<?xml version="1.0" encoding="UTF-8"?>
<cvrfdoc xmlns="http://www.icasi.org/CVRF/schema/cvrf/1.1" xmlns:cvrf="http://www.icasi.org/CVRF/schema/cvrf/1.1">
	<DocumentTitle xml:lang="en">An update for kernel is now available for openEuler-22.03-LTS-SP4</DocumentTitle>
	<DocumentType>Security Advisory</DocumentType>
	<DocumentPublisher Type="Vendor">
		<ContactDetails>openeuler-security@openeuler.org</ContactDetails>
		<IssuingAuthority>openEuler security committee</IssuingAuthority>
	</DocumentPublisher>
	<DocumentTracking>
		<Identification>
			<ID>openEuler-SA-2024-2107</ID>
		</Identification>
		<Status>Final</Status>
		<Version>1.0</Version>
		<RevisionHistory>
			<Revision>
				<Number>1.0</Number>
				<Date>2024-09-06</Date>
				<Description>Initial</Description>
			</Revision>
		</RevisionHistory>
		<InitialReleaseDate>2024-09-06</InitialReleaseDate>
		<CurrentReleaseDate>2024-09-06</CurrentReleaseDate>
		<Generator>
			<Engine>openEuler SA Tool V1.0</Engine>
			<Date>2024-09-06</Date>
		</Generator>
	</DocumentTracking>
	<DocumentNotes>
		<Note Title="Synopsis" Type="General" Ordinal="1" xml:lang="en">kernel security update</Note>
		<Note Title="Summary" Type="General" Ordinal="2" xml:lang="en">An update for kernel is now available for openEuler-22.03-LTS-SP4</Note>
		<Note Title="Description" Type="General" Ordinal="3" xml:lang="en">The Linux Kernel, the operating system core itself.

Security Fix(es):

In the Linux kernel, the following vulnerability has been resolved:

ibmvnic: don&apos;t release napi in __ibmvnic_open()

If __ibmvnic_open() encounters an error such as when setting link state,
it calls release_resources() which frees the napi structures needlessly.
Instead, have __ibmvnic_open() only clean up the work it did so far (i.e.
disable napi and irqs) and leave the rest to the callers.

If caller of __ibmvnic_open() is ibmvnic_open(), it should release the
resources immediately. If the caller is do_reset() or do_hard_reset(),
they will release the resources on the next reset.

This fixes following crash that occurred when running the drmgr command
several times to add/remove a vnic interface:

	[102056] ibmvnic 30000003 env3: Disabling rx_scrq[6] irq
	[102056] ibmvnic 30000003 env3: Disabling rx_scrq[7] irq
	[102056] ibmvnic 30000003 env3: Replenished 8 pools
	Kernel attempted to read user page (10) - exploit attempt? (uid: 0)
	BUG: Kernel NULL pointer dereference on read at 0x00000010
	Faulting instruction address: 0xc000000000a3c840
	Oops: Kernel access of bad area, sig: 11 [#1]
	LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
	...
	CPU: 9 PID: 102056 Comm: kworker/9:2 Kdump: loaded Not tainted 5.16.0-rc5-autotest-g6441998e2e37 #1
	Workqueue: events_long __ibmvnic_reset [ibmvnic]
	NIP:  c000000000a3c840 LR: c0080000029b5378 CTR: c000000000a3c820
	REGS: c0000000548e37e0 TRAP: 0300   Not tainted  (5.16.0-rc5-autotest-g6441998e2e37)
	MSR:  8000000000009033 &lt;SF,EE,ME,IR,DR,RI,LE&gt;  CR: 28248484  XER: 00000004
	CFAR: c0080000029bdd24 DAR: 0000000000000010 DSISR: 40000000 IRQMASK: 0
	GPR00: c0080000029b55d0 c0000000548e3a80 c0000000028f0200 0000000000000000
	...
	NIP [c000000000a3c840] napi_enable+0x20/0xc0
	LR [c0080000029b5378] __ibmvnic_open+0xf0/0x430 [ibmvnic]
	Call Trace:
	[c0000000548e3a80] [0000000000000006] 0x6 (unreliable)
	[c0000000548e3ab0] [c0080000029b55d0] __ibmvnic_open+0x348/0x430 [ibmvnic]
	[c0000000548e3b40] [c0080000029bcc28] __ibmvnic_reset+0x500/0xdf0 [ibmvnic]
	[c0000000548e3c60] [c000000000176228] process_one_work+0x288/0x570
	[c0000000548e3d00] [c000000000176588] worker_thread+0x78/0x660
	[c0000000548e3da0] [c0000000001822f0] kthread+0x1c0/0x1d0
	[c0000000548e3e10] [c00000000000cf64] ret_from_kernel_thread+0x5c/0x64
	Instruction dump:
	7d2948f8 792307e0 4e800020 60000000 3c4c01eb 384239e0 f821ffd1 39430010
	38a0fff6 e92d1100 f9210028 39200000 &lt;e9030010&gt; f9010020 60420000 e9210020
	---[ end trace 5f8033b08fd27706 ]---(CVE-2022-48811)

In the Linux kernel, the following vulnerability has been resolved:

apparmor: Fix null pointer deref when receiving skb during sock creation

The panic below is observed when receiving ICMP packets with secmark set
while an ICMP raw socket is being created. SK_CTX(sk)-&gt;label is updated
in apparmor_socket_post_create(), but the packet is delivered to the
socket before that, causing the null pointer dereference.
Drop the packet if label context is not set.

    BUG: kernel NULL pointer dereference, address: 000000000000004c
    #PF: supervisor read access in kernel mode
    #PF: error_code(0x0000) - not-present page
    PGD 0 P4D 0
    Oops: 0000 [#1] PREEMPT SMP NOPTI
    CPU: 0 PID: 407 Comm: a.out Not tainted 6.4.12-arch1-1 #1 3e6fa2753a2d75925c34ecb78e22e85a65d083df
    Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/28/2020
    RIP: 0010:aa_label_next_confined+0xb/0x40
    Code: 00 00 48 89 ef e8 d5 25 0c 00 e9 66 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 89 f0 &lt;8b&gt; 77 4c 39 c6 7e 1f 48 63 d0 48 8d 14 d7 eb 0b 83 c0 01 48 83 c2
    RSP: 0018:ffffa92940003b08 EFLAGS: 00010246
    RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000e
    RDX: ffffa92940003be8 RSI: 0000000000000000 RDI: 0000000000000000
    RBP: ffff8b57471e7800 R08: ffff8b574c642400 R09: 0000000000000002
    R10: ffffffffbd820eeb R11: ffffffffbeb7ff00 R12: ffff8b574c642400
    R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000000
    FS:  00007fb092ea7640(0000) GS:ffff8b577bc00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 000000000000004c CR3: 00000001020f2005 CR4: 00000000007706f0
    PKRU: 55555554
    Call Trace:
     &lt;IRQ&gt;
     ? __die+0x23/0x70
     ? page_fault_oops+0x171/0x4e0
     ? exc_page_fault+0x7f/0x180
     ? asm_exc_page_fault+0x26/0x30
     ? aa_label_next_confined+0xb/0x40
     apparmor_secmark_check+0xec/0x330
     security_sock_rcv_skb+0x35/0x50
     sk_filter_trim_cap+0x47/0x250
     sock_queue_rcv_skb_reason+0x20/0x60
     raw_rcv+0x13c/0x210
     raw_local_deliver+0x1f3/0x250
     ip_protocol_deliver_rcu+0x4f/0x2f0
     ip_local_deliver_finish+0x76/0xa0
     __netif_receive_skb_one_core+0x89/0xa0
     netif_receive_skb+0x119/0x170
     ? __netdev_alloc_skb+0x3d/0x140
     vmxnet3_rq_rx_complete+0xb23/0x1010 [vmxnet3 56a84f9c97178c57a43a24ec073b45a9d6f01f3a]
     vmxnet3_poll_rx_only+0x36/0xb0 [vmxnet3 56a84f9c97178c57a43a24ec073b45a9d6f01f3a]
     __napi_poll+0x28/0x1b0
     net_rx_action+0x2a4/0x380
     __do_softirq+0xd1/0x2c8
     __irq_exit_rcu+0xbb/0xf0
     common_interrupt+0x86/0xa0
     &lt;/IRQ&gt;
     &lt;TASK&gt;
     asm_common_interrupt+0x26/0x40
    RIP: 0010:apparmor_socket_post_create+0xb/0x200
    Code: 08 48 85 ff 75 a1 eb b1 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 &lt;55&gt; 48 89 fd 53 45 85 c0 0f 84 b2 00 00 00 48 8b 1d 80 56 3f 02 48
    RSP: 0018:ffffa92940ce7e50 EFLAGS: 00000286
    RAX: ffffffffbc756440 RBX: 0000000000000000 RCX: 0000000000000001
    RDX: 0000000000000003 RSI: 0000000000000002 RDI: ffff8b574eaab740
    RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
    R10: ffff8b57444cec70 R11: 0000000000000000 R12: 0000000000000003
    R13: 0000000000000002 R14: ffff8b574eaab740 R15: ffffffffbd8e4748
     ? __pfx_apparmor_socket_post_create+0x10/0x10
     security_socket_post_create+0x4b/0x80
     __sock_create+0x176/0x1f0
     __sys_socket+0x89/0x100
     __x64_sys_socket+0x17/0x20
     do_syscall_64+0x5d/0x90
     ? do_syscall_64+0x6c/0x90
     ? do_syscall_64+0x6c/0x90
     ? do_syscall_64+0x6c/0x90
     entry_SYSCALL_64_after_hwframe+0x72/0xdc(CVE-2023-52889)

In the Linux kernel, the following vulnerability has been resolved:

netfilter: nf_tables: restore set elements when delete set fails

From abort path, nft_mapelem_activate() needs to restore refcounters to
the original state. Currently, it uses the set-&gt;ops-&gt;walk() to iterate
over these set elements. The existing set iterator skips inactive
elements in the next generation, this does not work from the abort path
to restore the original state since it has to skip active elements
instead (not inactive ones).

This patch moves the check for inactive elements to the set iterator
callback, then it reverses the logic for the .activate case which
needs to skip active elements.

Toggle next generation bit for elements when delete set command is
invoked and call nft_clear() from .activate (abort) path to restore the
next generation bit.

The splat below shows an object in mappings memleak:

[43929.457523] ------------[ cut here ]------------
[43929.457532] WARNING: CPU: 0 PID: 1139 at include/net/netfilter/nf_tables.h:1237 nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[...]
[43929.458014] RIP: 0010:nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458076] Code: 83 f8 01 77 ab 49 8d 7c 24 08 e8 37 5e d0 de 49 8b 6c 24 08 48 8d 7d 50 e8 e9 5c d0 de 8b 45 50 8d 50 ff 89 55 50 85 c0 75 86 &lt;0f&gt; 0b eb 82 0f 0b eb b3 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90
[43929.458081] RSP: 0018:ffff888140f9f4b0 EFLAGS: 00010246
[43929.458086] RAX: 0000000000000000 RBX: ffff8881434f5288 RCX: dffffc0000000000
[43929.458090] RDX: 00000000ffffffff RSI: ffffffffa26d28a7 RDI: ffff88810ecc9550
[43929.458093] RBP: ffff88810ecc9500 R08: 0000000000000001 R09: ffffed10281f3e8f
[43929.458096] R10: 0000000000000003 R11: ffff0000ffff0000 R12: ffff8881434f52a0
[43929.458100] R13: ffff888140f9f5f4 R14: ffff888151c7a800 R15: 0000000000000002
[43929.458103] FS:  00007f0c687c4740(0000) GS:ffff888390800000(0000) knlGS:0000000000000000
[43929.458107] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[43929.458111] CR2: 00007f58dbe5b008 CR3: 0000000123602005 CR4: 00000000001706f0
[43929.458114] Call Trace:
[43929.458118]  &lt;TASK&gt;
[43929.458121]  ? __warn+0x9f/0x1a0
[43929.458127]  ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458188]  ? report_bug+0x1b1/0x1e0
[43929.458196]  ? handle_bug+0x3c/0x70
[43929.458200]  ? exc_invalid_op+0x17/0x40
[43929.458211]  ? nft_setelem_data_deactivate+0xd7/0xf0 [nf_tables]
[43929.458271]  ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458332]  nft_mapelem_deactivate+0x24/0x30 [nf_tables]
[43929.458392]  nft_rhash_walk+0xdd/0x180 [nf_tables]
[43929.458453]  ? __pfx_nft_rhash_walk+0x10/0x10 [nf_tables]
[43929.458512]  ? rb_insert_color+0x2e/0x280
[43929.458520]  nft_map_deactivate+0xdc/0x1e0 [nf_tables]
[43929.458582]  ? __pfx_nft_map_deactivate+0x10/0x10 [nf_tables]
[43929.458642]  ? __pfx_nft_mapelem_deactivate+0x10/0x10 [nf_tables]
[43929.458701]  ? __rcu_read_unlock+0x46/0x70
[43929.458709]  nft_delset+0xff/0x110 [nf_tables]
[43929.458769]  nft_flush_table+0x16f/0x460 [nf_tables]
[43929.458830]  nf_tables_deltable+0x501/0x580 [nf_tables](CVE-2024-27012)

In the Linux kernel, the following vulnerability has been resolved:

netfilter: nf_tables: do not compare internal table flags on updates

Restore skipping transaction if table update does not modify flags.(CVE-2024-27065)

In the Linux kernel, the following vulnerability has been resolved:

nilfs2: fix potential kernel bug due to lack of writeback flag waiting

Destructive writes to a block device on which nilfs2 is mounted can cause
a kernel bug in the folio/page writeback start routine or writeback end
routine (__folio_start_writeback in the log below):

 kernel BUG at mm/page-writeback.c:3070!
 Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
 ...
 RIP: 0010:__folio_start_writeback+0xbaa/0x10e0
 Code: 25 ff 0f 00 00 0f 84 18 01 00 00 e8 40 ca c6 ff e9 17 f6 ff ff
  e8 36 ca c6 ff 4c 89 f7 48 c7 c6 80 c0 12 84 e8 e7 b3 0f 00 90 &lt;0f&gt;
  0b e8 1f ca c6 ff 4c 89 f7 48 c7 c6 a0 c6 12 84 e8 d0 b3 0f 00
 ...
 Call Trace:
  &lt;TASK&gt;
  nilfs_segctor_do_construct+0x4654/0x69d0 [nilfs2]
  nilfs_segctor_construct+0x181/0x6b0 [nilfs2]
  nilfs_segctor_thread+0x548/0x11c0 [nilfs2]
  kthread+0x2f0/0x390
  ret_from_fork+0x4b/0x80
  ret_from_fork_asm+0x1a/0x30
  &lt;/TASK&gt;

This is because when the log writer starts a writeback for segment summary
blocks or a super root block that use the backing device&apos;s page cache, it
does not wait for the ongoing folio/page writeback, resulting in an
inconsistent writeback state.

Fix this issue by waiting for ongoing writebacks when putting
folios/pages on the backing device into writeback state.(CVE-2024-37078)

In the Linux kernel, the following vulnerability has been resolved:

scsi: mpt3sas: Avoid test/set_bit() operating in non-allocated memory

There is a potential out-of-bounds access when using test_bit() on a single
word. The test_bit() and set_bit() functions operate on long values, and
when testing or setting a single word, they can exceed the word
boundary. KASAN detects this issue and produces a dump:

	 BUG: KASAN: slab-out-of-bounds in _scsih_add_device.constprop.0 (./arch/x86/include/asm/bitops.h:60 ./include/asm-generic/bitops/instrumented-atomic.h:29 drivers/scsi/mpt3sas/mpt3sas_scsih.c:7331) mpt3sas

	 Write of size 8 at addr ffff8881d26e3c60 by task kworker/u1536:2/2965

For full log, please look at [1].

Make the allocation at least the size of sizeof(unsigned long) so that
set_bit() and test_bit() have sufficient room for read/write operations
without overwriting unallocated memory.

[1] Link: https://lore.kernel.org/all/ZkNcALr3W3KGYYJG@gmail.com/(CVE-2024-40901)

In the Linux kernel, the following vulnerability has been resolved:

drm/amdgpu: change vm-&gt;task_info handling

This patch changes the handling and lifecycle of vm-&gt;task_info object.
The major changes are:
- vm-&gt;task_info is a dynamically allocated ptr now, and its uasge is
  reference counted.
- introducing two new helper funcs for task_info lifecycle management
    - amdgpu_vm_get_task_info: reference counts up task_info before
      returning this info
    - amdgpu_vm_put_task_info: reference counts down task_info
- last put to task_info() frees task_info from the vm.

This patch also does logistical changes required for existing usage
of vm-&gt;task_info.

V2: Do not block all the prints when task_info not found (Felix)

V3: Fixed review comments from Felix
   - Fix wrong indentation
   - No debug message for -ENOMEM
   - Add NULL check for task_info
   - Do not duplicate the debug messages (ti vs no ti)
   - Get first reference of task_info in vm_init(), put last
     in vm_fini()

V4: Fixed review comments from Felix
   - fix double reference increment in create_task_info
   - change amdgpu_vm_get_task_info_pasid
   - additional changes in amdgpu_gem.c while porting(CVE-2024-41008)

In the Linux kernel, the following vulnerability has been resolved:

ocfs2: strict bound check before memcmp in ocfs2_xattr_find_entry()

xattr in ocfs2 maybe &apos;non-indexed&apos;, which saved with additional space
requested.  It&apos;s better to check if the memory is out of bound before
memcmp, although this possibility mainly comes from crafted poisonous
images.(CVE-2024-41016)

In the Linux kernel, the following vulnerability has been resolved:

drm/radeon: check bo_va-&gt;bo is non-NULL before using it

The call to radeon_vm_clear_freed might clear bo_va-&gt;bo, so
we have to check it before dereferencing it.(CVE-2024-41060)

In the Linux kernel, the following vulnerability has been resolved:

nvme-fabrics: use reserved tag for reg read/write command

In some scenarios, if too many commands are issued by nvme command in
the same time by user tasks, this may exhaust all tags of admin_q. If
a reset (nvme reset or IO timeout) occurs before these commands finish,
reconnect routine may fail to update nvme regs due to insufficient tags,
which will cause kernel hang forever. In order to workaround this issue,
maybe we can let reg_read32()/reg_read64()/reg_write32() use reserved
tags. This maybe safe for nvmf:

1. For the disable ctrl path,  we will not issue connect command
2. For the enable ctrl / fw activate path, since connect and reg_xx()
   are called serially.

So the reserved tags may still be enough while reg_xx() use reserved tags.(CVE-2024-41082)

In the Linux kernel, the following vulnerability has been resolved:

i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr

When del_timer_sync() is called in an interrupt context it throws a warning
because of potential deadlock. The timer is used only to exit from
wait_for_completion() after a timeout so replacing the call with
wait_for_completion_timeout() allows to remove the problematic timer and
its related functions altogether.(CVE-2024-42153)

In the Linux kernel, the following vulnerability has been resolved:

powerpc/pseries: Fix scv instruction crash with kexec

kexec on pseries disables AIL (reloc_on_exc), required for scv
instruction support, before other CPUs have been shut down. This means
they can execute scv instructions after AIL is disabled, which causes an
interrupt at an unexpected entry location that crashes the kernel.

Change the kexec sequence to disable AIL after other CPUs have been
brought down.

As a refresher, the real-mode scv interrupt vector is 0x17000, and the
fixed-location head code probably couldn&apos;t easily deal with implementing
such high addresses so it was just decided not to support that interrupt
at all.(CVE-2024-42230)

In the Linux kernel, the following vulnerability has been resolved:

drm/i915/gem: Fix Virtual Memory mapping boundaries calculation

Calculating the size of the mapped area as the lesser value
between the requested size and the actual size does not consider
the partial mapping offset. This can cause page fault access.

Fix the calculation of the starting and ending addresses, the
total size is now deduced from the difference between the end and
start addresses.

Additionally, the calculations have been rewritten in a clearer
and more understandable form.

[Joonas: Add Requires: tag]
Requires: 60a2066c5005 (&quot;drm/i915/gem: Adjust vma offset for framebuffer mmap offset&quot;)
(cherry picked from commit 97b6784753da06d9d40232328efc5c5367e53417)(CVE-2024-42259)

In the Linux kernel, the following vulnerability has been resolved:

riscv/mm: Add handling for VM_FAULT_SIGSEGV in mm_fault_error()

Handle VM_FAULT_SIGSEGV in the page fault path so that we correctly
kill the process and we don&apos;t BUG() the kernel.(CVE-2024-42267)

In the Linux kernel, the following vulnerability has been resolved:

scsi: qla2xxx: validate nvme_local_port correctly

The driver load failed with error message,

qla2xxx [0000:04:00.0]-ffff:0: register_localport failed: ret=ffffffef

and with a kernel crash,

	BUG: unable to handle kernel NULL pointer dereference at 0000000000000070
	Workqueue: events_unbound qla_register_fcport_fn [qla2xxx]
	RIP: 0010:nvme_fc_register_remoteport+0x16/0x430 [nvme_fc]
	RSP: 0018:ffffaaa040eb3d98 EFLAGS: 00010282
	RAX: 0000000000000000 RBX: ffff9dfb46b78c00 RCX: 0000000000000000
	RDX: ffff9dfb46b78da8 RSI: ffffaaa040eb3e08 RDI: 0000000000000000
	RBP: ffff9dfb612a0a58 R08: ffffffffaf1d6270 R09: 3a34303a30303030
	R10: 34303a303030305b R11: 2078787832616c71 R12: ffff9dfb46b78dd4
	R13: ffff9dfb46b78c24 R14: ffff9dfb41525300 R15: ffff9dfb46b78da8
	FS:  0000000000000000(0000) GS:ffff9dfc67c00000(0000) knlGS:0000000000000000
	CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
	CR2: 0000000000000070 CR3: 000000018da10004 CR4: 00000000000206f0
	Call Trace:
	qla_nvme_register_remote+0xeb/0x1f0 [qla2xxx]
	? qla2x00_dfs_create_rport+0x231/0x270 [qla2xxx]
	qla2x00_update_fcport+0x2a1/0x3c0 [qla2xxx]
	qla_register_fcport_fn+0x54/0xc0 [qla2xxx]

Exit the qla_nvme_register_remote() function when qla_nvme_register_hba()
fails and correctly validate nvme_local_port.(CVE-2024-42286)

In the Linux kernel, the following vulnerability has been resolved:

scsi: qla2xxx: Complete command early within lock

A crash was observed while performing NPIV and FW reset,

 BUG: kernel NULL pointer dereference, address: 000000000000001c
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 1 PREEMPT_RT SMP NOPTI
 RIP: 0010:dma_direct_unmap_sg+0x51/0x1e0
 RSP: 0018:ffffc90026f47b88 EFLAGS: 00010246
 RAX: 0000000000000000 RBX: 0000000000000021 RCX: 0000000000000002
 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff8881041130d0
 RBP: ffff8881041130d0 R08: 0000000000000000 R09: 0000000000000034
 R10: ffffc90026f47c48 R11: 0000000000000031 R12: 0000000000000000
 R13: 0000000000000000 R14: ffff8881565e4a20 R15: 0000000000000000
 FS: 00007f4c69ed3d00(0000) GS:ffff889faac80000(0000) knlGS:0000000000000000
 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000000000000001c CR3: 0000000288a50002 CR4: 00000000007706e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 PKRU: 55555554
 Call Trace:
 &lt;TASK&gt;
 ? __die_body+0x1a/0x60
 ? page_fault_oops+0x16f/0x4a0
 ? do_user_addr_fault+0x174/0x7f0
 ? exc_page_fault+0x69/0x1a0
 ? asm_exc_page_fault+0x22/0x30
 ? dma_direct_unmap_sg+0x51/0x1e0
 ? preempt_count_sub+0x96/0xe0
 qla2xxx_qpair_sp_free_dma+0x29f/0x3b0 [qla2xxx]
 qla2xxx_qpair_sp_compl+0x60/0x80 [qla2xxx]
 __qla2x00_abort_all_cmds+0xa2/0x450 [qla2xxx]

The command completion was done early while aborting the commands in driver
unload path but outside lock to avoid the WARN_ON condition of performing
dma_free_attr within the lock. However this caused race condition while
command completion via multiple paths causing system crash.

Hence complete the command early in unload path but within the lock to
avoid race condition.(CVE-2024-42287)

In the Linux kernel, the following vulnerability has been resolved:

nilfs2: handle inconsistent state in nilfs_btnode_create_block()

Syzbot reported that a buffer state inconsistency was detected in
nilfs_btnode_create_block(), triggering a kernel bug.

It is not appropriate to treat this inconsistency as a bug; it can occur
if the argument block address (the buffer index of the newly created
block) is a virtual block number and has been reallocated due to
corruption of the bitmap used to manage its allocation state.

So, modify nilfs_btnode_create_block() and its callers to treat it as a
possible filesystem error, rather than triggering a kernel bug.(CVE-2024-42295)

In the Linux kernel, the following vulnerability has been resolved:

fs/ntfs3: Update log-&gt;page_{mask,bits} if log-&gt;page_size changed

If an NTFS file system is mounted to another system with different
PAGE_SIZE from the original system, log-&gt;page_size will change in
log_replay(), but log-&gt;page_{mask,bits} don&apos;t change correspondingly.
This will cause a panic because &quot;u32 bytes = log-&gt;page_size - page_off&quot;
will get a negative value in the later read_log_page().(CVE-2024-42299)

In the Linux kernel, the following vulnerability has been resolved:

sysctl: always initialize i_uid/i_gid

Always initialize i_uid/i_gid inside the sysfs core so set_ownership()
can safely skip setting them.

Commit 5ec27ec735ba (&quot;fs/proc/proc_sysctl.c: fix the default values of
i_uid/i_gid on /proc/sys inodes.&quot;) added defaults for i_uid/i_gid when
set_ownership() was not implemented. It also missed adjusting
net_ctl_set_ownership() to use the same default values in case the
computation of a better value failed.(CVE-2024-42312)

In the Linux kernel, the following vulnerability has been resolved:

PCI: endpoint: pci-epf-test: Make use of cached &apos;epc_features&apos; in pci_epf_test_core_init()

Instead of getting the epc_features from pci_epc_get_features() API, use
the cached pci_epf_test::epc_features value to avoid the NULL check. Since
the NULL check is already performed in pci_epf_test_bind(), having one more
check in pci_epf_test_core_init() is redundant and it is not possible to
hit the NULL pointer dereference.

Also with commit a01e7214bef9 (&quot;PCI: endpoint: Remove &quot;core_init_notifier&quot;
flag&quot;), &apos;epc_features&apos; got dereferenced without the NULL check, leading to
the following false positive Smatch warning:

  drivers/pci/endpoint/functions/pci-epf-test.c:784 pci_epf_test_core_init() error: we previously assumed &apos;epc_features&apos; could be null (see line 747)

Thus, remove the redundant NULL check and also use the epc_features::
{msix_capable/msi_capable} flags directly to avoid local variables.

[kwilczynski: commit log](CVE-2024-43824)

In the Linux kernel, the following vulnerability has been resolved:

xdp: fix invalid wait context of page_pool_destroy()

If the driver uses a page pool, it creates a page pool with
page_pool_create().
The reference count of page pool is 1 as default.
A page pool will be destroyed only when a reference count reaches 0.
page_pool_destroy() is used to destroy page pool, it decreases a
reference count.
When a page pool is destroyed, -&gt;disconnect() is called, which is
mem_allocator_disconnect().
This function internally acquires mutex_lock().

If the driver uses XDP, it registers a memory model with
xdp_rxq_info_reg_mem_model().
The xdp_rxq_info_reg_mem_model() internally increases a page pool
reference count if a memory model is a page pool.
Now the reference count is 2.

To destroy a page pool, the driver should call both page_pool_destroy()
and xdp_unreg_mem_model().
The xdp_unreg_mem_model() internally calls page_pool_destroy().
Only page_pool_destroy() decreases a reference count.

If a driver calls page_pool_destroy() then xdp_unreg_mem_model(), we
will face an invalid wait context warning.
Because xdp_unreg_mem_model() calls page_pool_destroy() with
rcu_read_lock().
The page_pool_destroy() internally acquires mutex_lock().

Splat looks like:
=============================
[ BUG: Invalid wait context ]
6.10.0-rc6+ #4 Tainted: G W
-----------------------------
ethtool/1806 is trying to lock:
ffffffff90387b90 (mem_id_lock){+.+.}-{4:4}, at: mem_allocator_disconnect+0x73/0x150
other info that might help us debug this:
context-{5:5}
3 locks held by ethtool/1806:
stack backtrace:
CPU: 0 PID: 1806 Comm: ethtool Tainted: G W 6.10.0-rc6+ #4 f916f41f172891c800f2fed
Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
Call Trace:
&lt;TASK&gt;
dump_stack_lvl+0x7e/0xc0
__lock_acquire+0x1681/0x4de0
? _printk+0x64/0xe0
? __pfx_mark_lock.part.0+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
lock_acquire+0x1b3/0x580
? mem_allocator_disconnect+0x73/0x150
? __wake_up_klogd.part.0+0x16/0xc0
? __pfx_lock_acquire+0x10/0x10
? dump_stack_lvl+0x91/0xc0
__mutex_lock+0x15c/0x1690
? mem_allocator_disconnect+0x73/0x150
? __pfx_prb_read_valid+0x10/0x10
? mem_allocator_disconnect+0x73/0x150
? __pfx_llist_add_batch+0x10/0x10
? console_unlock+0x193/0x1b0
? lockdep_hardirqs_on+0xbe/0x140
? __pfx___mutex_lock+0x10/0x10
? tick_nohz_tick_stopped+0x16/0x90
? __irq_work_queue_local+0x1e5/0x330
? irq_work_queue+0x39/0x50
? __wake_up_klogd.part.0+0x79/0xc0
? mem_allocator_disconnect+0x73/0x150
mem_allocator_disconnect+0x73/0x150
? __pfx_mem_allocator_disconnect+0x10/0x10
? mark_held_locks+0xa5/0xf0
? rcu_is_watching+0x11/0xb0
page_pool_release+0x36e/0x6d0
page_pool_destroy+0xd7/0x440
xdp_unreg_mem_model+0x1a7/0x2a0
? __pfx_xdp_unreg_mem_model+0x10/0x10
? kfree+0x125/0x370
? bnxt_free_ring.isra.0+0x2eb/0x500
? bnxt_free_mem+0x5ac/0x2500
xdp_rxq_info_unreg+0x4a/0xd0
bnxt_free_mem+0x1356/0x2500
bnxt_close_nic+0xf0/0x3b0
? __pfx_bnxt_close_nic+0x10/0x10
? ethnl_parse_bit+0x2c6/0x6d0
? __pfx___nla_validate_parse+0x10/0x10
? __pfx_ethnl_parse_bit+0x10/0x10
bnxt_set_features+0x2a8/0x3e0
__netdev_update_features+0x4dc/0x1370
? ethnl_parse_bitset+0x4ff/0x750
? __pfx_ethnl_parse_bitset+0x10/0x10
? __pfx___netdev_update_features+0x10/0x10
? mark_held_locks+0xa5/0xf0
? _raw_spin_unlock_irqrestore+0x42/0x70
? __pm_runtime_resume+0x7d/0x110
ethnl_set_features+0x32d/0xa20

To fix this problem, it uses rhashtable_lookup_fast() instead of
rhashtable_lookup() with rcu_read_lock().
Using xa without rcu_read_lock() here is safe.
xa is freed by __xdp_mem_allocator_rcu_free() and this is called by
call_rcu() of mem_xa_remove().
The mem_xa_remove() is called by page_pool_destroy() if a reference
count reaches 0.
The xa is already protected by the reference count mechanism well in the
control plane.
So removing rcu_read_lock() for page_pool_destroy() is safe.(CVE-2024-43834)

In the Linux kernel, the following vulnerability has been resolved:

block: initialize integrity buffer to zero before writing it to media

Metadata added by bio_integrity_prep is using plain kmalloc, which leads
to random kernel memory being written media.  For PI metadata this is
limited to the app tag that isn&apos;t used by kernel generated metadata,
but for non-PI metadata the entire buffer leaks kernel memory.

Fix this by adding the __GFP_ZERO flag to allocations for writes.(CVE-2024-43854)

In the Linux kernel, the following vulnerability has been resolved:

usb: vhci-hcd: Do not drop references before new references are gained

At a few places the driver carries stale pointers
to references that can still be used. Make sure that does not happen.
This strictly speaking closes ZDI-CAN-22273, though there may be
similar races in the driver.(CVE-2024-43883)

In the Linux kernel, the following vulnerability has been resolved:

Bluetooth: MGMT: Add error handling to pair_device()

hci_conn_params_add() never checks for a NULL value and could lead to a NULL
pointer dereference causing a crash.

Fixed by adding error handling in the function.(CVE-2024-43884)

In the Linux kernel, the following vulnerability has been resolved:

padata: Fix possible divide-by-0 panic in padata_mt_helper()

We are hit with a not easily reproducible divide-by-0 panic in padata.c at
bootup time.

  [   10.017908] Oops: divide error: 0000 1 PREEMPT SMP NOPTI
  [   10.017908] CPU: 26 PID: 2627 Comm: kworker/u1666:1 Not tainted 6.10.0-15.el10.x86_64 #1
  [   10.017908] Hardware name: Lenovo ThinkSystem SR950 [7X12CTO1WW]/[7X12CTO1WW], BIOS [PSE140J-2.30] 07/20/2021
  [   10.017908] Workqueue: events_unbound padata_mt_helper
  [   10.017908] RIP: 0010:padata_mt_helper+0x39/0xb0
    :
  [   10.017963] Call Trace:
  [   10.017968]  &lt;TASK&gt;
  [   10.018004]  ? padata_mt_helper+0x39/0xb0
  [   10.018084]  process_one_work+0x174/0x330
  [   10.018093]  worker_thread+0x266/0x3a0
  [   10.018111]  kthread+0xcf/0x100
  [   10.018124]  ret_from_fork+0x31/0x50
  [   10.018138]  ret_from_fork_asm+0x1a/0x30
  [   10.018147]  &lt;/TASK&gt;

Looking at the padata_mt_helper() function, the only way a divide-by-0
panic can happen is when ps-&gt;chunk_size is 0.  The way that chunk_size is
initialized in padata_do_multithreaded(), chunk_size can be 0 when the
min_chunk in the passed-in padata_mt_job structure is 0.

Fix this divide-by-0 panic by making sure that chunk_size will be at least
1 no matter what the input parameters are.(CVE-2024-43889)

In the Linux kernel, the following vulnerability has been resolved:

tracing: Fix overflow in get_free_elt()

&quot;tracing_map-&gt;next_elt&quot; in get_free_elt() is at risk of overflowing.

Once it overflows, new elements can still be inserted into the tracing_map
even though the maximum number of elements (`max_elts`) has been reached.
Continuing to insert elements after the overflow could result in the
tracing_map containing &quot;tracing_map-&gt;max_size&quot; elements, leaving no empty
entries.
If any attempt is made to insert an element into a full tracing_map using
`__tracing_map_insert()`, it will cause an infinite loop with preemption
disabled, leading to a CPU hang problem.

Fix this by preventing any further increments to &quot;tracing_map-&gt;next_elt&quot;
once it reaches &quot;tracing_map-&gt;max_elt&quot;.(CVE-2024-43890)

In the Linux kernel, the following vulnerability has been resolved:

ext4: sanity check for NULL pointer after ext4_force_shutdown

Test case: 2 threads write short inline data to a file.
In ext4_page_mkwrite the resulting inline data is converted.
Handling ext4_grp_locked_error with description &quot;block bitmap
and bg descriptor inconsistent: X vs Y free clusters&quot; calls
ext4_force_shutdown. The conversion clears
EXT4_STATE_MAY_INLINE_DATA but fails for
ext4_destroy_inline_data_nolock and ext4_mark_iloc_dirty due
to ext4_forced_shutdown. The restoration of inline data fails
for the same reason not setting EXT4_STATE_MAY_INLINE_DATA.
Without the flag set a regular process path in ext4_da_write_end
follows trying to dereference page folio private pointer that has
not been set. The fix calls early return with -EIO error shall the
pointer to private be NULL.

Sample crash report:

Unable to handle kernel paging request at virtual address dfff800000000004
KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]
Mem abort info:
  ESR = 0x0000000096000005
  EC = 0x25: DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
  FSC = 0x05: level 1 translation fault
Data abort info:
  ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
  CM = 0, WnR = 0, TnD = 0, TagAccess = 0
  GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[dfff800000000004] address between user and kernel address ranges
Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 20274 Comm: syz-executor185 Not tainted 6.9.0-rc7-syzkaller-gfda5695d692c #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __block_commit_write+0x64/0x2b0 fs/buffer.c:2167
lr : __block_commit_write+0x3c/0x2b0 fs/buffer.c:2160
sp : ffff8000a1957600
x29: ffff8000a1957610 x28: dfff800000000000 x27: ffff0000e30e34b0
x26: 0000000000000000 x25: dfff800000000000 x24: dfff800000000000
x23: fffffdffc397c9e0 x22: 0000000000000020 x21: 0000000000000020
x20: 0000000000000040 x19: fffffdffc397c9c0 x18: 1fffe000367bd196
x17: ffff80008eead000 x16: ffff80008ae89e3c x15: 00000000200000c0
x14: 1fffe0001cbe4e04 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000001 x10: 0000000000ff0100 x9 : 0000000000000000
x8 : 0000000000000004 x7 : 0000000000000000 x6 : 0000000000000000
x5 : fffffdffc397c9c0 x4 : 0000000000000020 x3 : 0000000000000020
x2 : 0000000000000040 x1 : 0000000000000020 x0 : fffffdffc397c9c0
Call trace:
 __block_commit_write+0x64/0x2b0 fs/buffer.c:2167
 block_write_end+0xb4/0x104 fs/buffer.c:2253
 ext4_da_do_write_end fs/ext4/inode.c:2955 [inline]
 ext4_da_write_end+0x2c4/0xa40 fs/ext4/inode.c:3028
 generic_perform_write+0x394/0x588 mm/filemap.c:3985
 ext4_buffered_write_iter+0x2c0/0x4ec fs/ext4/file.c:299
 ext4_file_write_iter+0x188/0x1780
 call_write_iter include/linux/fs.h:2110 [inline]
 new_sync_write fs/read_write.c:497 [inline]
 vfs_write+0x968/0xc3c fs/read_write.c:590
 ksys_write+0x15c/0x26c fs/read_write.c:643
 __do_sys_write fs/read_write.c:655 [inline]
 __se_sys_write fs/read_write.c:652 [inline]
 __arm64_sys_write+0x7c/0x90 fs/read_write.c:652
 __invoke_syscall arch/arm64/kernel/syscall.c:34 [inline]
 invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:48
 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:133
 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:152
 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712
 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730
 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598
Code: 97f85911 f94002da 91008356 d343fec8 (38796908)
---[ end trace 0000000000000000 ]---
----------------
Code disassembly (best guess):
   0:	97f85911 	bl	0xffffffffffe16444
   4:	f94002da 	ldr	x26, [x22]
   8:	91008356 	add	x22, x26, #0x20
   c:	d343fec8 	lsr	x8, x22, #3
* 10:	38796908 	ldrb	w8, [x8, x25] &lt;-- trapping instruction(CVE-2024-43898)

In the Linux kernel, the following vulnerability has been resolved:

drm/amd/display: Add null checker before passing variables

Checks null pointer before passing variables to functions.

This fixes 3 NULL_RETURNS issues reported by Coverity.(CVE-2024-43902)

In the Linux kernel, the following vulnerability has been resolved:

drm/amd/pm: Fix the null pointer dereference for vega10_hwmgr

Check return value and conduct null pointer handling to avoid null pointer dereference.(CVE-2024-43905)

In the Linux kernel, the following vulnerability has been resolved:

drm/amdgpu: Fix the null pointer dereference to ras_manager

Check ras_manager before using it(CVE-2024-43908)

In the Linux kernel, the following vulnerability has been resolved:

net: bridge: mcast: wait for previous gc cycles when removing port

syzbot hit a use-after-free[1] which is caused because the bridge doesn&apos;t
make sure that all previous garbage has been collected when removing a
port. What happens is:
      CPU 1                   CPU 2
 start gc cycle           remove port
                         acquire gc lock first
 wait for lock
                         call br_multicasg_gc() directly
 acquire lock now but    free port
 the port can be freed
 while grp timers still
 running

Make sure all previous gc cycles have finished by using flush_work before
freeing the port.

[1]
  BUG: KASAN: slab-use-after-free in br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861
  Read of size 8 at addr ffff888071d6d000 by task syz.5.1232/9699

  CPU: 1 PID: 9699 Comm: syz.5.1232 Not tainted 6.10.0-rc5-syzkaller-00021-g24ca36a562d6 #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024
  Call Trace:
   &lt;IRQ&gt;
   __dump_stack lib/dump_stack.c:88 [inline]
   dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114
   print_address_description mm/kasan/report.c:377 [inline]
   print_report+0xc3/0x620 mm/kasan/report.c:488
   kasan_report+0xd9/0x110 mm/kasan/report.c:601
   br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861
   call_timer_fn+0x1a3/0x610 kernel/time/timer.c:1792
   expire_timers kernel/time/timer.c:1843 [inline]
   __run_timers+0x74b/0xaf0 kernel/time/timer.c:2417
   __run_timer_base kernel/time/timer.c:2428 [inline]
   __run_timer_base kernel/time/timer.c:2421 [inline]
   run_timer_base+0x111/0x190 kernel/time/timer.c:2437(CVE-2024-44934)

In the Linux kernel, the following vulnerability has been resolved:

jfs: Fix shift-out-of-bounds in dbDiscardAG

When searching for the next smaller log2 block, BLKSTOL2() returned 0,
causing shift exponent -1 to be negative.

This patch fixes the issue by exiting the loop directly when negative
shift is found.(CVE-2024-44938)

In the Linux kernel, the following vulnerability has been resolved:

f2fs: fix to do sanity check on F2FS_INLINE_DATA flag in inode during GC

syzbot reports a f2fs bug as below:

------------[ cut here ]------------
kernel BUG at fs/f2fs/inline.c:258!
CPU: 1 PID: 34 Comm: kworker/u8:2 Not tainted 6.9.0-rc6-syzkaller-00012-g9e4bc4bcae01 #0
RIP: 0010:f2fs_write_inline_data+0x781/0x790 fs/f2fs/inline.c:258
Call Trace:
 f2fs_write_single_data_page+0xb65/0x1d60 fs/f2fs/data.c:2834
 f2fs_write_cache_pages fs/f2fs/data.c:3133 [inline]
 __f2fs_write_data_pages fs/f2fs/data.c:3288 [inline]
 f2fs_write_data_pages+0x1efe/0x3a90 fs/f2fs/data.c:3315
 do_writepages+0x35b/0x870 mm/page-writeback.c:2612
 __writeback_single_inode+0x165/0x10b0 fs/fs-writeback.c:1650
 writeback_sb_inodes+0x905/0x1260 fs/fs-writeback.c:1941
 wb_writeback+0x457/0xce0 fs/fs-writeback.c:2117
 wb_do_writeback fs/fs-writeback.c:2264 [inline]
 wb_workfn+0x410/0x1090 fs/fs-writeback.c:2304
 process_one_work kernel/workqueue.c:3254 [inline]
 process_scheduled_works+0xa12/0x17c0 kernel/workqueue.c:3335
 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416
 kthread+0x2f2/0x390 kernel/kthread.c:388
 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

The root cause is: inline_data inode can be fuzzed, so that there may
be valid blkaddr in its direct node, once f2fs triggers background GC
to migrate the block, it will hit f2fs_bug_on() during dirty page
writeback.

Let&apos;s add sanity check on F2FS_INLINE_DATA flag in inode during GC,
so that, it can forbid migrating inline_data inode&apos;s data block for
fixing.(CVE-2024-44942)

In the Linux kernel, the following vulnerability has been resolved:

netfilter: ctnetlink: use helper function to calculate expect ID

Delete expectation path is missing a call to the nf_expect_get_id()
helper function to calculate the expectation ID, otherwise LSB of the
expectation object address is leaked to userspace.(CVE-2024-44944)

In the Linux kernel, the following vulnerability has been resolved:

kcm: Serialise kcm_sendmsg() for the same socket.

syzkaller reported UAF in kcm_release(). [0]

The scenario is

  1. Thread A builds a skb with MSG_MORE and sets kcm-&gt;seq_skb.

  2. Thread A resumes building skb from kcm-&gt;seq_skb but is blocked
     by sk_stream_wait_memory()

  3. Thread B calls sendmsg() concurrently, finishes building kcm-&gt;seq_skb
     and puts the skb to the write queue

  4. Thread A faces an error and finally frees skb that is already in the
     write queue

  5. kcm_release() does double-free the skb in the write queue

When a thread is building a MSG_MORE skb, another thread must not touch it.

Let&apos;s add a per-sk mutex and serialise kcm_sendmsg().

[0]:
BUG: KASAN: slab-use-after-free in __skb_unlink include/linux/skbuff.h:2366 [inline]
BUG: KASAN: slab-use-after-free in __skb_dequeue include/linux/skbuff.h:2385 [inline]
BUG: KASAN: slab-use-after-free in __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline]
BUG: KASAN: slab-use-after-free in __skb_queue_purge include/linux/skbuff.h:3181 [inline]
BUG: KASAN: slab-use-after-free in kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691
Read of size 8 at addr ffff0000ced0fc80 by task syz-executor329/6167

CPU: 1 PID: 6167 Comm: syz-executor329 Tainted: G    B              6.8.0-rc5-syzkaller-g9abbc24128bc #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Call trace:
 dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:291
 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:298
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:377 [inline]
 print_report+0x178/0x518 mm/kasan/report.c:488
 kasan_report+0xd8/0x138 mm/kasan/report.c:601
 __asan_report_load8_noabort+0x20/0x2c mm/kasan/report_generic.c:381
 __skb_unlink include/linux/skbuff.h:2366 [inline]
 __skb_dequeue include/linux/skbuff.h:2385 [inline]
 __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline]
 __skb_queue_purge include/linux/skbuff.h:3181 [inline]
 kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691
 __sock_release net/socket.c:659 [inline]
 sock_close+0xa4/0x1e8 net/socket.c:1421
 __fput+0x30c/0x738 fs/file_table.c:376
 ____fput+0x20/0x30 fs/file_table.c:404
 task_work_run+0x230/0x2e0 kernel/task_work.c:180
 exit_task_work include/linux/task_work.h:38 [inline]
 do_exit+0x618/0x1f64 kernel/exit.c:871
 do_group_exit+0x194/0x22c kernel/exit.c:1020
 get_signal+0x1500/0x15ec kernel/signal.c:2893
 do_signal+0x23c/0x3b44 arch/arm64/kernel/signal.c:1249
 do_notify_resume+0x74/0x1f4 arch/arm64/kernel/entry-common.c:148
 exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline]
 exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline]
 el0_svc+0xac/0x168 arch/arm64/kernel/entry-common.c:713
 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730
 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598

Allocated by task 6166:
 kasan_save_stack mm/kasan/common.c:47 [inline]
 kasan_save_track+0x40/0x78 mm/kasan/common.c:68
 kasan_save_alloc_info+0x70/0x84 mm/kasan/generic.c:626
 unpoison_slab_object mm/kasan/common.c:314 [inline]
 __kasan_slab_alloc+0x74/0x8c mm/kasan/common.c:340
 kasan_slab_alloc include/linux/kasan.h:201 [inline]
 slab_post_alloc_hook mm/slub.c:3813 [inline]
 slab_alloc_node mm/slub.c:3860 [inline]
 kmem_cache_alloc_node+0x204/0x4c0 mm/slub.c:3903
 __alloc_skb+0x19c/0x3d8 net/core/skbuff.c:641
 alloc_skb include/linux/skbuff.h:1296 [inline]
 kcm_sendmsg+0x1d3c/0x2124 net/kcm/kcmsock.c:783
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 sock_sendmsg+0x220/0x2c0 net/socket.c:768
 splice_to_socket+0x7cc/0xd58 fs/splice.c:889
 do_splice_from fs/splice.c:941 [inline]
 direct_splice_actor+0xec/0x1d8 fs/splice.c:1164
 splice_direct_to_actor+0x438/0xa0c fs/splice.c:1108
 do_splice_direct_actor 
---truncated---(CVE-2024-44946)</Note>
		<Note Title="Topic" Type="General" Ordinal="4" xml:lang="en">An update for kernel is now available for openEuler-22.03-LTS-SP4.

openEuler Security has rated this update as having a security impact of high. A Common Vunlnerability Scoring System(CVSS)base score,which gives a detailed severity rating, is available for each vulnerability from the CVElink(s) in the References section.</Note>
		<Note Title="Severity" Type="General" Ordinal="5" xml:lang="en">High</Note>
		<Note Title="Affected Component" Type="General" Ordinal="6" xml:lang="en">kernel</Note>
	</DocumentNotes>
	<DocumentReferences>
		<Reference Type="Self">
			<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
		</Reference>
		<Reference Type="openEuler CVE">
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2022-48811</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2023-52889</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-27012</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-27065</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-37078</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-40901</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-41008</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-41016</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-41060</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-41082</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42153</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42230</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42259</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42267</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42286</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42287</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42295</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42299</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-42312</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43824</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43834</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43854</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43883</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43884</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43889</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43890</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43898</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43902</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43905</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-43908</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-44934</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-44938</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-44942</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-44944</URL>
			<URL>https://www.openeuler.org/en/security/cve/detail/?cveId=CVE-2024-44946</URL>
		</Reference>
		<Reference Type="Other">
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2022-48811</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2023-52889</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-27012</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-27065</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-37078</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-40901</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-41008</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-41016</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-41060</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-41082</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-42153</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-42230</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-42259</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-42267</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-42286</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-42287</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-42295</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-42299</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-42312</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-43824</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-43834</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-43854</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-43883</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-43884</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-43889</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-43890</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-43898</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-43902</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-43905</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-43908</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-44934</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-44938</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-44942</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-44944</URL>
			<URL>https://nvd.nist.gov/vuln/detail/CVE-2024-44946</URL>
		</Reference>
	</DocumentReferences>
	<ProductTree xmlns="http://www.icasi.org/CVRF/schema/prod/1.1">
		<Branch Type="Product Name" Name="openEuler">
			<FullProductName ProductID="openEuler-22.03-LTS-SP4" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">openEuler-22.03-LTS-SP4</FullProductName>
		</Branch>
		<Branch Type="Package Arch" Name="aarch64">
			<FullProductName ProductID="bpftool-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">bpftool-5.10.0-226.0.0.125.oe2203sp4.aarch64.rpm</FullProductName>
			<FullProductName ProductID="bpftool-debuginfo-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">bpftool-debuginfo-5.10.0-226.0.0.125.oe2203sp4.aarch64.rpm</FullProductName>
			<FullProductName ProductID="kernel-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">kernel-5.10.0-226.0.0.125.oe2203sp4.aarch64.rpm</FullProductName>
			<FullProductName ProductID="kernel-debuginfo-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">kernel-debuginfo-5.10.0-226.0.0.125.oe2203sp4.aarch64.rpm</FullProductName>
			<FullProductName ProductID="kernel-debugsource-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">kernel-debugsource-5.10.0-226.0.0.125.oe2203sp4.aarch64.rpm</FullProductName>
			<FullProductName ProductID="kernel-devel-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">kernel-devel-5.10.0-226.0.0.125.oe2203sp4.aarch64.rpm</FullProductName>
			<FullProductName ProductID="kernel-headers-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">kernel-headers-5.10.0-226.0.0.125.oe2203sp4.aarch64.rpm</FullProductName>
			<FullProductName ProductID="kernel-source-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">kernel-source-5.10.0-226.0.0.125.oe2203sp4.aarch64.rpm</FullProductName>
			<FullProductName ProductID="kernel-tools-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">kernel-tools-5.10.0-226.0.0.125.oe2203sp4.aarch64.rpm</FullProductName>
			<FullProductName ProductID="kernel-tools-debuginfo-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">kernel-tools-debuginfo-5.10.0-226.0.0.125.oe2203sp4.aarch64.rpm</FullProductName>
			<FullProductName ProductID="kernel-tools-devel-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">kernel-tools-devel-5.10.0-226.0.0.125.oe2203sp4.aarch64.rpm</FullProductName>
			<FullProductName ProductID="perf-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">perf-5.10.0-226.0.0.125.oe2203sp4.aarch64.rpm</FullProductName>
			<FullProductName ProductID="perf-debuginfo-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">perf-debuginfo-5.10.0-226.0.0.125.oe2203sp4.aarch64.rpm</FullProductName>
			<FullProductName ProductID="python3-perf-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">python3-perf-5.10.0-226.0.0.125.oe2203sp4.aarch64.rpm</FullProductName>
			<FullProductName ProductID="python3-perf-debuginfo-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">python3-perf-debuginfo-5.10.0-226.0.0.125.oe2203sp4.aarch64.rpm</FullProductName>
		</Branch>
		<Branch Type="Package Arch" Name="x86_64">
			<FullProductName ProductID="bpftool-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">bpftool-5.10.0-226.0.0.125.oe2203sp4.x86_64.rpm</FullProductName>
			<FullProductName ProductID="bpftool-debuginfo-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">bpftool-debuginfo-5.10.0-226.0.0.125.oe2203sp4.x86_64.rpm</FullProductName>
			<FullProductName ProductID="kernel-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">kernel-5.10.0-226.0.0.125.oe2203sp4.x86_64.rpm</FullProductName>
			<FullProductName ProductID="kernel-debuginfo-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">kernel-debuginfo-5.10.0-226.0.0.125.oe2203sp4.x86_64.rpm</FullProductName>
			<FullProductName ProductID="kernel-debugsource-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">kernel-debugsource-5.10.0-226.0.0.125.oe2203sp4.x86_64.rpm</FullProductName>
			<FullProductName ProductID="kernel-devel-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">kernel-devel-5.10.0-226.0.0.125.oe2203sp4.x86_64.rpm</FullProductName>
			<FullProductName ProductID="kernel-headers-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">kernel-headers-5.10.0-226.0.0.125.oe2203sp4.x86_64.rpm</FullProductName>
			<FullProductName ProductID="kernel-source-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">kernel-source-5.10.0-226.0.0.125.oe2203sp4.x86_64.rpm</FullProductName>
			<FullProductName ProductID="kernel-tools-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">kernel-tools-5.10.0-226.0.0.125.oe2203sp4.x86_64.rpm</FullProductName>
			<FullProductName ProductID="kernel-tools-debuginfo-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">kernel-tools-debuginfo-5.10.0-226.0.0.125.oe2203sp4.x86_64.rpm</FullProductName>
			<FullProductName ProductID="kernel-tools-devel-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">kernel-tools-devel-5.10.0-226.0.0.125.oe2203sp4.x86_64.rpm</FullProductName>
			<FullProductName ProductID="perf-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">perf-5.10.0-226.0.0.125.oe2203sp4.x86_64.rpm</FullProductName>
			<FullProductName ProductID="perf-debuginfo-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">perf-debuginfo-5.10.0-226.0.0.125.oe2203sp4.x86_64.rpm</FullProductName>
			<FullProductName ProductID="python3-perf-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">python3-perf-5.10.0-226.0.0.125.oe2203sp4.x86_64.rpm</FullProductName>
			<FullProductName ProductID="python3-perf-debuginfo-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">python3-perf-debuginfo-5.10.0-226.0.0.125.oe2203sp4.x86_64.rpm</FullProductName>
		</Branch>
		<Branch Type="Package Arch" Name="src">
			<FullProductName ProductID="kernel-5.10.0-226.0.0.125" CPE="cpe:/a:openEuler:openEuler:22.03-LTS-SP4">kernel-5.10.0-226.0.0.125.oe2203sp4.src.rpm</FullProductName>
		</Branch>
	</ProductTree>
	<Vulnerability Ordinal="1" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

ibmvnic: don&apos;t release napi in __ibmvnic_open()

If __ibmvnic_open() encounters an error such as when setting link state,
it calls release_resources() which frees the napi structures needlessly.
Instead, have __ibmvnic_open() only clean up the work it did so far (i.e.
disable napi and irqs) and leave the rest to the callers.

If caller of __ibmvnic_open() is ibmvnic_open(), it should release the
resources immediately. If the caller is do_reset() or do_hard_reset(),
they will release the resources on the next reset.

This fixes following crash that occurred when running the drmgr command
several times to add/remove a vnic interface:

	[102056] ibmvnic 30000003 env3: Disabling rx_scrq[6] irq
	[102056] ibmvnic 30000003 env3: Disabling rx_scrq[7] irq
	[102056] ibmvnic 30000003 env3: Replenished 8 pools
	Kernel attempted to read user page (10) - exploit attempt? (uid: 0)
	BUG: Kernel NULL pointer dereference on read at 0x00000010
	Faulting instruction address: 0xc000000000a3c840
	Oops: Kernel access of bad area, sig: 11 [#1]
	LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
	...
	CPU: 9 PID: 102056 Comm: kworker/9:2 Kdump: loaded Not tainted 5.16.0-rc5-autotest-g6441998e2e37 #1
	Workqueue: events_long __ibmvnic_reset [ibmvnic]
	NIP:  c000000000a3c840 LR: c0080000029b5378 CTR: c000000000a3c820
	REGS: c0000000548e37e0 TRAP: 0300   Not tainted  (5.16.0-rc5-autotest-g6441998e2e37)
	MSR:  8000000000009033 &lt;SF,EE,ME,IR,DR,RI,LE&gt;  CR: 28248484  XER: 00000004
	CFAR: c0080000029bdd24 DAR: 0000000000000010 DSISR: 40000000 IRQMASK: 0
	GPR00: c0080000029b55d0 c0000000548e3a80 c0000000028f0200 0000000000000000
	...
	NIP [c000000000a3c840] napi_enable+0x20/0xc0
	LR [c0080000029b5378] __ibmvnic_open+0xf0/0x430 [ibmvnic]
	Call Trace:
	[c0000000548e3a80] [0000000000000006] 0x6 (unreliable)
	[c0000000548e3ab0] [c0080000029b55d0] __ibmvnic_open+0x348/0x430 [ibmvnic]
	[c0000000548e3b40] [c0080000029bcc28] __ibmvnic_reset+0x500/0xdf0 [ibmvnic]
	[c0000000548e3c60] [c000000000176228] process_one_work+0x288/0x570
	[c0000000548e3d00] [c000000000176588] worker_thread+0x78/0x660
	[c0000000548e3da0] [c0000000001822f0] kthread+0x1c0/0x1d0
	[c0000000548e3e10] [c00000000000cf64] ret_from_kernel_thread+0x5c/0x64
	Instruction dump:
	7d2948f8 792307e0 4e800020 60000000 3c4c01eb 384239e0 f821ffd1 39430010
	38a0fff6 e92d1100 f9210028 39200000 &lt;e9030010&gt; f9010020 60420000 e9210020
	---[ end trace 5f8033b08fd27706 ]---</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2022-48811</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="2" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

apparmor: Fix null pointer deref when receiving skb during sock creation

The panic below is observed when receiving ICMP packets with secmark set
while an ICMP raw socket is being created. SK_CTX(sk)-&gt;label is updated
in apparmor_socket_post_create(), but the packet is delivered to the
socket before that, causing the null pointer dereference.
Drop the packet if label context is not set.

    BUG: kernel NULL pointer dereference, address: 000000000000004c
    #PF: supervisor read access in kernel mode
    #PF: error_code(0x0000) - not-present page
    PGD 0 P4D 0
    Oops: 0000 [#1] PREEMPT SMP NOPTI
    CPU: 0 PID: 407 Comm: a.out Not tainted 6.4.12-arch1-1 #1 3e6fa2753a2d75925c34ecb78e22e85a65d083df
    Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/28/2020
    RIP: 0010:aa_label_next_confined+0xb/0x40
    Code: 00 00 48 89 ef e8 d5 25 0c 00 e9 66 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 89 f0 &lt;8b&gt; 77 4c 39 c6 7e 1f 48 63 d0 48 8d 14 d7 eb 0b 83 c0 01 48 83 c2
    RSP: 0018:ffffa92940003b08 EFLAGS: 00010246
    RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000e
    RDX: ffffa92940003be8 RSI: 0000000000000000 RDI: 0000000000000000
    RBP: ffff8b57471e7800 R08: ffff8b574c642400 R09: 0000000000000002
    R10: ffffffffbd820eeb R11: ffffffffbeb7ff00 R12: ffff8b574c642400
    R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000000
    FS:  00007fb092ea7640(0000) GS:ffff8b577bc00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 000000000000004c CR3: 00000001020f2005 CR4: 00000000007706f0
    PKRU: 55555554
    Call Trace:
     &lt;IRQ&gt;
     ? __die+0x23/0x70
     ? page_fault_oops+0x171/0x4e0
     ? exc_page_fault+0x7f/0x180
     ? asm_exc_page_fault+0x26/0x30
     ? aa_label_next_confined+0xb/0x40
     apparmor_secmark_check+0xec/0x330
     security_sock_rcv_skb+0x35/0x50
     sk_filter_trim_cap+0x47/0x250
     sock_queue_rcv_skb_reason+0x20/0x60
     raw_rcv+0x13c/0x210
     raw_local_deliver+0x1f3/0x250
     ip_protocol_deliver_rcu+0x4f/0x2f0
     ip_local_deliver_finish+0x76/0xa0
     __netif_receive_skb_one_core+0x89/0xa0
     netif_receive_skb+0x119/0x170
     ? __netdev_alloc_skb+0x3d/0x140
     vmxnet3_rq_rx_complete+0xb23/0x1010 [vmxnet3 56a84f9c97178c57a43a24ec073b45a9d6f01f3a]
     vmxnet3_poll_rx_only+0x36/0xb0 [vmxnet3 56a84f9c97178c57a43a24ec073b45a9d6f01f3a]
     __napi_poll+0x28/0x1b0
     net_rx_action+0x2a4/0x380
     __do_softirq+0xd1/0x2c8
     __irq_exit_rcu+0xbb/0xf0
     common_interrupt+0x86/0xa0
     &lt;/IRQ&gt;
     &lt;TASK&gt;
     asm_common_interrupt+0x26/0x40
    RIP: 0010:apparmor_socket_post_create+0xb/0x200
    Code: 08 48 85 ff 75 a1 eb b1 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 &lt;55&gt; 48 89 fd 53 45 85 c0 0f 84 b2 00 00 00 48 8b 1d 80 56 3f 02 48
    RSP: 0018:ffffa92940ce7e50 EFLAGS: 00000286
    RAX: ffffffffbc756440 RBX: 0000000000000000 RCX: 0000000000000001
    RDX: 0000000000000003 RSI: 0000000000000002 RDI: ffff8b574eaab740
    RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
    R10: ffff8b57444cec70 R11: 0000000000000000 R12: 0000000000000003
    R13: 0000000000000002 R14: ffff8b574eaab740 R15: ffffffffbd8e4748
     ? __pfx_apparmor_socket_post_create+0x10/0x10
     security_socket_post_create+0x4b/0x80
     __sock_create+0x176/0x1f0
     __sys_socket+0x89/0x100
     __x64_sys_socket+0x17/0x20
     do_syscall_64+0x5d/0x90
     ? do_syscall_64+0x6c/0x90
     ? do_syscall_64+0x6c/0x90
     ? do_syscall_64+0x6c/0x90
     entry_SYSCALL_64_after_hwframe+0x72/0xdc</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2023-52889</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="3" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

netfilter: nf_tables: restore set elements when delete set fails

From abort path, nft_mapelem_activate() needs to restore refcounters to
the original state. Currently, it uses the set-&gt;ops-&gt;walk() to iterate
over these set elements. The existing set iterator skips inactive
elements in the next generation, this does not work from the abort path
to restore the original state since it has to skip active elements
instead (not inactive ones).

This patch moves the check for inactive elements to the set iterator
callback, then it reverses the logic for the .activate case which
needs to skip active elements.

Toggle next generation bit for elements when delete set command is
invoked and call nft_clear() from .activate (abort) path to restore the
next generation bit.

The splat below shows an object in mappings memleak:

[43929.457523] ------------[ cut here ]------------
[43929.457532] WARNING: CPU: 0 PID: 1139 at include/net/netfilter/nf_tables.h:1237 nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[...]
[43929.458014] RIP: 0010:nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458076] Code: 83 f8 01 77 ab 49 8d 7c 24 08 e8 37 5e d0 de 49 8b 6c 24 08 48 8d 7d 50 e8 e9 5c d0 de 8b 45 50 8d 50 ff 89 55 50 85 c0 75 86 &lt;0f&gt; 0b eb 82 0f 0b eb b3 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90
[43929.458081] RSP: 0018:ffff888140f9f4b0 EFLAGS: 00010246
[43929.458086] RAX: 0000000000000000 RBX: ffff8881434f5288 RCX: dffffc0000000000
[43929.458090] RDX: 00000000ffffffff RSI: ffffffffa26d28a7 RDI: ffff88810ecc9550
[43929.458093] RBP: ffff88810ecc9500 R08: 0000000000000001 R09: ffffed10281f3e8f
[43929.458096] R10: 0000000000000003 R11: ffff0000ffff0000 R12: ffff8881434f52a0
[43929.458100] R13: ffff888140f9f5f4 R14: ffff888151c7a800 R15: 0000000000000002
[43929.458103] FS:  00007f0c687c4740(0000) GS:ffff888390800000(0000) knlGS:0000000000000000
[43929.458107] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[43929.458111] CR2: 00007f58dbe5b008 CR3: 0000000123602005 CR4: 00000000001706f0
[43929.458114] Call Trace:
[43929.458118]  &lt;TASK&gt;
[43929.458121]  ? __warn+0x9f/0x1a0
[43929.458127]  ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458188]  ? report_bug+0x1b1/0x1e0
[43929.458196]  ? handle_bug+0x3c/0x70
[43929.458200]  ? exc_invalid_op+0x17/0x40
[43929.458211]  ? nft_setelem_data_deactivate+0xd7/0xf0 [nf_tables]
[43929.458271]  ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458332]  nft_mapelem_deactivate+0x24/0x30 [nf_tables]
[43929.458392]  nft_rhash_walk+0xdd/0x180 [nf_tables]
[43929.458453]  ? __pfx_nft_rhash_walk+0x10/0x10 [nf_tables]
[43929.458512]  ? rb_insert_color+0x2e/0x280
[43929.458520]  nft_map_deactivate+0xdc/0x1e0 [nf_tables]
[43929.458582]  ? __pfx_nft_map_deactivate+0x10/0x10 [nf_tables]
[43929.458642]  ? __pfx_nft_mapelem_deactivate+0x10/0x10 [nf_tables]
[43929.458701]  ? __rcu_read_unlock+0x46/0x70
[43929.458709]  nft_delset+0xff/0x110 [nf_tables]
[43929.458769]  nft_flush_table+0x16f/0x460 [nf_tables]
[43929.458830]  nf_tables_deltable+0x501/0x580 [nf_tables]</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-27012</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="4" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

netfilter: nf_tables: do not compare internal table flags on updates

Restore skipping transaction if table update does not modify flags.</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-27065</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="5" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

nilfs2: fix potential kernel bug due to lack of writeback flag waiting

Destructive writes to a block device on which nilfs2 is mounted can cause
a kernel bug in the folio/page writeback start routine or writeback end
routine (__folio_start_writeback in the log below):

 kernel BUG at mm/page-writeback.c:3070!
 Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
 ...
 RIP: 0010:__folio_start_writeback+0xbaa/0x10e0
 Code: 25 ff 0f 00 00 0f 84 18 01 00 00 e8 40 ca c6 ff e9 17 f6 ff ff
  e8 36 ca c6 ff 4c 89 f7 48 c7 c6 80 c0 12 84 e8 e7 b3 0f 00 90 &lt;0f&gt;
  0b e8 1f ca c6 ff 4c 89 f7 48 c7 c6 a0 c6 12 84 e8 d0 b3 0f 00
 ...
 Call Trace:
  &lt;TASK&gt;
  nilfs_segctor_do_construct+0x4654/0x69d0 [nilfs2]
  nilfs_segctor_construct+0x181/0x6b0 [nilfs2]
  nilfs_segctor_thread+0x548/0x11c0 [nilfs2]
  kthread+0x2f0/0x390
  ret_from_fork+0x4b/0x80
  ret_from_fork_asm+0x1a/0x30
  &lt;/TASK&gt;

This is because when the log writer starts a writeback for segment summary
blocks or a super root block that use the backing device&apos;s page cache, it
does not wait for the ongoing folio/page writeback, resulting in an
inconsistent writeback state.

Fix this issue by waiting for ongoing writebacks when putting
folios/pages on the backing device into writeback state.</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-37078</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Low</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>3.3</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="6" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

scsi: mpt3sas: Avoid test/set_bit() operating in non-allocated memory

There is a potential out-of-bounds access when using test_bit() on a single
word. The test_bit() and set_bit() functions operate on long values, and
when testing or setting a single word, they can exceed the word
boundary. KASAN detects this issue and produces a dump:

	 BUG: KASAN: slab-out-of-bounds in _scsih_add_device.constprop.0 (./arch/x86/include/asm/bitops.h:60 ./include/asm-generic/bitops/instrumented-atomic.h:29 drivers/scsi/mpt3sas/mpt3sas_scsih.c:7331) mpt3sas

	 Write of size 8 at addr ffff8881d26e3c60 by task kworker/u1536:2/2965

For full log, please look at [1].

Make the allocation at least the size of sizeof(unsigned long) so that
set_bit() and test_bit() have sufficient room for read/write operations
without overwriting unallocated memory.

[1] Link: https://lore.kernel.org/all/ZkNcALr3W3KGYYJG@gmail.com/</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-40901</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>6.6</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:L</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="7" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

drm/amdgpu: change vm-&gt;task_info handling

This patch changes the handling and lifecycle of vm-&gt;task_info object.
The major changes are:
- vm-&gt;task_info is a dynamically allocated ptr now, and its uasge is
  reference counted.
- introducing two new helper funcs for task_info lifecycle management
    - amdgpu_vm_get_task_info: reference counts up task_info before
      returning this info
    - amdgpu_vm_put_task_info: reference counts down task_info
- last put to task_info() frees task_info from the vm.

This patch also does logistical changes required for existing usage
of vm-&gt;task_info.

V2: Do not block all the prints when task_info not found (Felix)

V3: Fixed review comments from Felix
   - Fix wrong indentation
   - No debug message for -ENOMEM
   - Add NULL check for task_info
   - Do not duplicate the debug messages (ti vs no ti)
   - Get first reference of task_info in vm_init(), put last
     in vm_fini()

V4: Fixed review comments from Felix
   - fix double reference increment in create_task_info
   - change amdgpu_vm_get_task_info_pasid
   - additional changes in amdgpu_gem.c while porting</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-41008</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>4.4</BaseScore>
				<Vector>AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="8" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

ocfs2: strict bound check before memcmp in ocfs2_xattr_find_entry()

xattr in ocfs2 maybe &apos;non-indexed&apos;, which saved with additional space
requested.  It&apos;s better to check if the memory is out of bound before
memcmp, although this possibility mainly comes from crafted poisonous
images.</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-41016</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:N</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="9" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

drm/radeon: check bo_va-&gt;bo is non-NULL before using it

The call to radeon_vm_clear_freed might clear bo_va-&gt;bo, so
we have to check it before dereferencing it.</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-41060</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="10" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

nvme-fabrics: use reserved tag for reg read/write command

In some scenarios, if too many commands are issued by nvme command in
the same time by user tasks, this may exhaust all tags of admin_q. If
a reset (nvme reset or IO timeout) occurs before these commands finish,
reconnect routine may fail to update nvme regs due to insufficient tags,
which will cause kernel hang forever. In order to workaround this issue,
maybe we can let reg_read32()/reg_read64()/reg_write32() use reserved
tags. This maybe safe for nvmf:

1. For the disable ctrl path,  we will not issue connect command
2. For the enable ctrl / fw activate path, since connect and reg_xx()
   are called serially.

So the reserved tags may still be enough while reg_xx() use reserved tags.</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-41082</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="11" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isrWhen del_timer_sync() is called in an interrupt context it throws a warningbecause of potential deadlock. The timer is used only to exit fromwait_for_completion() after a timeout so replacing the call withwait_for_completion_timeout() allows to remove the problematic timer andits related functions altogether.</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-42153</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="12" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:powerpc/pseries: Fix scv instruction crash with kexeckexec on pseries disables AIL (reloc_on_exc), required for scvinstruction support, before other CPUs have been shut down. This meansthey can execute scv instructions after AIL is disabled, which causes aninterrupt at an unexpected entry location that crashes the kernel.Change the kexec sequence to disable AIL after other CPUs have beenbrought down.As a refresher, the real-mode scv interrupt vector is 0x17000, and thefixed-location head code probably couldn t easily deal with implementingsuch high addresses so it was just decided not to support that interruptat all.</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-42230</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>4.4</BaseScore>
				<Vector>AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="13" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

drm/i915/gem: Fix Virtual Memory mapping boundaries calculation

Calculating the size of the mapped area as the lesser value
between the requested size and the actual size does not consider
the partial mapping offset. This can cause page fault access.

Fix the calculation of the starting and ending addresses, the
total size is now deduced from the difference between the end and
start addresses.

Additionally, the calculations have been rewritten in a clearer
and more understandable form.

[Joonas: Add Requires: tag]
Requires: 60a2066c5005 (&quot;drm/i915/gem: Adjust vma offset for framebuffer mmap offset&quot;)
(cherry picked from commit 97b6784753da06d9d40232328efc5c5367e53417)</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-42259</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>4.1</BaseScore>
				<Vector>AV:L/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="14" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

riscv/mm: Add handling for VM_FAULT_SIGSEGV in mm_fault_error()

Handle VM_FAULT_SIGSEGV in the page fault path so that we correctly
kill the process and we don&apos;t BUG() the kernel.</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-42267</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Low</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>3.9</BaseScore>
				<Vector>AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="15" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

scsi: qla2xxx: validate nvme_local_port correctly

The driver load failed with error message,

qla2xxx [0000:04:00.0]-ffff:0: register_localport failed: ret=ffffffef

and with a kernel crash,

	BUG: unable to handle kernel NULL pointer dereference at 0000000000000070
	Workqueue: events_unbound qla_register_fcport_fn [qla2xxx]
	RIP: 0010:nvme_fc_register_remoteport+0x16/0x430 [nvme_fc]
	RSP: 0018:ffffaaa040eb3d98 EFLAGS: 00010282
	RAX: 0000000000000000 RBX: ffff9dfb46b78c00 RCX: 0000000000000000
	RDX: ffff9dfb46b78da8 RSI: ffffaaa040eb3e08 RDI: 0000000000000000
	RBP: ffff9dfb612a0a58 R08: ffffffffaf1d6270 R09: 3a34303a30303030
	R10: 34303a303030305b R11: 2078787832616c71 R12: ffff9dfb46b78dd4
	R13: ffff9dfb46b78c24 R14: ffff9dfb41525300 R15: ffff9dfb46b78da8
	FS:  0000000000000000(0000) GS:ffff9dfc67c00000(0000) knlGS:0000000000000000
	CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
	CR2: 0000000000000070 CR3: 000000018da10004 CR4: 00000000000206f0
	Call Trace:
	qla_nvme_register_remote+0xeb/0x1f0 [qla2xxx]
	? qla2x00_dfs_create_rport+0x231/0x270 [qla2xxx]
	qla2x00_update_fcport+0x2a1/0x3c0 [qla2xxx]
	qla_register_fcport_fn+0x54/0xc0 [qla2xxx]

Exit the qla_nvme_register_remote() function when qla_nvme_register_hba()
fails and correctly validate nvme_local_port.</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-42286</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="16" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

scsi: qla2xxx: Complete command early within lock

A crash was observed while performing NPIV and FW reset,

 BUG: kernel NULL pointer dereference, address: 000000000000001c
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 1 PREEMPT_RT SMP NOPTI
 RIP: 0010:dma_direct_unmap_sg+0x51/0x1e0
 RSP: 0018:ffffc90026f47b88 EFLAGS: 00010246
 RAX: 0000000000000000 RBX: 0000000000000021 RCX: 0000000000000002
 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff8881041130d0
 RBP: ffff8881041130d0 R08: 0000000000000000 R09: 0000000000000034
 R10: ffffc90026f47c48 R11: 0000000000000031 R12: 0000000000000000
 R13: 0000000000000000 R14: ffff8881565e4a20 R15: 0000000000000000
 FS: 00007f4c69ed3d00(0000) GS:ffff889faac80000(0000) knlGS:0000000000000000
 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000000000000001c CR3: 0000000288a50002 CR4: 00000000007706e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 PKRU: 55555554
 Call Trace:
 &lt;TASK&gt;
 ? __die_body+0x1a/0x60
 ? page_fault_oops+0x16f/0x4a0
 ? do_user_addr_fault+0x174/0x7f0
 ? exc_page_fault+0x69/0x1a0
 ? asm_exc_page_fault+0x22/0x30
 ? dma_direct_unmap_sg+0x51/0x1e0
 ? preempt_count_sub+0x96/0xe0
 qla2xxx_qpair_sp_free_dma+0x29f/0x3b0 [qla2xxx]
 qla2xxx_qpair_sp_compl+0x60/0x80 [qla2xxx]
 __qla2x00_abort_all_cmds+0xa2/0x450 [qla2xxx]

The command completion was done early while aborting the commands in driver
unload path but outside lock to avoid the WARN_ON condition of performing
dma_free_attr within the lock. However this caused race condition while
command completion via multiple paths causing system crash.

Hence complete the command early in unload path but within the lock to
avoid race condition.</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-42287</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="17" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

nilfs2: handle inconsistent state in nilfs_btnode_create_block()

Syzbot reported that a buffer state inconsistency was detected in
nilfs_btnode_create_block(), triggering a kernel bug.

It is not appropriate to treat this inconsistency as a bug; it can occur
if the argument block address (the buffer index of the newly created
block) is a virtual block number and has been reallocated due to
corruption of the bitmap used to manage its allocation state.

So, modify nilfs_btnode_create_block() and its callers to treat it as a
possible filesystem error, rather than triggering a kernel bug.</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-42295</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="18" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

fs/ntfs3: Update log-&gt;page_{mask,bits} if log-&gt;page_size changed

If an NTFS file system is mounted to another system with different
PAGE_SIZE from the original system, log-&gt;page_size will change in
log_replay(), but log-&gt;page_{mask,bits} don&apos;t change correspondingly.
This will cause a panic because &quot;u32 bytes = log-&gt;page_size - page_off&quot;
will get a negative value in the later read_log_page().</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-42299</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="19" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

sysctl: always initialize i_uid/i_gid

Always initialize i_uid/i_gid inside the sysfs core so set_ownership()
can safely skip setting them.

Commit 5ec27ec735ba (&quot;fs/proc/proc_sysctl.c: fix the default values of
i_uid/i_gid on /proc/sys inodes.&quot;) added defaults for i_uid/i_gid when
set_ownership() was not implemented. It also missed adjusting
net_ctl_set_ownership() to use the same default values in case the
computation of a better value failed.</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-42312</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="20" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:PCI: endpoint: pci-epf-test: Make use of cached  epc_features  in pci_epf_test_core_init()Instead of getting the epc_features from pci_epc_get_features() API, usethe cached pci_epf_test::epc_features value to avoid the NULL check. Sincethe NULL check is already performed in pci_epf_test_bind(), having one morecheck in pci_epf_test_core_init() is redundant and it is not possible tohit the NULL pointer dereference.Also with commit a01e7214bef9 ( PCI: endpoint: Remove  core_init_notifier flag ),  epc_features  got dereferenced without the NULL check, leading tothe following false positive Smatch warning:  drivers/pci/endpoint/functions/pci-epf-test.c:784 pci_epf_test_core_init() error: we previously assumed  epc_features  could be null (see line 747)Thus, remove the redundant NULL check and also use the epc_features::{msix_capable/msi_capable} flags directly to avoid local variables.[kwilczynski: commit log]</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-43824</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="21" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

xdp: fix invalid wait context of page_pool_destroy()

If the driver uses a page pool, it creates a page pool with
page_pool_create().
The reference count of page pool is 1 as default.
A page pool will be destroyed only when a reference count reaches 0.
page_pool_destroy() is used to destroy page pool, it decreases a
reference count.
When a page pool is destroyed, -&gt;disconnect() is called, which is
mem_allocator_disconnect().
This function internally acquires mutex_lock().

If the driver uses XDP, it registers a memory model with
xdp_rxq_info_reg_mem_model().
The xdp_rxq_info_reg_mem_model() internally increases a page pool
reference count if a memory model is a page pool.
Now the reference count is 2.

To destroy a page pool, the driver should call both page_pool_destroy()
and xdp_unreg_mem_model().
The xdp_unreg_mem_model() internally calls page_pool_destroy().
Only page_pool_destroy() decreases a reference count.

If a driver calls page_pool_destroy() then xdp_unreg_mem_model(), we
will face an invalid wait context warning.
Because xdp_unreg_mem_model() calls page_pool_destroy() with
rcu_read_lock().
The page_pool_destroy() internally acquires mutex_lock().

Splat looks like:
=============================
[ BUG: Invalid wait context ]
6.10.0-rc6+ #4 Tainted: G W
-----------------------------
ethtool/1806 is trying to lock:
ffffffff90387b90 (mem_id_lock){+.+.}-{4:4}, at: mem_allocator_disconnect+0x73/0x150
other info that might help us debug this:
context-{5:5}
3 locks held by ethtool/1806:
stack backtrace:
CPU: 0 PID: 1806 Comm: ethtool Tainted: G W 6.10.0-rc6+ #4 f916f41f172891c800f2fed
Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
Call Trace:
&lt;TASK&gt;
dump_stack_lvl+0x7e/0xc0
__lock_acquire+0x1681/0x4de0
? _printk+0x64/0xe0
? __pfx_mark_lock.part.0+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
lock_acquire+0x1b3/0x580
? mem_allocator_disconnect+0x73/0x150
? __wake_up_klogd.part.0+0x16/0xc0
? __pfx_lock_acquire+0x10/0x10
? dump_stack_lvl+0x91/0xc0
__mutex_lock+0x15c/0x1690
? mem_allocator_disconnect+0x73/0x150
? __pfx_prb_read_valid+0x10/0x10
? mem_allocator_disconnect+0x73/0x150
? __pfx_llist_add_batch+0x10/0x10
? console_unlock+0x193/0x1b0
? lockdep_hardirqs_on+0xbe/0x140
? __pfx___mutex_lock+0x10/0x10
? tick_nohz_tick_stopped+0x16/0x90
? __irq_work_queue_local+0x1e5/0x330
? irq_work_queue+0x39/0x50
? __wake_up_klogd.part.0+0x79/0xc0
? mem_allocator_disconnect+0x73/0x150
mem_allocator_disconnect+0x73/0x150
? __pfx_mem_allocator_disconnect+0x10/0x10
? mark_held_locks+0xa5/0xf0
? rcu_is_watching+0x11/0xb0
page_pool_release+0x36e/0x6d0
page_pool_destroy+0xd7/0x440
xdp_unreg_mem_model+0x1a7/0x2a0
? __pfx_xdp_unreg_mem_model+0x10/0x10
? kfree+0x125/0x370
? bnxt_free_ring.isra.0+0x2eb/0x500
? bnxt_free_mem+0x5ac/0x2500
xdp_rxq_info_unreg+0x4a/0xd0
bnxt_free_mem+0x1356/0x2500
bnxt_close_nic+0xf0/0x3b0
? __pfx_bnxt_close_nic+0x10/0x10
? ethnl_parse_bit+0x2c6/0x6d0
? __pfx___nla_validate_parse+0x10/0x10
? __pfx_ethnl_parse_bit+0x10/0x10
bnxt_set_features+0x2a8/0x3e0
__netdev_update_features+0x4dc/0x1370
? ethnl_parse_bitset+0x4ff/0x750
? __pfx_ethnl_parse_bitset+0x10/0x10
? __pfx___netdev_update_features+0x10/0x10
? mark_held_locks+0xa5/0xf0
? _raw_spin_unlock_irqrestore+0x42/0x70
? __pm_runtime_resume+0x7d/0x110
ethnl_set_features+0x32d/0xa20

To fix this problem, it uses rhashtable_lookup_fast() instead of
rhashtable_lookup() with rcu_read_lock().
Using xa without rcu_read_lock() here is safe.
xa is freed by __xdp_mem_allocator_rcu_free() and this is called by
call_rcu() of mem_xa_remove().
The mem_xa_remove() is called by page_pool_destroy() if a reference
count reaches 0.
The xa is already protected by the reference count mechanism well in the
control plane.
So removing rcu_read_lock() for page_pool_destroy() is safe.</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-43834</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="22" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

block: initialize integrity buffer to zero before writing it to media

Metadata added by bio_integrity_prep is using plain kmalloc, which leads
to random kernel memory being written media.  For PI metadata this is
limited to the app tag that isn&apos;t used by kernel generated metadata,
but for non-PI metadata the entire buffer leaks kernel memory.

Fix this by adding the __GFP_ZERO flag to allocations for writes.</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-43854</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="23" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

usb: vhci-hcd: Do not drop references before new references are gained

At a few places the driver carries stale pointers
to references that can still be used. Make sure that does not happen.
This strictly speaking closes ZDI-CAN-22273, though there may be
similar races in the driver.</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-43883</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="24" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

Bluetooth: MGMT: Add error handling to pair_device()

hci_conn_params_add() never checks for a NULL value and could lead to a NULL
pointer dereference causing a crash.

Fixed by adding error handling in the function.</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-43884</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="25" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:padata: Fix possible divide-by-0 panic in padata_mt_helper()We are hit with a not easily reproducible divide-by-0 panic in padata.c atbootup time.  [   10.017908] Oops: divide error: 0000 1 PREEMPT SMP NOPTI  [   10.017908] CPU: 26 PID: 2627 Comm: kworker/u1666:1 Not tainted 6.10.0-15.el10.x86_64 #1  [   10.017908] Hardware name: Lenovo ThinkSystem SR950 [7X12CTO1WW]/[7X12CTO1WW], BIOS [PSE140J-2.30] 07/20/2021  [   10.017908] Workqueue: events_unbound padata_mt_helper  [   10.017908] RIP: 0010:padata_mt_helper+0x39/0xb0    :  [   10.017963] Call Trace:  [   10.017968]  &lt;TASK&gt;  [   10.018004]  ? padata_mt_helper+0x39/0xb0  [   10.018084]  process_one_work+0x174/0x330  [   10.018093]  worker_thread+0x266/0x3a0  [   10.018111]  kthread+0xcf/0x100  [   10.018124]  ret_from_fork+0x31/0x50  [   10.018138]  ret_from_fork_asm+0x1a/0x30  [   10.018147]  &lt;/TASK&gt;Looking at the padata_mt_helper() function, the only way a divide-by-0panic can happen is when ps-&gt;chunk_size is 0.  The way that chunk_size isinitialized in padata_do_multithreaded(), chunk_size can be 0 when themin_chunk in the passed-in padata_mt_job structure is 0.Fix this divide-by-0 panic by making sure that chunk_size will be at least1 no matter what the input parameters are.</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-43889</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="26" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

tracing: Fix overflow in get_free_elt()

&quot;tracing_map-&gt;next_elt&quot; in get_free_elt() is at risk of overflowing.

Once it overflows, new elements can still be inserted into the tracing_map
even though the maximum number of elements (`max_elts`) has been reached.
Continuing to insert elements after the overflow could result in the
tracing_map containing &quot;tracing_map-&gt;max_size&quot; elements, leaving no empty
entries.
If any attempt is made to insert an element into a full tracing_map using
`__tracing_map_insert()`, it will cause an infinite loop with preemption
disabled, leading to a CPU hang problem.

Fix this by preventing any further increments to &quot;tracing_map-&gt;next_elt&quot;
once it reaches &quot;tracing_map-&gt;max_elt&quot;.</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-43890</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="27" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

ext4: sanity check for NULL pointer after ext4_force_shutdown

Test case: 2 threads write short inline data to a file.
In ext4_page_mkwrite the resulting inline data is converted.
Handling ext4_grp_locked_error with description &quot;block bitmap
and bg descriptor inconsistent: X vs Y free clusters&quot; calls
ext4_force_shutdown. The conversion clears
EXT4_STATE_MAY_INLINE_DATA but fails for
ext4_destroy_inline_data_nolock and ext4_mark_iloc_dirty due
to ext4_forced_shutdown. The restoration of inline data fails
for the same reason not setting EXT4_STATE_MAY_INLINE_DATA.
Without the flag set a regular process path in ext4_da_write_end
follows trying to dereference page folio private pointer that has
not been set. The fix calls early return with -EIO error shall the
pointer to private be NULL.

Sample crash report:

Unable to handle kernel paging request at virtual address dfff800000000004
KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]
Mem abort info:
  ESR = 0x0000000096000005
  EC = 0x25: DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
  FSC = 0x05: level 1 translation fault
Data abort info:
  ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
  CM = 0, WnR = 0, TnD = 0, TagAccess = 0
  GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[dfff800000000004] address between user and kernel address ranges
Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 20274 Comm: syz-executor185 Not tainted 6.9.0-rc7-syzkaller-gfda5695d692c #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __block_commit_write+0x64/0x2b0 fs/buffer.c:2167
lr : __block_commit_write+0x3c/0x2b0 fs/buffer.c:2160
sp : ffff8000a1957600
x29: ffff8000a1957610 x28: dfff800000000000 x27: ffff0000e30e34b0
x26: 0000000000000000 x25: dfff800000000000 x24: dfff800000000000
x23: fffffdffc397c9e0 x22: 0000000000000020 x21: 0000000000000020
x20: 0000000000000040 x19: fffffdffc397c9c0 x18: 1fffe000367bd196
x17: ffff80008eead000 x16: ffff80008ae89e3c x15: 00000000200000c0
x14: 1fffe0001cbe4e04 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000001 x10: 0000000000ff0100 x9 : 0000000000000000
x8 : 0000000000000004 x7 : 0000000000000000 x6 : 0000000000000000
x5 : fffffdffc397c9c0 x4 : 0000000000000020 x3 : 0000000000000020
x2 : 0000000000000040 x1 : 0000000000000020 x0 : fffffdffc397c9c0
Call trace:
 __block_commit_write+0x64/0x2b0 fs/buffer.c:2167
 block_write_end+0xb4/0x104 fs/buffer.c:2253
 ext4_da_do_write_end fs/ext4/inode.c:2955 [inline]
 ext4_da_write_end+0x2c4/0xa40 fs/ext4/inode.c:3028
 generic_perform_write+0x394/0x588 mm/filemap.c:3985
 ext4_buffered_write_iter+0x2c0/0x4ec fs/ext4/file.c:299
 ext4_file_write_iter+0x188/0x1780
 call_write_iter include/linux/fs.h:2110 [inline]
 new_sync_write fs/read_write.c:497 [inline]
 vfs_write+0x968/0xc3c fs/read_write.c:590
 ksys_write+0x15c/0x26c fs/read_write.c:643
 __do_sys_write fs/read_write.c:655 [inline]
 __se_sys_write fs/read_write.c:652 [inline]
 __arm64_sys_write+0x7c/0x90 fs/read_write.c:652
 __invoke_syscall arch/arm64/kernel/syscall.c:34 [inline]
 invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:48
 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:133
 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:152
 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712
 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730
 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598
Code: 97f85911 f94002da 91008356 d343fec8 (38796908)
---[ end trace 0000000000000000 ]---
----------------
Code disassembly (best guess):
   0:	97f85911 	bl	0xffffffffffe16444
   4:	f94002da 	ldr	x26, [x22]
   8:	91008356 	add	x22, x26, #0x20
   c:	d343fec8 	lsr	x8, x22, #3
* 10:	38796908 	ldrb	w8, [x8, x25] &lt;-- trapping instruction</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-43898</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="28" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

drm/amd/display: Add null checker before passing variables

Checks null pointer before passing variables to functions.

This fixes 3 NULL_RETURNS issues reported by Coverity.</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-43902</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="29" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:drm/amd/pm: Fix the null pointer dereference for vega10_hwmgrCheck return value and conduct null pointer handling to avoid null pointer dereference.</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-43905</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="30" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: Fix the null pointer dereference to ras_managerCheck ras_manager before using it</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-43908</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="31" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:net: bridge: mcast: wait for previous gc cycles when removing portsyzbot hit a use-after-free[1] which is caused because the bridge doesn tmake sure that all previous garbage has been collected when removing aport. What happens is:      CPU 1                   CPU 2 start gc cycle           remove port                         acquire gc lock first wait for lock                         call br_multicasg_gc() directly acquire lock now but    free port the port can be freed while grp timers still runningMake sure all previous gc cycles have finished by using flush_work beforefreeing the port.[1]  BUG: KASAN: slab-use-after-free in br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861  Read of size 8 at addr ffff888071d6d000 by task syz.5.1232/9699  CPU: 1 PID: 9699 Comm: syz.5.1232 Not tainted 6.10.0-rc5-syzkaller-00021-g24ca36a562d6 #0  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024  Call Trace:   &lt;IRQ&gt;   __dump_stack lib/dump_stack.c:88 [inline]   dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114   print_address_description mm/kasan/report.c:377 [inline]   print_report+0xc3/0x620 mm/kasan/report.c:488   kasan_report+0xd9/0x110 mm/kasan/report.c:601   br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861   call_timer_fn+0x1a3/0x610 kernel/time/timer.c:1792   expire_timers kernel/time/timer.c:1843 [inline]   __run_timers+0x74b/0xaf0 kernel/time/timer.c:2417   __run_timer_base kernel/time/timer.c:2428 [inline]   __run_timer_base kernel/time/timer.c:2421 [inline]   run_timer_base+0x111/0x190 kernel/time/timer.c:2437</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-44934</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>High</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>7.8</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="32" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

jfs: Fix shift-out-of-bounds in dbDiscardAG

When searching for the next smaller log2 block, BLKSTOL2() returned 0,
causing shift exponent -1 to be negative.

This patch fixes the issue by exiting the loop directly when negative
shift is found.</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-44938</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Low</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>3.9</BaseScore>
				<Vector>AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:L</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="33" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

f2fs: fix to do sanity check on F2FS_INLINE_DATA flag in inode during GC

syzbot reports a f2fs bug as below:

------------[ cut here ]------------
kernel BUG at fs/f2fs/inline.c:258!
CPU: 1 PID: 34 Comm: kworker/u8:2 Not tainted 6.9.0-rc6-syzkaller-00012-g9e4bc4bcae01 #0
RIP: 0010:f2fs_write_inline_data+0x781/0x790 fs/f2fs/inline.c:258
Call Trace:
 f2fs_write_single_data_page+0xb65/0x1d60 fs/f2fs/data.c:2834
 f2fs_write_cache_pages fs/f2fs/data.c:3133 [inline]
 __f2fs_write_data_pages fs/f2fs/data.c:3288 [inline]
 f2fs_write_data_pages+0x1efe/0x3a90 fs/f2fs/data.c:3315
 do_writepages+0x35b/0x870 mm/page-writeback.c:2612
 __writeback_single_inode+0x165/0x10b0 fs/fs-writeback.c:1650
 writeback_sb_inodes+0x905/0x1260 fs/fs-writeback.c:1941
 wb_writeback+0x457/0xce0 fs/fs-writeback.c:2117
 wb_do_writeback fs/fs-writeback.c:2264 [inline]
 wb_workfn+0x410/0x1090 fs/fs-writeback.c:2304
 process_one_work kernel/workqueue.c:3254 [inline]
 process_scheduled_works+0xa12/0x17c0 kernel/workqueue.c:3335
 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416
 kthread+0x2f2/0x390 kernel/kthread.c:388
 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

The root cause is: inline_data inode can be fuzzed, so that there may
be valid blkaddr in its direct node, once f2fs triggers background GC
to migrate the block, it will hit f2fs_bug_on() during dirty page
writeback.

Let&apos;s add sanity check on F2FS_INLINE_DATA flag in inode during GC,
so that, it can forbid migrating inline_data inode&apos;s data block for
fixing.</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-44942</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>High</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>7.8</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="34" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

netfilter: ctnetlink: use helper function to calculate expect ID

Delete expectation path is missing a call to the nf_expect_get_id()
helper function to calculate the expectation ID, otherwise LSB of the
expectation object address is leaked to userspace.</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-44944</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>Medium</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>5.5</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
	<Vulnerability Ordinal="35" xmlns="http://www.icasi.org/CVRF/schema/vuln/1.1">
		<Notes>
			<Note Title="Vulnerability Description" Type="General" Ordinal="1" xml:lang="en">In the Linux kernel, the following vulnerability has been resolved:

kcm: Serialise kcm_sendmsg() for the same socket.

syzkaller reported UAF in kcm_release(). [0]

The scenario is

  1. Thread A builds a skb with MSG_MORE and sets kcm-&gt;seq_skb.

  2. Thread A resumes building skb from kcm-&gt;seq_skb but is blocked
     by sk_stream_wait_memory()

  3. Thread B calls sendmsg() concurrently, finishes building kcm-&gt;seq_skb
     and puts the skb to the write queue

  4. Thread A faces an error and finally frees skb that is already in the
     write queue

  5. kcm_release() does double-free the skb in the write queue

When a thread is building a MSG_MORE skb, another thread must not touch it.

Let&apos;s add a per-sk mutex and serialise kcm_sendmsg().

[0]:
BUG: KASAN: slab-use-after-free in __skb_unlink include/linux/skbuff.h:2366 [inline]
BUG: KASAN: slab-use-after-free in __skb_dequeue include/linux/skbuff.h:2385 [inline]
BUG: KASAN: slab-use-after-free in __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline]
BUG: KASAN: slab-use-after-free in __skb_queue_purge include/linux/skbuff.h:3181 [inline]
BUG: KASAN: slab-use-after-free in kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691
Read of size 8 at addr ffff0000ced0fc80 by task syz-executor329/6167

CPU: 1 PID: 6167 Comm: syz-executor329 Tainted: G    B              6.8.0-rc5-syzkaller-g9abbc24128bc #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Call trace:
 dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:291
 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:298
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:377 [inline]
 print_report+0x178/0x518 mm/kasan/report.c:488
 kasan_report+0xd8/0x138 mm/kasan/report.c:601
 __asan_report_load8_noabort+0x20/0x2c mm/kasan/report_generic.c:381
 __skb_unlink include/linux/skbuff.h:2366 [inline]
 __skb_dequeue include/linux/skbuff.h:2385 [inline]
 __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline]
 __skb_queue_purge include/linux/skbuff.h:3181 [inline]
 kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691
 __sock_release net/socket.c:659 [inline]
 sock_close+0xa4/0x1e8 net/socket.c:1421
 __fput+0x30c/0x738 fs/file_table.c:376
 ____fput+0x20/0x30 fs/file_table.c:404
 task_work_run+0x230/0x2e0 kernel/task_work.c:180
 exit_task_work include/linux/task_work.h:38 [inline]
 do_exit+0x618/0x1f64 kernel/exit.c:871
 do_group_exit+0x194/0x22c kernel/exit.c:1020
 get_signal+0x1500/0x15ec kernel/signal.c:2893
 do_signal+0x23c/0x3b44 arch/arm64/kernel/signal.c:1249
 do_notify_resume+0x74/0x1f4 arch/arm64/kernel/entry-common.c:148
 exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline]
 exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline]
 el0_svc+0xac/0x168 arch/arm64/kernel/entry-common.c:713
 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730
 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598

Allocated by task 6166:
 kasan_save_stack mm/kasan/common.c:47 [inline]
 kasan_save_track+0x40/0x78 mm/kasan/common.c:68
 kasan_save_alloc_info+0x70/0x84 mm/kasan/generic.c:626
 unpoison_slab_object mm/kasan/common.c:314 [inline]
 __kasan_slab_alloc+0x74/0x8c mm/kasan/common.c:340
 kasan_slab_alloc include/linux/kasan.h:201 [inline]
 slab_post_alloc_hook mm/slub.c:3813 [inline]
 slab_alloc_node mm/slub.c:3860 [inline]
 kmem_cache_alloc_node+0x204/0x4c0 mm/slub.c:3903
 __alloc_skb+0x19c/0x3d8 net/core/skbuff.c:641
 alloc_skb include/linux/skbuff.h:1296 [inline]
 kcm_sendmsg+0x1d3c/0x2124 net/kcm/kcmsock.c:783
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 sock_sendmsg+0x220/0x2c0 net/socket.c:768
 splice_to_socket+0x7cc/0xd58 fs/splice.c:889
 do_splice_from fs/splice.c:941 [inline]
 direct_splice_actor+0xec/0x1d8 fs/splice.c:1164
 splice_direct_to_actor+0x438/0xa0c fs/splice.c:1108
 do_splice_direct_actor 
---truncated---</Note>
		</Notes>
		<ReleaseDate>2024-09-06</ReleaseDate>
		<CVE>CVE-2024-44946</CVE>
		<ProductStatuses>
			<Status Type="Fixed">
				<ProductID>openEuler-22.03-LTS-SP4</ProductID>
			</Status>
		</ProductStatuses>
		<Threats>
			<Threat Type="Impact">
				<Description>High</Description>
			</Threat>
		</Threats>
		<CVSSScoreSets>
			<ScoreSet>
				<BaseScore>7.8</BaseScore>
				<Vector>AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H</Vector>
			</ScoreSet>
		</CVSSScoreSets>
		<Remediations>
			<Remediation Type="Vendor Fix">
				<Description>kernel security update</Description>
				<DATE>2024-09-06</DATE>
				<URL>https://www.openeuler.org/zh/security/security-bulletins/detail/?id=openEuler-SA-2024-2107</URL>
			</Remediation>
		</Remediations>
	</Vulnerability>
</cvrfdoc>