLD Proxy devices and can be used to configure those devices. The operational state data and statistics can also be retrieved via this model.

Optional Features This model is designed to represent the basic capability subsets of IGMP/MLD Proxies. The main design goals of this document are that (1) the basic capabilities described in the model will be supported by any major implementations that exist at the time of this writing and (2) the configuration of all implementations meeting the specifications will be easy to express through some combination of the optional features in the model and simple vendor augmentations. This model declares two features representing capabilities that not all deployed devices support. One feature is called "igmp-proxy", and the other feature is called "mld-proxy". Either or both features could be implemented; this would provide more choices for vendors.

Position of Address Family in Hierarchy IGMP Proxies only support IPv4, while MLD Proxies only support IPv6. The data model defined in this document can be used for both IPv4 and IPv6 address families. This document defines IGMP Proxies and MLD Proxies in separate schema branches in the structure. The benefits of this technique are as follows:

The model can support IGMP Proxies (IPv4), MLD Proxies (IPv6), or both, optionally and independently. Such flexibility cannot be achieved cleanly with a combined branch.
The structure is consistent with other YANG data models such as the model defined in , which uses separate branches for IPv4 and IPv6.
Having separate branches for IGMP Proxies and MLD Proxies allows minor differences in their behavior to be modeled more simply and cleanly. The two branches can better support different features and node types.

Module Structure This model augments the core routing data model specified in . The "igmp-proxy" container instantiates an IGMP Proxy. The "mld-proxy" container instantiates an MLD Proxy.

IGMP Proxy Configuration and Operational State The YANG module augments /rt:routing/rt:control-plane-protocols/rt:control-plane-protocol to add the igmp-proxy container. All attributes related to IGMP Proxies are defined in the igmp-proxy container. The read-write attributes represent configurable data. The read-only attributes represent state data. The igmp-version parameter represents the IGMP protocol version; the default value is 2. If the value of the "enabled" parameter is "true", it means that the IGMP Proxy is enabled. The interface list under igmp-proxy contains upstream interfaces for an IGMP Proxy. A constraint is provided to make sure that the upstream interface for the IGMP Proxy is not configured to use PIM. To configure a downstream interface for an IGMP Proxy, the ability to enable IGMP on that interface is needed. This is defined in "" .

MLD Proxy Configuration and Operational State The YANG module augments /rt:routing/rt:control-plane-protocols/rt:control-plane-protocol to add the mld-proxy container. All attributes related to MLD Proxies are defined in the mld-proxy container. The read-write attributes represent configurable data. The read-only attributes represent state data. The mld-version parameter represents the MLD protocol version; the default value is 2. If the value of the "enabled" parameter is "true", it means that the MLD Proxy is enabled. The interface list under mld-proxy contains upstream interfaces for an MLD Proxy. A constraint is provided to make sure that the upstream interface for the MLD Proxy is not configured to use PIM. To configure a downstream interface for an MLD Proxy, enable MLD on that interface. This is defined in "" .

IGMP/MLD Proxy YANG Module This module references , , , , , and . WG List: Editors: Hongji Zhao Xufeng Liu Yisong Liu Mani Panchanathan Mahesh Sivakumar "; description "This module defines a collection of YANG definitions common for all Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) Proxy devices. Copyright (c) 2023 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Revised BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info). This version of this YANG module is part of RFC 9398; see the RFC itself for full legal notices."; revision 2023-05-30 { description "Initial revision."; reference "RFC 9398: A YANG Data Model for Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) Proxy Devices"; } /* * Features */ feature igmp-proxy { description "Support for the IGMP Proxy protocol."; reference "RFC 4605: Internet Group Management Protocol (IGMP) / Multicast Listener Discovery (MLD)-Based Multicast Forwarding ('IGMP/MLD Proxying')"; } feature mld-proxy { description "Support for the MLD Proxy protocol."; reference "RFC 4605: Internet Group Management Protocol (IGMP) / Multicast Listener Discovery (MLD)-Based Multicast Forwarding ('IGMP/MLD Proxying')"; } /* * Identities */ identity igmp-proxy { base rt:control-plane-protocol; description "IGMP Proxy protocol."; } identity mld-proxy { base rt:control-plane-protocol; description "MLD Proxy protocol."; } /* * Groupings */ grouping per-interface-config-attributes { description "'config' attributes as listed under an interface entry."; leaf enabled { type boolean; default "true"; description "Set the value to 'true' to enable the IGMP/MLD Proxy."; } } // per-interface-config-attributes grouping state-group-attributes { description "State group attributes."; leaf up-time { type uint32; units "seconds"; description "The elapsed time for (S,G) or (*,G)."; } leaf filter-mode { type enumeration { enum include { description "In 'include' mode, reception of packets sent to the specified multicast address is requested only from those IP source addresses listed in the 'source' list parameter."; } enum exclude { description "In 'exclude' mode, reception of packets sent to the given multicast address is requested from all IP source addresses except those listed in the 'source' list parameter."; } } mandatory true; description "Filter mode for a multicast group. May be either 'include' or 'exclude'."; } } // state-group-attributes /* augments */ augment "/rt:routing/rt:control-plane-protocols" + "/rt:control-plane-protocol" { when "derived-from-or-self(rt:type, " + "'igmp-mld-proxy:igmp-proxy')" { description "This augmentation is only valid for IGMP Proxies."; } description "IGMP Proxy augmentation to routing control plane protocol configuration and state."; container igmp-proxy { if-feature "igmp-proxy"; presence "IGMP Proxy configuration."; description "IGMP Proxy instance configuration."; container interfaces { description "Contains a list of upstream interfaces."; list interface { key "name"; description "List of upstream interfaces."; leaf name { type if:interface-ref; must 'not( current() = /rt:routing' + '/rt:control-plane-protocols/pim-base:pim' + '/pim-base:interfaces/pim-base:interface' + '/pim-base:name )' { description "The upstream interface for the IGMP Proxy must not be configured to use PIM."; } description "The upstream interface name."; } leaf igmp-version { type uint8 { range "1..3"; } default "2"; description "IGMP version."; } uses per-interface-config-attributes; leaf sender-source-address { type inet:ipv4-address-no-zone; description "The sender source address of an IGMP membership report message or leave message."; } list group { key "group-address"; config false; description "List of the multicast groups in the membership database built on this upstream interface."; leaf group-address { type rt-types:ipv4-multicast-group-address; description "Multicast group address."; } uses state-group-attributes; list source { key "source-address"; description "Multicast source information for the multicast group."; leaf source-address { type inet:ipv4-address-no-zone; description "Multicast source address."; } leaf up-time { type uint32; units "seconds"; description "The elapsed time for (S,G) or (*,G)."; } list downstream-interface { key "name"; description "List of downstream interfaces."; leaf name { type if:interface-ref; description "Downstream interfaces for each upstream interface."; } } } // list source } // list group } // interface } // interfaces } } augment "/rt:routing/rt:control-plane-protocols" + "/rt:control-plane-protocol" { when "derived-from-or-self(rt:type, " + "'igmp-mld-proxy:mld-proxy')" { description "This augmentation is only valid for MLD Proxies."; } description "MLD Proxy augmentation to routing control plane protocol configuration and state."; container mld-proxy { if-feature "mld-proxy"; presence "MLD Proxy configuration."; description "MLD Proxy instance configuration."; container interfaces { description "Contains a list of upstream interfaces."; list interface { key "name"; description "List of upstream interfaces."; leaf name { type if:interface-ref; must 'not( current() = /rt:routing' + '/rt:control-plane-protocols/pim-base:pim' + '/pim-base:interfaces/pim-base:interface' + '/pim-base:name )' { description "The upstream interface for the MLD Proxy must not be configured to use PIM."; } description "The upstream interface name."; } leaf mld-version { type uint8 { range "1..2"; } default "2"; description "MLD version."; } uses per-interface-config-attributes; leaf sender-source-address { type inet:ipv6-address-no-zone; description "The sender source address of an MLD membership report message or leave message."; } list group { key "group-address"; config false; description "List of the multicast groups in the membership database built on this upstream interface."; leaf group-address { type rt-types:ipv6-multicast-group-address; description "Multicast group address."; } uses state-group-attributes; list source { key "source-address"; description "Multicast source information for the multicast group."; leaf source-address { type inet:ipv6-address-no-zone; description "Multicast source address."; } leaf up-time { type uint32; units "seconds"; description "The elapsed time for (S,G) or (*,G)."; } list downstream-interface { key "name"; description "List of downstream interfaces."; leaf name { type if:interface-ref; description "Downstream interfaces for each upstream interface."; } } } // list source } // list group } // interface } // interfaces } } } ]]>

Security Considerations The YANG module specified in this document defines a schema for data that is designed to be accessed via network management protocols such as NETCONF or RESTCONF . The lowest NETCONF layer is the secure transport layer, and the mandatory-to-implement secure transport is Secure Shell (SSH) . The lowest RESTCONF layer is HTTPS, and the mandatory-to-implement secure transport is TLS . The Network Configuration Access Control Model (NACM) provides the means to restrict access for particular NETCONF or RESTCONF users to a preconfigured subset of all available NETCONF or RESTCONF protocol operations and content. There are a number of data nodes defined in this YANG module that are writable/creatable/deletable (i.e., config true, which is the default). These data nodes may be considered sensitive or vulnerable in some network environments. Write operations (e.g., edit-config) to these data nodes without proper protection can have a negative effect on network operations. These are the subtrees and data nodes and their sensitivity/vulnerability: Under /rt:routing/rt:control-plane-protocols/rt:control-plane-protocol:/ igmp-mld-proxy:igmp-proxy:

igmp-mld-proxy:interfaces: This subtree specifies the interface list for an IGMP Proxy. Modifying the configuration may cause the IGMP Proxy interface to be deleted or changed.
igmp-mld-proxy:interfaces/interface: This subtree specifies the configuration for the IGMP Proxy attributes at the interface level. Modifying the configuration may cause the IGMP Proxy to be deleted or changed on a specific interface.

Under /rt:routing/rt:control-plane-protocols/rt:control-plane-protocol:/ igmp-mld-proxy:mld-proxy:

igmp-mld-proxy:interfaces: This subtree specifies the interface list for an MLD Proxy. Modifying the configuration may cause the MLD Proxy interface to be deleted or changed.
igmp-mld-proxy:interfaces/interface: This subtree specifies the configuration for the MLD Proxy attributes at the interface level. Modifying the configuration may cause the MLD Proxy to be deleted or changed on a specific interface.

Unauthorized access to any data nodes in these subtrees can adversely affect the IGMP/MLD Proxy subsystem of both the local device and the network. This may lead to network malfunctions, delivery of packets to inappropriate destinations, and other problems. Some of the readable data nodes in this YANG module may be considered sensitive or vulnerable in some network environments. It is thus important to control read access (e.g., via get, get-config, or notification) to these data nodes. These are the subtrees and data nodes and their sensitivity/vulnerability: Unauthorized access to any data nodes in these subtrees can disclose operational state information about the IGMP/MLD Proxy on this device. Group information or source information may expose multicast group memberships.

IANA Considerations

IETF XML Registry This document registers the following namespace URIs in the "IETF XML Registry" :

URI:: urn:ietf:params:xml:ns:yang:ietf-igmp-mld-proxy
Registrant Contact:: The IESG.
XML:: N/A; the requested URI is an XML namespace.

YANG Module Names Registry This document registers the following YANG module in the "YANG Module Names" registry :

Name:: ietf-igmp-mld-proxy
Namespace:: urn:ietf:params:xml:ns:yang:ietf-igmp-mld-proxy
Prefix:: igmp-mld-proxy
Reference:: RFC 9398

References Normative References Informative References

Data Tree Example This section contains an example for the IGMP Proxy, shown in JSON encoding and containing both configuration and state data. In the example, the IGMP Proxy is enabled on interface eth1/1. The ability to enable IGMP on eth1/2 and eth1/3 is also needed. The configuration details are omitted here because this document is focused on IGMP/MLD Proxies. The configuration data for R1 in the above figure could be as follows: The corresponding operational state data for R1 could be as follows: