module ietf-restconf-server {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-restconf-server";
prefix "rcs";
//import ietf-netconf-acm {
// prefix nacm;
// reference
// "RFC 6536: Network Configuration Protocol (NETCONF)
// Access Control Model";
//}
import ietf-inet-types {
prefix inet;
reference
"RFC 6991: Common YANG Data Types";
}
import ietf-x509-cert-to-name {
prefix x509c2n;
reference
"RFC 7407: A YANG Data Model for SNMP Configuration";
}
import ietf-tls-server {
prefix ts;
revision-date 2017-06-13; // stable grouping definitions
reference
"RFC ZZZZ: TLS Client and Server Models";
}
organization
"IETF NETCONF (Network Configuration) Working Group";
contact
"WG Web:
WG List:
WG Chair: Mehmet Ersue
WG Chair: Mahesh Jethanandani
Editor: Kent Watsen
";
description
"This module contains a collection of YANG definitions for
configuring RESTCONF servers.
Copyright (c) 2014 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD
License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX; see
the RFC itself for full legal notices.";
revision "2017-06-13" {
description
"Initial version";
reference
"RFC XXXX: RESTCONF Client and Server Models";
}
// Features
feature listen {
description
"The 'listen' feature indicates that the RESTCONF server
supports opening a port to accept RESTCONF client connections
using at least one transport (e.g., TLS, etc.).";
}
feature tls-listen {
description
"The 'tls-listen' feature indicates that the RESTCONF server
supports opening a port to listen for incoming RESTCONF
client connections.";
reference
"RFC XXXX: RESTCONF Protocol";
}
feature call-home {
description
"The 'call-home' feature indicates that the RESTCONF server
supports initiating RESTCONF call home connections to REETCONF
clients using at least one transport (e.g., TLS, etc.).";
reference
"RFC 8071: NETCONF Call Home and RESTCONF Call Home";
}
feature tls-call-home {
description
"The 'tls-call-home' feature indicates that the RESTCONF server
supports initiating connections to RESTCONF clients.";
reference
"RFC 8071: NETCONF Call Home and RESTCONF Call Home";
}
feature client-cert-auth {
description
"The client-cert-auth feature indicates that the RESTCONF
server supports the ClientCertificate authentication scheme.";
reference
"RFC ZZZZ: Client Authentication over New TLS Connection";
}
// top-level container
container restconf-server {
description
"Top-level container for RESTCONF server configuration.";
container listen {
if-feature listen;
description
"Configures listen behavior";
leaf max-sessions {
type uint16;
default 0; // should this be 'max'?
description
"Specifies the maximum number of concurrent sessions
that can be active at one time. The value 0 indicates
that no artificial session limit should be used.";
}
list endpoint {
key name;
description
"List of endpoints to listen for RESTCONF connections.";
leaf name {
type string;
description
"An arbitrary name for the RESTCONF listen endpoint.";
}
choice transport {
mandatory true;
description
"Selects between available transports.";
case tls {
if-feature tls-listen;
container tls {
description
"TLS-specific listening configuration for inbound
connections.";
leaf address {
type inet:ip-address;
description
"The IP address of the interface to listen on. The
TLS server will listen on all interfaces if no value
is specified. Please note that some addresses have
special meanings (e.g., '0.0.0.0' and '::').";
}
leaf port {
type inet:port-number;
default 443;
description
"The local port number on this interface the TLS server
listens on.";
}
uses ts:tls-server-grouping {
augment "client-auth" {
description
"Augments in the cert-to-name structure.";
uses cert-maps-grouping;
}
}
}
}
}
}
}
container call-home {
if-feature call-home;
description
"Configures call-home behavior";
list restconf-client {
key name;
description
"List of RESTCONF clients the RESTCONF server is to
initiate call-home connections to.";
leaf name {
type string;
description
"An arbitrary name for the remote RESTCONF client.";
}
choice transport {
mandatory true;
description
"Selects between TLS and any transports augmented in.";
case tls {
if-feature tls-call-home;
container tls {
description
"Specifies TLS-specific call-home transport
configuration.";
uses endpoints-container {
refine endpoints/endpoint/port {
default 4336;
}
}
uses ts:tls-server-grouping {
augment "client-auth" {
description
"Augments in the cert-to-name structure.";
uses cert-maps-grouping;
}
}
}
}
}
container connection-type {
description
"Indicates the RESTCONF client's preference for how the
RESTCONF server's connection is maintained.";
choice connection-type {
description
"Selects between available connection types.";
case persistent-connection {
container persistent {
presence true;
description
"Maintain a persistent connection to the RESTCONF
client. If the connection goes down, immediately
start trying to reconnect to it, using the
reconnection strategy.
This connection type minimizes any RESTCONF client
to RESTCONF server data-transfer delay, albeit at
the expense of holding resources longer.";
container keep-alives {
description
"Configures the keep-alive policy, to proactively
test the aliveness of the TLS client. An
unresponsive TLS client will be dropped after
approximately (max-attempts * max-wait)
seconds.";
reference
"RFC 8071: NETCONF Call Home and RESTCONF Call
Home, Section 3.1, item S6";
leaf max-wait {
type uint16 {
range "1..max";
}
units seconds;
default 30;
description
"Sets the amount of time in seconds after which
if no data has been received from the TLS
client, a TLS-level message will be sent to
test the aliveness of the TLS client.";
}
leaf max-attempts {
type uint8;
default 3;
description
"Sets the maximum number of sequential keep-alive
messages that can fail to obtain a response from
the TLS client before assuming the TLS client is
no longer alive.";
}
}
}
}
case periodic-connection {
container periodic {
presence true;
description
"Periodically connect to the RESTCONF client, so that
the RESTCONF client may deliver messages pending for
the RESTCONF server. The client must close the
connection when it's ready to release it. Once the
connection has been closed, the server will restart
its timer until the next connection.";
leaf reconnect-timeout {
type uint16 {
range "1..max";
}
units minutes;
default 60;
description
"The maximum amount of unconnected time the
RESTCONF server will wait before re-establishing
a connection to the RESTCONF client. The
RESTCONF server may initiate a connection to
the RESTCONF client before this time if desired
(e.g., to deliver a notification).";
}
}
}
}
}
container reconnect-strategy {
description
"The reconnection strategy directs how a RESTCONF server
reconnects to a RESTCONF client after after discovering
its connection to the client has dropped, even if due to
a reboot. The RESTCONF server starts with the specified
endpoint and tries to connect to it max-attempts times
before trying the next endpoint in the list (round
robin).";
leaf start-with {
type enumeration {
enum first-listed {
description
"Indicates that reconnections should start with
the first endpoint listed.";
}
enum last-connected {
description
"Indicates that reconnections should start with
the endpoint last connected to. If no previous
connection has ever been established, then the
first endpoint configured is used. RESTCONF
servers SHOULD be able to remember the last
endpoint connected to across reboots.";
}
}
default first-listed;
description
"Specifies which of the RESTCONF client's endpoints the
RESTCONF server should start with when trying to connect
to the RESTCONF client.";
}
leaf max-attempts {
type uint8 {
range "1..max";
}
default 3;
description
"Specifies the number times the RESTCONF server tries to
connect to a specific endpoint before moving on to the
next endpoint in the list (round robin).";
}
}
}
}
}
grouping cert-maps-grouping {
description
"A grouping that defines a container around the
cert-to-name structure defined in RFC 7407.";
container cert-maps {
uses x509c2n:cert-to-name;
description
"The cert-maps container is used by a TLS-based RESTCONF
server to map the RESTCONF client's presented X.509
certificate to a RESTCONF username. If no matching and
valid cert-to-name list entry can be found, then the
RESTCONF server MUST close the connection, and MUST NOT
accept RESTCONF messages over it.";
reference
"RFC XXXX: The RESTCONF Protocol";
}
}
grouping endpoints-container {
description
"This grouping is used by tls container for call-home
configurations.";
container endpoints {
description
"Container for the list of endpoints.";
list endpoint {
key name;
unique "address port";
min-elements 1;
ordered-by user;
description
"User-ordered list of endpoints for this RESTCONF client.
Defining more than one enables high-availability.";
leaf name {
type string;
description
"An arbitrary name for this endpoint.";
}
leaf address {
type inet:host;
mandatory true;
description
"The IP address or hostname of the endpoint. If a
hostname is configured and the DNS resolution results
in more than one IP address, the RESTCONF server
will process the IP addresses as if they had been
explicitly configured in place of the hostname.";
}
leaf port {
type inet:port-number;
description
"The IP port for this endpoint. The RESTCONF server will
use the IANA-assigned well-known port if no value is
specified.";
}
}
}
}
}